mirror of
https://github.com/gonzho000/chpc.git
synced 2025-01-14 20:44:04 +00:00
Add files via upload
This commit is contained in:
gonzho000
GitHub
parent
26f39ed410
commit
956f750a32
1 changed files with 286 additions and 66 deletions
|
|
@ -21,14 +21,15 @@
|
|||
|
||||
|
||||
//-----------------------USER OPTIONS-----------------------
|
||||
#define BOARD_TYPE_G //Type "G"
|
||||
#define BOARD_TYPE_G //Type "G", PCB from github.com/gonzho000/chpc/
|
||||
//#define BOARD_TYPE_F //Type "F"
|
||||
//#define BOARD_TYPE_G9 //Type "G9" or "G-MAX", current testing
|
||||
|
||||
//#define DISPLAY_096 1 //1st tests, support WILL BE DROPPED OUT SOON! small OLEDs support
|
||||
#define DISPLAY_1602 2 //if only 1st character appears: patch 1602 library "inline size_t LiquidCrystal_I2C::write(uint8_t value)" "return 1" instead of "return 0"
|
||||
//#define DISPLAY_NONE -1
|
||||
|
||||
#define INPUTS_AS_BUTTONS 1 //pulldown resistors required!
|
||||
#define INPUTS_AS_BUTTONS 1 //pulldown resistors required
|
||||
|
||||
//#define RS485_PYTHON 1
|
||||
#define RS485_HUMAN 2
|
||||
|
|
@ -43,15 +44,15 @@
|
|||
|
||||
//-----------------------TEMPERATURES-----------------------
|
||||
#define T_SETPOINT_MAX 45.0; //defines max temperature that ordinary user can set
|
||||
#define T_HOTCIRCLE_DELTA_MIN 2.0; //useful for "water heater vith intermediate heat exchanger" scheme, Target == sensor in water, hot side CP will be switched on if "target - hot_out > this option"
|
||||
#define T_SUMP_MIN 9.0; //will not start if T lower
|
||||
#define T_SUMP_MAX 110.0; //will stop if T higher
|
||||
#define T_HOTCIRCLE_DELTA_MIN 2.0; //useful for "water heater vith intermediate heat exchanger" scheme, Target == sensor in water, hot side CP will be switched on if "target - hot_out > T_HOTCIRCLE_DELTA_MIN"
|
||||
#define T_SUMP_MIN 9.0; //HP will not start if T lower
|
||||
#define T_SUMP_MAX 110.0; //HP will stop if T higher
|
||||
#define T_SUMP_HEAT_THRESHOLD 16.0; //sump heater will be powered on if T lower
|
||||
#define T_BEFORE_CONDENSER_MAX 108.0; //discharge MAX, system stops if discharge higher
|
||||
#define T_AFTER_EVAPORATOR_MIN -7.0; //suction MIN, stop if lower, anti-freeze and anti-liquid at suction protection
|
||||
#define T_AFTER_EVAPORATOR_MIN -7.0; //suction MIN, HP stops if lower, anti-freeze and anti-liquid at suction protection
|
||||
#define T_COLD_MIN -8.0; //cold loop anti-freeze: stop if inlet or outlet temperature lower
|
||||
#define T_HOTOUT_MAX 50.0; //hot loop: stop if outlet temperature higher than this
|
||||
#define T_WORKINGOK_SUMP_MIN 30.0; //used in compressor alive checker: need to be not very high to normal start after deep freeze
|
||||
#define T_WORKINGOK_SUMP_MIN 30.0; //compressor MIN temperature, HP stops if it lower after 5 minutes of pumping, need to be not very high to normal start after deep freeze
|
||||
|
||||
//-----------------------TUNING OPTIONS -----------------------
|
||||
#define MAX_WATTS 1170.0 //user for power protection
|
||||
|
|
@ -74,17 +75,18 @@
|
|||
|
||||
#define EEV_STOP_HOLD 500 //0.1..1sec for Sanhua
|
||||
#define EEV_CLOSE_ADD_PULSES 8 //read below, close algo
|
||||
#define EEV_OPEN_AFTER_CLOSE 47 //0 - close to zero position, than close on EEV_CLOSE_ADD_PULSES
|
||||
#define EEV_OPEN_AFTER_CLOSE 47 //0 - close to zero position, than close on EEV_CLOSE_ADD_PULSES (close insurance, read EEV manuals for this value)
|
||||
//N - close to zero position, than close on EEV_CLOSE_ADD_PULSES, than open on EEV_OPEN_AFTER_CLOSE pulses
|
||||
#define EEV_MINWORKPOS 52 //position will be not less during normal work
|
||||
#define EEV_PRECISE_START 8.6 //T difference, threshold: make slower pulses if less
|
||||
#define EEV_EMERG_DIFF 2.5 //if dangerous condition: diff =< (target_diff - EEV_EMERG_DIFF) occured, ex: target diff 5.0, emerg. diff 2.0, if calculated nowtime diff <= 3.0 then EEV will be closed
|
||||
//i.e. it is "waiting position" while HP not working
|
||||
#define EEV_MINWORKPOS 52 //position will be not less during normal work, set after compressor start
|
||||
#define EEV_PRECISE_START 8.6 //T difference, threshold: make slower pulses if (real_diff-target_diff) less than this value. Used for fine auto-tuning.
