Previously samples were dropped on the first incomplete interval and the next complete interval.
Also make sure that the de-duplication is performed just before flushing the aggregate state.
This should help the case then dedup_interval = interval.
For example, if `interval: 1m`, then data flush occurs at the end of every minute,
while `interval: 1h` leads to data flush at the end of every hour.
Add `no_align_flush_to_interval` option, which can be used for disabling the alignment.
The labelsMap struct employs the fact that label indexes are condensed around 0,
so it stores the referred labels in a slice instead of map and uses slice index as label key.
This allows increasing the LabelsCompressor.Decompress performance by up to 3x.
This also reduces the latency of data flush in stream aggregation.
- Reduce memory usage by up to 5x when de-duplicating samples across big number of time series.
- Reduce memory usage by up to 5x when aggregating across big number of output time series.
- Add lib/promutils.LabelsCompressor, which is going to be used by other VictoriaMetrics components
for reducing memory usage for marshaled []prompbmarshal.Label.
- Add `dedup_interval` option at aggregation config, which allows setting individual
deduplication intervals per each aggregation.
- Add `keep_metric_names` option at aggregation config, which allows keeping the original
metric names in the output samples.
- Add `unique_samples` output, which counts the number of unique sample values.
- Add `increase_prometheus` and `total_prometheus` outputs, which ignore the first sample
per each newly encountered time series.
- Use 64-bit hashes instead of marshaled labels as map keys when calculating `count_series` output.
This makes obsolete https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5579
- Expose various metrics, which may help debugging stream aggregation:
- vm_streamaggr_dedup_state_size_bytes - the size of data structures responsible for deduplication
- vm_streamaggr_dedup_state_items_count - the number of items in the deduplication data structures
- vm_streamaggr_labels_compressor_size_bytes - the size of labels compressor data structures
- vm_streamaggr_labels_compressor_items_count - the number of entries in the labels compressor
- vm_streamaggr_flush_duration_seconds - a histogram, which shows the duration of stream aggregation flushes
- vm_streamaggr_dedup_flush_duration_seconds - a histogram, which shows the duration of deduplication flushes
- vm_streamaggr_flush_timeouts_total - counter for timed out stream aggregation flushes,
which took longer than the configured interval
- vm_streamaggr_dedup_flush_timeouts_total - counter for timed out deduplication flushes,
which took longer than the configured dedup_interval
- Actualize docs/stream-aggregation.md
The memory usage reduction increases CPU usage during stream aggregation by up to 30%.
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5850
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5898
- Document the ability to read OpenTelemetry data from Amazon Firehose at docs/CHANGELOG.md
- Simplify parsing Firehose data. There is no need in trying to optimize the parsing with fastjson
and byte slice tricks, since OpenTelemetry protocol is really slooow because of over-engineering.
It is better to write clear code for better maintanability in the future.
- Move Firehose parser from /lib/protoparser/firehose to lib/protoparser/opentelemetry/firehose,
since it is used only by opentelemetry parser.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5893
This solves two issues:
1. The vm_backups_uploaded_bytes_total metric will grow more smoothly
2. This prevents from int overflow at metrics.Counter.Add() when uploading files bigger than 2GiB
This should simplify code maintenance by gradually converting to atomic.* types instead of calling atomic.* functions
on int and bool types.
See ea9e2b19a5
The issue has been introduced in bace9a2501
The improper fix was in the d4c0615dcd ,
since it fixed the issue just by an accident, because Go comiler aligned the rawRowsShards field
by 4-byte boundary inside partition struct.
The proper fix is to use atomic.Int64 field - this guarantees that the access to this field
won't result in unaligned 64-bit atomic operation. See https://github.com/golang/go/issues/50860
and https://github.com/golang/go/issues/19057
It has been appeared that there are VictoriaMetrics users, who rely on the fact that
VictoriaMetrics components were closing incoming connections to -httpListenAddr every 2 minutes
by default. So let's return back this value by default in order to fix the breaking change
made at d8c1db7953 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1961891450 .
Previously the (date, metricID) entries for dates older than the last 2 days were removed.
This could lead to slow check for the (date, metricID) entry in the indexdb during ingesting historical data (aka backfilling).
The issue has been introduced in 431aa16c8d
This commit returns back limits for these endpoints, which have been removed at 5d66ee88bd ,
since it has been appeared that missing limits result in high CPU usage, while the introduced concurrency limiter
results in failed lightweight requests to these endpoints because of timeout when heavyweight requests are executed.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
Do not convert shard items to part when a shard becomes full. Instead, collect multiple
full shards and then convert them to a searchable part at once. This reduces
the number of searchable parts, which, in turn, should increase query performance,
since queries need to scan smaller number of parts.
