This commit makes vmauth respect the routing config for unauthorized
requests for requests that despite having Authorization header failed to
authorize successfully.
It covers the following use-cases:
- vmauth is used at load-balanacer and must forward requests as is. There is no any authorization configs.
- vmauth has authorization config, but it must forward requests with invalid credential tokens to some other backend.
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7543
---------
Signed-off-by: Andrii <andriibeee@gmail.com>
The following user-level options must be unconditionally inherited by url_map, since this is what most users expect:
- retry_status_codes
- load_balancing_policy
- drop_src_path_prefix_parts
- discover_backend_ips
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7519
Previously, vmauth could have pick `buMin` as least loaded backend
without checking its status. In result, vmauth could have respond to the
user with an error even if there were healthy backends. That could
happen if healthy backends already had non-zero amount of concurrent
requests executing at the moment of least-loaded backend choosing logic.
Steps to reproduce:
1. Setup vmauth with two backends: healthy and non-healthy
2. Execute a bunch of concurrent requests against vmauth (i.e. Grafana
dash reload)
3. Observe that some requests will fail with message that all backends
are unavailable
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
---
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously it incorrectly applied xFilesFactor, if it's value equal to 0.
This commit properly handles this case and returns result according to
the graphite documentation:
`xFilesFactor follows the same semantics as in Whisper storage schemas. Setting it to 0 (the default) means that only a single value in the series needs to be non-null for it to be considered non-empty, setting it to 1 means that all values in the series must be non-null. A setting of 0.5 means that at least half the values in the series must be non-null.`
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Evgeniy Negriy <einegriy@avito.ru>
### Describe Your Changes
I don't like this solution, but it works. Other possible solutions
described in an issue
fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7068
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7301
When querying with condition like `WHERE a=1` (looking for series A),
InfluxDB can return data with the tag `a=1` (series A) and data with the
tag `a=1,b=1` (series B).
However, series B is will be queried later and it's data should not be
combined into series A's data.
This PR filter those series that are not identical to the original query
condition.
For table `example`:
```
// time host region value
// ---- ---- ------ -----
// 2024-10-25T02:12:13.469720983Z serverA us_west 0.64
// 2024-10-25T02:12:21.832755213Z serverA us_west 0.75
// 2024-10-25T02:12:32.351876479Z serverA 0.88
// 2024-10-25T02:12:37.766320484Z serverA 0.95
```
The query for series A (`example_value{host="serverA"}`) and result will
be:
```SQL
SELECT * FROM example WHERE host = "serverA"
```
```json
{
"results": [{
"statement_id": 0,
"series": [{
"name": "cpu",
"columns": ["time", "host", "region", "value"],
"values": [
["2024-10-25T02:12:13.469720983Z", "serverA", "us_west", 0.64],
["2024-10-25T02:12:21.832755213Z", "serverA", "us_west", 0.75],
["2024-10-25T02:12:32.351876479Z", "serverA", null, 0.88],
["2024-10-25T02:12:37.766320484Z", "serverA", null, 0.95]
]
}]
}]
}
```
We need to abandon `values[0]` and `values[1]` because the value of
**unwanted** column `region` is not null.
As for series B (`example_value{host="serverA", region="us_west"}`), no
change needed since the query filter out unwanted rows already.
### Note
This is a draft PR for verifying the fix.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Add puppetdb sd to changelog of `v1.106.0` version.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
Christmas is early and you get the first present in the shape of
spelling fixes.
Sorry for the big amount :)
### Checklist
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
- remove reference to sparse cache as it was reverted in 9f9cc24e4c
- add reference to 1.102.6 and 1.97.11 LTS releases
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Previously vmgateway returned error for the requests with multitenant
tenant.
This commit allows to rate limit multitenant requests and apply global
rate limit for it.
Currently it supports only queries for rate limiting.
Related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7201
This commit also addresses gateway start-up crash if datasource.url is not accessible.
Previously vmgateway could crash at start-up with enabled rate limiting if datasource for metrics
was not avaiable for any reason. It seems, that crash is expected. But in fact it's not. For instance, datasource could be in restart phase.
Replaces crash with log message error. It increased availability of vmgateway component.
Signed-off-by: f41gh7 <nik@victoriametrics.com>
This commit adds `metric_relabel_configs` and `relabel_configs` fields
into the `global` section of scrape configuration file.
New fields are used as global relabeling rules for the scrape targets.
These relabel configs are prepended to the target relabel configs.
This feature is useful to:
* apply global rules to __meta labels from service discovery targets.
* drop noisy labels during scrapping.
* mutate labels without affecting metrics ingested via any of push
protocols.
Related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6966
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Reopening PR #7373 from a branch in VictoriaMetrics repo in order to
enable edits and rebase.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
It is possible for in-memory part to be empty if ingested samples are
removed by retention filters. In this case, data will not be discarded
due to retention before creating in memory part. After in-memory parts
merge samples will be removed resulting in creating completely empty
part at destination.