|
||||
#define EEV_EMERG_DIFF 2.5 //if dangerous condition: real_diff =< (target_diff - EEV_EMERG_DIFF) occured then EEV will be closed to min. work position //Ex: EEV_EMERG_DIFF = 2.0, target diff 5.0, if real_diff =< (5.0 - 2.0) than EEV will be closed
|
||||
#define EEV_HYSTERESIS 0.6 //must be less than EEV_PRECISE_START, ex: target difference = 4.0, hysteresis = 0.1, when difference in range 4.0..4.1 no EEV pulses will be done;
|
||||
#define EEV_CLOSEEVERY 86400000 //86400000: every 24 hours, done while HP is NOT working
|
||||
#define EEV_TARGET_TEMP_DIFF 4.0 //target difference between Before Evaporator and After Evaporator
|
||||
//#define EEV_DEBUG //used to debug during fine tuning, "RS485_HUMAN" only
|
||||
#define EEV_CLOSEEVERY 86400000 //86400000: EEV will be closed (calibrated) every 24 hours, done while HP is NOT working
|
||||
#define EEV_TARGET_TEMP_DIFF 4.0 //target difference between Before Evaporator and After Evaporator, the head of whole algo
|
||||
//#define EEV_DEBUG //debug, usefull during system fine tuning, "RS485_HUMAN" only
|
||||
|
||||
#define MAGIC 0x46 //change if u want to reinit T sensors
|
||||
#define MAGIC 0x55 //change if u want to reinit T sensors
|
||||
//-----------------------USER OPTIONS END -----------------------
|
||||
|
||||
//#define INPUTS_AS_INPUTS 2 //
|
||||
|
|
@ -129,13 +131,26 @@ v1.4, 02 Jun 2019:
|
|||
- EEV more asyncy
|
||||
- T options to header
|
||||
|
||||
v1.5, 01 Jul 2019:
|
||||
- prototyping 9
|
||||
|
||||
v1.6, 30 Apr 2021:
|
||||
- sensors init issue fix
|
||||
|
||||
//TODO:
|
||||
- wclose and fclose to EEV
|
||||
- liquid ref. protection: start cold circle and sump heater if tsump =< tco/tci+1
|
||||
- 0.0 to -127 fix: only 2 attempts than pass 0.0
|
||||
- poss. DoS: infinite read to nowhere, fix it, set finite counter (ex: 200)
|
||||
- Dev and Host ID to header
|
||||
- add speaker and err code for ""ERR: no Tae or Tbe for EEV!""
