VictoriaMetrics/vendor/github.com/klauspost/compress/flate/level3.go
Aliaksandr Valialkin 2084921e64 all: use github.com/klauspost/compress/gzip instead of compress/gzip
`github.com/klauspost/compress/gzip` is more optimized than `compress/gzip`.
This gives better gzip compression and decompression speeds.
2020-01-17 23:59:17 +02:00

225 lines
5.6 KiB
Go

package flate
// fastEncL3
type fastEncL3 struct {
fastGen
table [tableSize]tableEntryPrev
}
// Encode uses a similar algorithm to level 2, will check up to two candidates.
func (e *fastEncL3) Encode(dst *tokens, src []byte) {
const (
inputMargin = 8 - 1
minNonLiteralBlockSize = 1 + 1 + inputMargin
)
// Protect against e.cur wraparound.
for e.cur >= bufferReset {
if len(e.hist) == 0 {
for i := range e.table[:] {
e.table[i] = tableEntryPrev{}
}
e.cur = maxMatchOffset
break
}
// Shift down everything in the table that isn't already too far away.
minOff := e.cur + int32(len(e.hist)) - maxMatchOffset
for i := range e.table[:] {
v := e.table[i]
if v.Cur.offset <= minOff {
v.Cur.offset = 0
} else {
v.Cur.offset = v.Cur.offset - e.cur + maxMatchOffset
}
if v.Prev.offset <= minOff {
v.Prev.offset = 0
} else {
v.Prev.offset = v.Prev.offset - e.cur + maxMatchOffset
}
e.table[i] = v
}
e.cur = maxMatchOffset
}
s := e.addBlock(src)
// Skip if too small.
if len(src) < minNonLiteralBlockSize {
// We do not fill the token table.
// This will be picked up by caller.
dst.n = uint16(len(src))
return
}
// Override src
src = e.hist
nextEmit := s
// sLimit is when to stop looking for offset/length copies. The inputMargin
// lets us use a fast path for emitLiteral in the main loop, while we are
// looking for copies.
sLimit := int32(len(src) - inputMargin)
// nextEmit is where in src the next emitLiteral should start from.
cv := load3232(src, s)
for {
const skipLog = 6
nextS := s
var candidate tableEntry
for {
nextHash := hash(cv)
s = nextS
nextS = s + 1 + (s-nextEmit)>>skipLog
if nextS > sLimit {
goto emitRemainder
}
candidates := e.table[nextHash]
now := load3232(src, nextS)
e.table[nextHash] = tableEntryPrev{Prev: candidates.Cur, Cur: tableEntry{offset: s + e.cur, val: cv}}
// Check both candidates
candidate = candidates.Cur
offset := s - (candidate.offset - e.cur)
if cv == candidate.val {
if offset > maxMatchOffset {
cv = now
// Previous will also be invalid, we have nothing.
continue
}
o2 := s - (candidates.Prev.offset - e.cur)
if cv != candidates.Prev.val || o2 > maxMatchOffset {
break
}
// Both match and are valid, pick longest.
l1, l2 := matchLen(src[s+4:], src[s-offset+4:]), matchLen(src[s+4:], src[s-o2+4:])
if l2 > l1 {
candidate = candidates.Prev
}
break
} else {
// We only check if value mismatches.
// Offset will always be invalid in other cases.
candidate = candidates.Prev
if cv == candidate.val {
offset := s - (candidate.offset - e.cur)
if offset <= maxMatchOffset {
break
}
}
}
cv = now
}
// Call emitCopy, and then see if another emitCopy could be our next
// move. Repeat until we find no match for the input immediately after
// what was consumed by the last emitCopy call.
//
// If we exit this loop normally then we need to call emitLiteral next,
// though we don't yet know how big the literal will be. We handle that
// by proceeding to the next iteration of the main loop. We also can
// exit this loop via goto if we get close to exhausting the input.
for {
// Invariant: we have a 4-byte match at s, and no need to emit any
// literal bytes prior to s.
// Extend the 4-byte match as long as possible.
//
t := candidate.offset - e.cur
l := e.matchlenLong(s+4, t+4, src) + 4
// Extend backwards
for t > 0 && s > nextEmit && src[t-1] == src[s-1] {
s--
t--
l++
}
if nextEmit < s {
emitLiteral(dst, src[nextEmit:s])
}
dst.AddMatchLong(l, uint32(s-t-baseMatchOffset))
s += l
nextEmit = s
if nextS >= s {
s = nextS + 1
}
if s >= sLimit {
t += l
// Index first pair after match end.
if int(t+4) < len(src) && t > 0 {
cv := load3232(src, t)
nextHash := hash(cv)
e.table[nextHash] = tableEntryPrev{
Prev: e.table[nextHash].Cur,
Cur: tableEntry{offset: e.cur + t, val: cv},
}
}
goto emitRemainder
}
// We could immediately start working at s now, but to improve
// compression we first update the hash table at s-3 to s.
x := load6432(src, s-3)
prevHash := hash(uint32(x))
e.table[prevHash] = tableEntryPrev{
Prev: e.table[prevHash].Cur,
Cur: tableEntry{offset: e.cur + s - 3, val: uint32(x)},
}
x >>= 8
prevHash = hash(uint32(x))
e.table[prevHash] = tableEntryPrev{
Prev: e.table[prevHash].Cur,
Cur: tableEntry{offset: e.cur + s - 2, val: uint32(x)},
}
x >>= 8
prevHash = hash(uint32(x))
e.table[prevHash] = tableEntryPrev{
Prev: e.table[prevHash].Cur,
Cur: tableEntry{offset: e.cur + s - 1, val: uint32(x)},
}
x >>= 8
currHash := hash(uint32(x))
candidates := e.table[currHash]
cv = uint32(x)
e.table[currHash] = tableEntryPrev{
Prev: candidates.Cur,
Cur: tableEntry{offset: s + e.cur, val: cv},
}
// Check both candidates
candidate = candidates.Cur
if cv == candidate.val {
offset := s - (candidate.offset - e.cur)
if offset <= maxMatchOffset {
continue
}
} else {
// We only check if value mismatches.
// Offset will always be invalid in other cases.
candidate = candidates.Prev
if cv == candidate.val {
offset := s - (candidate.offset - e.cur)
if offset <= maxMatchOffset {
continue
}
}
}
cv = uint32(x >> 8)
s++
break
}
}
emitRemainder:
if int(nextEmit) < len(src) {
// If nothing was added, don't encode literals.
if dst.n == 0 {
return
}
emitLiteral(dst, src[nextEmit:])
}
}