Co-authored-by: Andrew Chubatiuk <andrew.chubatiuk@motional.com>
Co-authored-by: Nikolay <https://github.com/f41gh7>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Add Try* prefix to functions, which return bool result in order to improve readability and reduce the probability of missing check
for the result returned from these functions.
- Call the adjustSampleValues() only once on input samples. Previously it was called on every attempt to flush data to peristent queue.
- Properly restore the initial state of WriteRequest passed to tryPushWriteRequest() before returning from this function
after unsuccessful push to persistent queue. Previously a part of WriteRequest samples may be lost in such case.
- Add -remoteWrite.dropSamplesOnOverload command-line flag, which can be used for dropping incoming samples instead
of returning 429 Too Many Requests error to the client when -remoteWrite.disableOnDiskQueue is set and the remote storage
cannot keep up with the data ingestion rate.
- Add vmagent_remotewrite_samples_dropped_total metric, which counts the number of dropped samples.
- Add vmagent_remotewrite_push_failures_total metric, which counts the number of unsuccessful attempts to push
data to persistent queue when -remoteWrite.disableOnDiskQueue is set.
- Remove vmagent_remotewrite_aggregation_metrics_dropped_total and vm_promscrape_push_samples_dropped_total metrics,
because they are replaced with vmagent_remotewrite_samples_dropped_total metric.
- Update 'Disabling on-disk persistence' docs at docs/vmagent.md
- Update stale comments in the code
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5088
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
* app/vmagent: allow to disabled on-disk queue
Previously, it wasn't possible to build data processing pipeline with a
chain of vmagents. In case when remoteWrite for the last vmagent in the
chain wasn't accessible, it persisted data only when it has enough disk
capacity. If disk queue is full, it started to silently drop ingested
metrics.
New flags allows to disable on-disk persistent and immediatly return an
error if remoteWrite is not accessible anymore. It blocks any writes and
notify client, that data ingestion isn't possible.
Main use case for this feature - use external queue such as kafka for
data persistence.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2110
* adds test, updates readme
* apply review suggestions
* update docs for vmagent
* makes linter happy
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This is a follow-up for f60c08a7bd
Changes:
- Make sure all the urls related to NewRelic protocol start from /newrelic . Previously some urls were started from /api/v1/newrelic
- Remove /api/v1 part from NewRelic urls, since it has no sense
- Remove automatic transformation from CamelCase to snake_case for NewRelic labels and metric names,
since it may complicate the transition from NewRelic to VictoriaMetrics. Preserve all the metric names and label names,
so users could query metrics and labels by the same names which are used in NewRelic.
The automatic transformation from CamelCase to snake_case can be added later as a special action for relabeling rules if needed.
- Properly update per-tenant data ingestion stats at app/vmagent/newrelic/request_handler.go . Previously it was always zero.
- Fix NewRelic urls in vmagent when multitenant data ingestion is enabled. Previously they were mistakenly started from `/`.
- Document NewRelic data ingestion url at docs/Cluster-VictoriaMetrics.md
- Remove superflouos memory allocations at lib/protoparser/newrelic
- Improve tests at lib/protoparser/newrelic/*
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3520
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4712
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
{vmagent/remotewrite,vminsert/common}: fix dropInput and keepInput flags inconsistency
Sync behavior for dropInput and keepInput flags between single-node and vmagent.
Fix vmagent not respecting dropInput flag and reverse logic for keepInput.
* Revert "vmalert: unittest support stale datapoint (#4696)"
This reverts commit 0b44df7ec8.
* Revert "docs: specify min version and limitations for vmalert's unit tests"
This reverts commit a24541bd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: init unit test (#4596)"
This reverts commit da60a68d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: mention unittest revert in changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
* {lib/streamaggr,vmagent/remotewrite}: breaking change for keepInput flag
Changes default behaviour of keepInput flag to write series which did not match any aggregators to the remote write.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This eliminates the need in .(*T) casting for results obtained from Load()
Leave atomic.Value for map, since atomic.Pointer[map[...]...] makes double pointer to map,
because map is already a pointer type.
Without reset, labels duplicates could have been added during stream aggregation.
Since `ctx.Labels` is reused during processing of many series, each series will
add its labels to the context. Even if the same labels were already addeded on prev
iteration. Now, we reset `ctx.Labels` on each iteration to contain so labels from
different series didn't interfere.
This could have cause exceeding of the limit on number of labels per pushed time series.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4277
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
`lib/protoparser/prometheus` is used by various applications,
such as `app/vmalert`. The recent change to the
`lib/protoparser/prometheus` package introduced a new dependency
of `lib/writeconcurrencylimiter` which exposes some metrics.
Because of the dependency, now all applications which have this
dependency also expose these metrics.
Creating a new `lib/protoparser/prometheus/stream` package helps
to remove these metrics from apps which use `lib/protoparser/prometheus`
as dependency.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3761
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Call httpserver.GetQuotedRemoteAddr() and httpserver.GetRequestURI() only when the error occurs.
This saves CPU time on fast path when there are no parsing errors.
- Create a helper function - httpserver.LogError() - for logging the error with the request uri and remote addr context.
* {lib/server, app/}: use `httpAuth.*` flag as fallback for `*AuthKey` if it is not set
* lib/ingestserver/opentsdbhttp: fix opentdb HTTP handler not respecting `httpAuth.*` flags
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
dd-agent v5 can issue some requests with trailing slashes.
(e.g.
526559be73/ddagent.py (L303))
Trim trailing slashes for request on /datadog/ paths to accomodate for
that.
Co-authored-by: Pierre Rossi <pierre.rossi@schibsted.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Remove unused js bloatware from /targets page. This strips down binary size by more than 100Kb
- Add /service-discovery page for API compatibility with Prometheus
- Properly load bootstrap.min.css from /prometheus/targets
- Serve static contents for /targets page from app/vminsert instead of app/vmselect, because /targets page is served from there
* lib/protoparser: changes ParseStream for native format
uses reader instead of http.Request
updates app/vmagent and app/vmagent method usage
* app/vmctl: add verify-block subcommand
it allows to check exported from VictoriaMetrics data block in native format
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2362
Update app/vmctl/README.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* new feature: relabel logging
Use scrape_configs[x].relabel_debug = true to log metric names inkl.
labels before and after relabeling. After relabeling related metrics
get dropped, i.e. not submitted to servers.
* vminsert wants relabel logging, too.
This option can be useful when samples for the same time series are ingested with distinct order of labels.
For example, metric{k1="v1",k2="v2"} and metric{k2="v2",k1="v1"}.
* adds extra_label to all import apis,
changes priority for extra_label - now it has priority over original labels
* Update README.md
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
* Update README.md
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
* adds extra labels to vmagent import api
changes order for adding labels, now its added after user values
* adds tests for extra_label
* import fix
Co-authored-by: Aliaksandr Valialkin <valyala@gmail.com>