|
||||
- min_user_t/max_user_t to header
|
||||
- rs485_modbus
|
||||
- full relays halification
|
||||
? wclose and fclose to EEV
|
||||
- liquid ref. protection: start cold circle and sump heater if tsump =< tco/tci+1, add option to header
|
||||
- periodical start of hot side circle
|
||||
- valve_4way
|
||||
- emergency jumper support
|
||||
- inputs support
|
||||
- ? emergency jumper support
|
||||
- ? rewite re-init proc from MAGIC to emergency jumper removal at board start
|
||||
- ? EEV target to EEPROM
|
||||
- ? list T and other things on screen with buttons
|
||||
|
|
@ -252,7 +267,7 @@ wattage1
|
|||
|
||||
*/
|
||||
|
||||
String fw_version = "1.4";
|
||||
String fw_version = "1.6";
|
||||
|
||||
#ifdef DISPLAY_096
|
||||
#define DISPLAY DISPLAY_096
|
||||
|
|
@ -351,6 +366,32 @@ String fw_version = "1.4";
|
|||
#endif
|
||||
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_G9
|
||||
String hw_version = "Type G9 v1.x";
|
||||
#define RELAY_4WAY_VALVE 8
|
||||
#define RELAY_SUMP_HEATER 7
|
||||
|
||||
#define LATCH_595 10
|
||||
#define CLK_595 9
|
||||
#define DATA_595 11
|
||||
#define OE_595 A1
|
||||
/*
|
||||
595.0: relay 10(not used)
|
||||
595.1: relay 8
|
||||
595.2: relay 9
|
||||
595.3: relay 5 RELAY_HEATPUMP
|
||||
595.4: relay 4 RELAY_COLDSIDE_CIRCLE
|
||||
595.5: relay 3 RELAY_HOTSIDE_CIRCLE
|
||||
595.6: relay 6
|
||||
595.7: relay 7
|
||||
*/
|
||||
#ifdef EEV_SUPPORT
|
||||
#define EEV_1 2
|
||||
#define EEV_2 4
|
||||
#define EEV_3 3
|
||||
#define EEV_4 5
|
||||
#endif
|
||||
#endif
|
||||
//---------------------------memory debug
|
||||
#ifdef __arm__
|
||||
// should use uinstd.h to define sbrk but Due causes a conflict
|
||||
|
|
@ -464,6 +505,12 @@ bool heatpump_state = 0;
|
|||
bool hotside_circle_state = 0;
|
||||
bool coldside_circle_state = 0;
|
||||
bool sump_heater_state = 0;
|
||||
bool valve4w_state = 0;
|
||||
|
||||
bool relay6_state = 0;
|
||||
bool relay7_state = 0;
|
||||
bool relay8_state = 0;
|
||||
bool relay9_state = 0;
|
||||
|
||||
const long poweron_pause = POWERON_PAUSE ; //default 5 mins
|
||||
const long mincycle_poweroff = MINCYCLE_POWEROFF; //default 5 mins
|
||||
|
|
@ -615,7 +662,7 @@ char CheckAddrExists(void) {
|
|||
return 0;
|
||||
|
||||
/*
|
||||
//incorrect way:
|
||||
//incorrect way: 0.06 % chance for 13 sensors to false positive, calculated for true random.
|
||||
for (i = 0; i < 8; i++) {
|
||||
if ( (dev_addr[i] != Tae.addr[i]) &&
|
||||
(dev_addr[i] != Tbe.addr[i]) &&
|
||||
|
|
@ -891,7 +938,7 @@ unsigned char FindAddr(String what, int required = 0) {
|
|||
}
|
||||
}
|
||||
while (1) {
|
||||
//PrintAddr(dev_addr);
|
||||
PrintAddr(dev_addr);
|
||||
delay(1000);
|
||||
if (s_allTsensors.getAddress(dev_addr, 0)) {
|
||||
PrintS_and_D("OK! Remove " + what);
|
||||
|
|
@ -901,7 +948,7 @@ unsigned char FindAddr(String what, int required = 0) {
|
|||
break;
|
||||
}
|
||||
}
|
||||
return i;
|
||||
return 1;
|
||||
}
|
||||
|
||||
double GetT (unsigned char *str) {
|
||||
|
|
@ -1000,41 +1047,49 @@ void halifise(void){
|
|||
digitalWrite(LATCH_595, 0);
|
||||
//7
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//6
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//5
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//4
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//3
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//2
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0); //4way valve here
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//1
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, sump_heater_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//0