This commit checks for resulting part and skips it, if it's empty.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
### Describe Your Changes
Fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7334
available disk space should be
```
(vm_free_disk_space_bytes{job=~...} - vm_free_disk_space_limit_bytes{job=~...})
```
instead of
```
vm_free_disk_space_bytes{job=~...}
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This commit adds Kubernetes Native Sidecar support.
It's the special type of init containers, that have restartPolicy == "Always" and continue to run after container initialization.
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7287
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7182
- add a separate index cache for searches which might read through large
amounts of random entries. Primary use-case for this is retention and
downsampling filters, when applying filters background merge needs to
fetch large amount of random entries which pollutes an index cache.
Using different caches allows to reduce effect on memory usage and cache
efficiency of the main cache while still having high cache hit rate. A
separate cache size is 5% of allowed memory.
- reduce size of indexdb/dataBlocks cache in order to free memory for
new sparse cache. Reduced size by 5% and moved this to a separate cache.
- add a separate metricName search which does not cache metric names -
this is needed in order to allow disabling metric name caching when
applying downsampling/retention filters. Applying filters during
background merge accesses random entries, this fills up cache and does
not provide an actual improvement due to random access nature.
Merge performance and memory usage stats before and after the change:
- before
- after
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7309
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Auto-adjust `-remoteWrite.concurrency` cmd-line flags with the number of
available CPU cores in the same way as vmagent does. With this change
the default behavior of vmalert in high-loaded installation should
become more resilient. This change also reduces
`-remoteWrite.flushInterval` from `5s` to `2s` to provide better data
freshness.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This commit properly adds `group_name` and `file` fields for recording rules web api response at `/api/v1/rules`.
Previously these fields were blank.
Related issue https://github.com/victoriaMetrics/victoriaMetrics/issues/7297
Signed-off-by: Antoine Deschênes <antoine.deschenes@linux.com>
### Describe Your Changes
Add support for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6930
Calculate `-search.maxUniqueTimeseries` by
`-search.maxConcurrentRequests` and remaining memory if it's **not set**
or **less equal than 0**.
The remaining memory is affected by `-memory.allowedPercent`,
`-memory.allowedBytes` and cgroup memory limit.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 85f60237e2)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Group
[sleeps](daa7183749/app/vmalert/rule/group.go (L320))
random duration before start the evaluation, and during the sleep,
`g.updateCh <- new` will be blocked since there is no `<-g.updateCh`
waiting.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
After adding multitenant query feature at v1.104.0, searchQuery wasn't
properly unmarshalled at bottom vmselect in multi-level cluster setup.
It resulted into empty query responses.
This commit adds fallback to Unmarshal method of SearchQuery to fill
TenantTokens. It allows to properly execute search requests
at vmselect side.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7270
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Previously unit `m` is not correctly supported.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
If a dict flag has only one value without a prefix it is supposed to
replace default value.
Previously, when flag was set to `-flag=2` and the default value in
`NewDictInt` was set to 1 the resulting value for any `flag.Get()` call
would be 1 which is not expected.
This commit updates default value for the flag in case there is only one
entry for flag and the entry is a number without a key.
This affects cluster version and specifically `replicationFactor` flag
usage with vmstorage [node
groups](https://docs.victoriametrics.com/cluster-victoriametrics/#vmstorage-groups-at-vmselect).
Previously, the following configuration would effectively be ignored:
```
/path/to/vmselect \
-replicationFactor=2 \
-storageNode=g1/host1,g1/host2,g1/host3 \
-storageNode=g2/host4,g2/host5,g2/host6 \
-storageNode=g3/host7,g3/host8,g3/host9
```
Changes from this PR will force default value for `replicationFactor`
flag to be set to `2` which is expected as the result of this
configuration.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6970.
This reduces the hard limit on duration for completing the test when
users run vmalert-tool on slow hosts.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously it was incorrectly used append for pre-allocated slice of labels.
This commit fixes slice append by allocating zero length slice with needed capacity.
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
### Describe Your Changes
Fix `Alert` component to prevent it from overflowing the screen when
displaying long messages.
Related issue: #7207
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
- Added functionality to cancel running queries on the Explore Logs and
Query pages.
- The loader was changed from a spinner to a top bar within the block.
This still indicates loading, but solves the issue of the spinner
"flickering," especially during graph dragging.
Related issue: #7097https://github.com/user-attachments/assets/98e59aeb-905b-4b9d-bbb2-688223b22a82
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Some IDPs encode scope as a slice of strings. Handle this gracefully by encoding a slice back to string.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit f61d8c3ebb)
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
added opentelemetry exponential histograms support. Such histograms are automatically converted into
VictoriaMetrics histogram with `vmrange` buckets.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