* app/vmselect: adds milliseconds to the csv export response for rfc3339
* milliseconds is a standard prescion for VictoriaMetrics query request responses
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5837
* app/victoria-metrics: adds tests for csv export/import
follow-up after 3541a8d0cf96dd4f8563624c4aab6816615d0756
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously the interval between item addition and its conversion to searchable in-memory part
could vary significantly because of too coarse per-second precision. Switch from fasttime.UnixTimestamp()
to time.Now().UnixMilli() for millisecond precision. It is OK to use time.Now() for tracking
the time when buffered items must be converted to searchable in-memory parts, since time.Now()
calls aren't located in hot paths.
Increase the flush interval for converting buffered samples to searchable in-memory parts
from one second to two seconds. This should reduce the number of blocks, which are needed
to be processed during high-frequency alerting queries. This, in turn, should reduce CPU usage.
While at it, hardcode the maximum size of rawRows shard to 8Mb, since this size gives the optimal
data ingestion pefromance according to load tests. This reduces memory usage and CPU usage on systems
with big amounts of RAM under high data ingestion rate.
The pooled rawRowsBlock objects occupies big amounts of memory between flushes,
and the flushes are relatively rare. So it is better to don't use the pool
and to allocate rawRow blocks on demand. This should reduce the average
memory usage between flushes.
The buffer can be quite big under high ingestion rate (e.g. more than 100MB).
This leads to increased memory usage between buffer flushes.
So it is better to re-create the buffer on every flush in order to reduce memory usage
between buffer flushes.
* [lib/promutils, lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)
* fixed tests
* fixed test
* Revert "fixed test"
This reverts commit 8a29764806.
* Revert "fixed tests"
This reverts commit 9ce13d1042.
* Revert "[lib/promutils, lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)"
This reverts commit a7a04bd4
* [lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Consistently return the first `limit` log entries if the total size of found log entries doesn't exceed 1Mb.
See app/vlselect/logsql/sort_writer.go . Previously random log entries could be returned with each request.
- Document the change at docs/VictoriaLogs/CHANGELOG.md
- Document the `limit` query arg at docs/VictoriaLogs/querying/README.md
- Make the change less intrusive.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5674
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5778
Instead, log a sample of these long items once per 5 seconds into error log,
so users could notice and fix the issue with too long labels or too many labels.
Previously this panic could occur in production when ingesting samples with too long labels.
The 3c246cdf00 added an optimization where the previous metaindexRow
could be saved to disk when the current block header couldn't be added indexBlock because the resulting
indexBlock size became too big. This could result in an empty metaindexRow.firstItem for the next metaindexRow.
This allows removing importing unneeded command-line flags into binaries, which import lib/storage,
which, in turn, was importing lib/snapshot in order to use Time, Validate and NewName functions.
This is a follow-up for 83e55456e2
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5738
Closing client connections every 2 minutes doesn't help load balancing -
this just leads to "jumpy" connections between multiple backend servers,
e.g. the load isn't spread evenly among backend servers, and instead jumps
between the servers every 2 minutes.
It is still possible periodically closing client connections by specifying non-zero -http.connTimeout command-line flag.
This should help with https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1636997037
This is a follow-up for d387da142e
There is no sense in storing commonPrefix for blockHeader containing only a single item,
since this only increases blockHeader size without any benefits.
This panic could occur when samples with too long label values are ingested into VictoriaMetrics.
This could result in too long fistItem and commonPrefix values at blockHeader (up to 64kb each).
This may inflate the maximum index block size by 4 * maxIndexBlockSize.
For example, -fooDuration=',10s,' is now supported - it sets three command-line flag values:
- the first and the last one are set to the default value for `-fooDuration`
- the second one is set to 10s
This should significantly reduce the number of open ReaderAt files
on VictoriaMetrics and VictoriaLogs startup.
The open files can be tracked via vm_fs_readers metric
GOGC can be already set via environment variable. There is no need in adding
new approaches for setting the GOGC (such as command-line flag), since they complicate operations.
Remove temporary file before closing it in order to signal the OS that it shouldn't
store the file contents from page cache to disk when the file is closed.
Gracefully handle the case when the file cannot be removed before being closed -
in this case remove the file after closing it. This allows working on Windows.
Also remove superflouos opening of temporary file for reading - re-use already opened file handle for writing.
This is a follow-up for 9b1e002287
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4020
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