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, hotside_circle_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
|
|
@ -1042,18 +1097,91 @@ void halifise(void){
|
|||
//
|
||||
digitalWrite(LATCH_595, 1);
|
||||
|
||||
|
||||
digitalWrite (RELAY_HEATPUMP, heatpump_state);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, coldside_circle_state);
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_G
|
||||
digitalWrite (RELAY_SUMP_HEATER, sump_heater_state);
|
||||
digitalWrite (RELAY_SUMP_HEATER, sump_heater_state);
|
||||
digitalWrite (RELAY_HOTSIDE_CIRCLE, hotside_circle_state);
|
||||
digitalWrite (RELAY_HEATPUMP, heatpump_state);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, coldside_circle_state);
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_G9
|
||||
//#define RELAY_4WAY_VALVE 8
|
||||
//#define RELAY_SUMP_HEATER 7
|
||||
/*
|
||||
595.0: relay 10(not used)
|
||||
595.1: relay 8 //use for 1st test of DAC
|
||||
595.2: relay 9 //use for 1st test of DAC
|
||||
595.3: relay 5 RELAY_HEATPUMP
|
||||
595.4: relay 4 RELAY_COLDSIDE_CIRCLE
|
||||
595.5: relay 3 RELAY_HOTSIDE_CIRCLE
|
||||
595.6: relay 6
|
||||
595.7: relay 7
|
||||
*/
|
||||
|
||||
digitalWrite(LATCH_595, 0);
|
||||
//7
|
||||
digitalWrite(CLK_595, 0);
|
||||
digitalWrite(DATA_595, relay7_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//6
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, relay6_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//5
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, hotside_circle_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//4
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, coldside_circle_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//3
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, heatpump_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//2
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, relay9_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//1
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, relay8_state);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
//0
|
||||
digitalWrite(CLK_595, 0);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(DATA_595, 0);
|
||||
digitalWrite(CLK_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(CLK_595, 0);
|
||||
//
|
||||
digitalWrite(LATCH_595, 1);
|
||||
__asm__ __volatile__ ("nop\n\t");
|
||||
digitalWrite(LATCH_595, 0);
|
||||
digitalWrite (RELAY_SUMP_HEATER, sump_heater_state);
|
||||
digitalWrite (RELAY_4WAY_VALVE, valve4w_state);
|
||||
#endif
|
||||
}
|
||||
|
||||
void eevise(void) {
|
||||
if ( ((( EEV_apulses < 0 ) && (EEV_fast == 1)) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_FCLOSE_MILLIS)) ) ||
|
||||
if ( ((( EEV_apulses < 0 ) && (EEV_fast == 1)) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_FCLOSE_MILLIS)) ) ||
|
||||
((( EEV_apulses < 0 ) && (EEV_fast == 0)) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_CLOSE_MILLIS) ) ) ||
|
||||
((( EEV_apulses > 0 ) && (EEV_cur_pos < EEV_MINWORKPOS )) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_WOPEN_MILLIS) ) ) ||
|
||||
((( EEV_apulses > 0 ) && (EEV_cur_pos < EEV_MINWORKPOS )) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_WOPEN_MILLIS) ) ) ||
|
||||
((( EEV_apulses > 0 ) && (EEV_fast == 1) && (EEV_cur_pos >= EEV_MINWORKPOS )) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_FOPEN_MILLIS) ) ) ||
|
||||
((( EEV_apulses > 0 ) && (EEV_fast == 0) && (EEV_cur_pos >= EEV_MINWORKPOS )) && ((unsigned long)(millis_now - millis_eev_last_step) > (EEV_PULSE_OPEN_MILLIS) ) ) ||
|
||||
(millis_eev_last_step == 0)
|
||||
|
|
@ -1100,31 +1228,53 @@ void eevise(void) {
|
|||
//--------------------------- functions END
|
||||
|
||||
void setup(void) {
|
||||
pinMode (RELAY_HEATPUMP, OUTPUT);
|
||||
pinMode (RELAY_COLDSIDE_CIRCLE, OUTPUT);
|
||||
digitalWrite (RELAY_HEATPUMP, LOW);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, LOW);
|
||||
|
||||
#ifdef BOARD_TYPE_G
|
||||
pinMode (RELAY_HEATPUMP, OUTPUT);
|
||||
pinMode (RELAY_COLDSIDE_CIRCLE, OUTPUT);
|
||||
digitalWrite (RELAY_HEATPUMP, LOW);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, LOW);
|
||||
//
|
||||
pinMode (RELAY_SUMP_HEATER, OUTPUT);
|
||||
pinMode (RELAY_HOTSIDE_CIRCLE, OUTPUT);
|
||||
digitalWrite (RELAY_SUMP_HEATER, LOW);
|
||||
digitalWrite (RELAY_HOTSIDE_CIRCLE, LOW);
|
||||
halifise();
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_F
|
||||
pinMode (RELAY_HEATPUMP, OUTPUT);
|
||||
pinMode (RELAY_COLDSIDE_CIRCLE, OUTPUT);
|
||||
digitalWrite (RELAY_HEATPUMP, LOW);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, LOW);
|
||||
//
|
||||
pinMode (LATCH_595, OUTPUT);
|
||||
pinMode (CLK_595, OUTPUT);
|
||||
pinMode (DATA_595, OUTPUT);
|
||||
digitalWrite (LATCH_595, LOW);
|
||||
digitalWrite (CLK_595, LOW);
|
||||
digitalWrite (DATA_595, LOW);
|
||||
halifise();
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_G9
|
||||
pinMode (LATCH_595, OUTPUT);
|
||||
pinMode (CLK_595, OUTPUT);
|
||||
pinMode (DATA_595, OUTPUT);
|
||||
pinMode (RELAY_SUMP_HEATER, OUTPUT);
|
||||
pinMode (RELAY_4WAY_VALVE, OUTPUT);
|
||||
pinMode (OE_595, OUTPUT);
|
||||
digitalWrite (LATCH_595, LOW);
|
||||
digitalWrite (CLK_595, LOW);
|
||||
digitalWrite (DATA_595, LOW);
|
||||
digitalWrite (RELAY_SUMP_HEATER, LOW);
|
||||
digitalWrite (RELAY_4WAY_VALVE, LOW);
|
||||
halifise();
|
||||
digitalWrite (OE_595, LOW);
|
||||
#endif
|
||||
|
||||
#ifdef WATCHDOG
|
||||
wdt_disable();
|
||||
delay(2000);
|
||||
#endif
|
||||
|
||||
InitS_and_D();
|
||||
pinMode(SerialTxControl, OUTPUT);
|
||||
digitalWrite(SerialTxControl, RS485Receive);
|
||||
|
|
@ -1152,6 +1302,84 @@ void setup(void) {
|
|||
s_allTsensors.begin();
|
||||
s_allTsensors.setWaitForConversion(false); //ASYNC mode, request before get, see Dallas library for details
|
||||
|
||||
|
||||
//----------------------------- self-tests !!!----------------------------- ----------------------------- -----------------------------
|
||||
/*
|
||||
digitalWrite(RELAY_HEATPUMP,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_HOTSIDE_CIRCLE,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_COLDSIDE_CIRCLE,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_SUMP_HEATER,HIGH);
|
||||
delay(2000);
|
||||
digitalWrite(RELAY_HEATPUMP,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_HOTSIDE_CIRCLE,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_COLDSIDE_CIRCLE,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_SUMP_HEATER,LOW);
|
||||
*/
|
||||
/*
|
||||
tone(speakerOut, 2250);
|
||||
delay (500); // like ups power on
|
||||
noTone(speakerOut);
|
||||
|
||||
|
||||
|
||||
while ( 1 == 1) {
|
||||
|
||||
heatpump_state = 1; halifise(); delay(1000);
|
||||
coldside_circle_state = 1; halifise(); delay(1000);
|
||||
hotside_circle_state = 1; halifise(); delay(1000);
|
||||
sump_heater_state = 1; halifise(); delay(1000);
|
||||
valve4w_state = 1; halifise(); delay(1000);
|
||||
#ifdef BOARD_TYPE_G9
|
||||
relay6_state = 1; halifise(); delay(1000);
|
||||
relay7_state = 1; halifise(); delay(1000);
|
||||
relay8_state = 1; halifise(); delay(1000);
|
||||
relay9_state = 1; halifise(); delay(1000);
|
||||
#endif
|
||||
break;
|
||||
|
||||
delay(3000);
|
||||
heatpump_state = 0; halifise(); delay(1000);
|
||||
coldside_circle_state = 0; halifise(); delay(1000);
|
||||
hotside_circle_state = 0; halifise(); delay(1000);
|
||||
sump_heater_state = 0; halifise(); delay(1000);
|
||||
valve4w_state = 0; halifise(); delay(1000);
|
||||
#ifdef BOARD_TYPE_G9
|
||||
relay6_state = 0; halifise(); delay(1000);
|
||||
relay7_state = 0; halifise(); delay(1000);
|
||||
relay8_state = 0; halifise(); delay(1000);
|
||||
relay9_state = 0; halifise(); delay(1000);
|
||||
#endif
|
||||
delay(3000);
|
||||
|
||||
}
|
||||
//EEV self-test
|
||||
while ( 1 == 1 ) {
|
||||
EEV_apulses = -(EEV_MAXPULSES + EEV_CLOSE_ADD_PULSES);
|
||||
EEV_adonotcare = 1;
|
||||
EEV_fast = 1;
|
||||
while (EEV_apulses < 0){
|
||||
millis_now = millis();
|
||||
eevise();
|
||||
}
|
||||
//delay(1000);
|
||||
EEV_apulses = EEV_MAXPULSES;
|
||||
EEV_fast = 1;
|
||||
while (EEV_apulses > 0){
|
||||
millis_now = millis();
|
||||
eevise();
|
||||
}
|
||||
//delay(1000);
|
||||
}
|
||||
*/
|
||||
//----------------------------- self-test END----------------------------- ----------------------------- -----------------------------
|
||||
|
||||
|
||||
eeprom_magic_read = EEPROM.read(eeprom_addr);
|
||||
#ifdef INPUTS_AS_BUTTONS
|
||||
pinMode (BUT_RIGHT, INPUT);
|
||||
|
|
@ -1353,12 +1581,17 @@ void setup(void) {
|
|||
|
||||
Get_Temperatures();
|
||||
|
||||
outString.reserve(200);
|
||||
//PrintS_and_D(String(freeMemory())); //!!! debug
|
||||
//!!!
|
||||
//analogWrite(speakerOut, 10);
|
||||
//delay (1500);
|
||||
//analogWrite(speakerOut, 0);
|
||||
//delay (1500);
|
||||
//!!!
|
||||
tone(speakerOut, 2250);
|
||||
delay (1500); // like ups power on
|
||||
noTone(speakerOut);
|
||||
|
||||
outString.reserve(200);
|
||||
//PrintS_and_D(String(freeMemory())); //!!! debug
|
||||
}
|
||||
|
||||
|
||||
|
|
@ -1366,28 +1599,6 @@ void loop(void) {
|
|||
digitalWrite(SerialTxControl, RS485Receive);
|
||||
millis_now = millis();
|
||||
|
||||
//----------------------------- self-test !!!
|
||||
/*
|
||||
digitalWrite(RELAY_HEATPUMP,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_HOTSIDE_CIRCLE,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_COLDSIDE_CIRCLE,HIGH);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_SUMP_HEATER,HIGH);
|
||||
delay(2000);
|
||||
digitalWrite(RELAY_HEATPUMP,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_HOTSIDE_CIRCLE,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_COLDSIDE_CIRCLE,LOW);
|
||||
delay(300);
|
||||
digitalWrite(RELAY_SUMP_HEATER,LOW);
|
||||
*/
|
||||
|
||||
// step one revolution in one direction:
|
||||
//!!! write self-test for EEV
|
||||
//----------------------------- self-test END
|
||||
#ifdef RS485_HUMAN
|
||||
if (((unsigned long)(millis_now - millis_last_printstats) > HUMAN_AUTOINFO) || (millis_last_printstats == 0) ) {
|
||||
PrintStats_Serial();
|
||||
|
|
@ -1444,7 +1655,8 @@ void loop(void) {
|
|||
#endif
|
||||
millis_last_heatpump_on = millis_now;
|
||||
heatpump_state = 0;
|
||||
digitalWrite(RELAY_HEATPUMP, heatpump_state);
|
||||
halifise();
|
||||
//digitalWrite(RELAY_HEATPUMP, heatpump_state); //old, now halifised
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1485,7 +1697,7 @@ void loop(void) {
|
|||
//-------------------display
|
||||
#if (DISPLAY == 2) || (DISPLAY == 1)
|
||||
if( ((unsigned long)(millis_now - millis_displ_update) > millis_displ_update_interval ) || (millis_displ_update == 0) ) {
|
||||
//EEV_ONLY SUPPORT!!!!!!!
|
||||
//!!!EEV_ONLY SUPPORT???
|
||||
#ifndef EEV_ONLY
|
||||
outString = "A:" + String(T_setpoint, 1) + " Real:";
|
||||
if (Ttarget.e == 1) {
|
||||
|
|
@ -1922,7 +2134,7 @@ void loop(void) {
|
|||
#endif
|
||||
millis_last_heatpump_on = millis_now;
|
||||
heatpump_state = 0;
|
||||
digitalWrite(RELAY_HEATPUMP, heatpump_state);
|
||||
//digitalWrite(RELAY_HEATPUMP, heatpump_state); // old, now halifised
|
||||
}
|
||||
|
||||
//alive_check_cycle_after_5_mins:
|
||||
|
|
@ -1951,14 +2163,14 @@ void loop(void) {
|
|||
millis_last_heatpump_on = millis_now;
|
||||
heatpump_state = 0;
|
||||
}
|
||||
digitalWrite(RELAY_HEATPUMP, heatpump_state);
|
||||
//digitalWrite(RELAY_HEATPUMP, heatpump_state); // old, now halifised
|
||||
}
|
||||
|
||||
//disable pump by error
|
||||
if ( errorcode != ERR_OK ) {
|
||||
millis_last_heatpump_on = millis_now;
|
||||
heatpump_state = 0;
|
||||
digitalWrite(RELAY_HEATPUMP, heatpump_state);
|
||||
//digitalWrite(RELAY_HEATPUMP, heatpump_state); // old, now halifised
|
||||
#ifdef RS485_HUMAN
|
||||
PrintS("Error stop: " + String(errorcode, HEX));
|
||||
#endif
|
||||
|
|
@ -1967,9 +2179,9 @@ void loop(void) {
|
|||
//!!! self-test
|
||||
///heatpump_state = 1;
|
||||
|
||||
//write states to relays
|
||||
digitalWrite (RELAY_HEATPUMP, heatpump_state);
|
||||
digitalWrite (RELAY_COLDSIDE_CIRCLE, coldside_circle_state);
|
||||
//!!! write states to relays, old, now halifised
|
||||
//digitalWrite (RELAY_HEATPUMP, heatpump_state);
|
||||
//digitalWrite (RELAY_COLDSIDE_CIRCLE, coldside_circle_state);
|
||||
halifise();
|
||||
#endif
|
||||
}
|
||||
|
|
@ -2063,7 +2275,8 @@ void loop(void) {
|
|||
RS485Serial.println("-");
|
||||
RS485Serial.println(inData);
|
||||
RS485Serial.println("-");
|
||||
}*/
|
||||
}
|
||||
*/
|
||||
//or this debug
|
||||
/*
|
||||
digitalWrite(SerialTxControl, RS485Transmit);
|
||||
|
|
@ -2120,7 +2333,14 @@ void loop(void) {
|
|||
outString += ",\"W1\":" + String(async_wattage);
|
||||
#ifndef EEV_ONLY
|
||||
outString += ",\"A1\":" + String(T_setpoint); //(A)im (target)
|
||||
outString += ",\"RP\":" + String(heatpump_state*RELAY_HEATPUMP);
|
||||
//!!!!! must be changed for G9 v1.4 - personal pin !!!!!!!
|
||||
#ifndef BOARD_TYPE_G9
|
||||
outString += ",\"RP\":" + String(heatpump_state*RELAY_HEATPUMP);
|
||||
#endif
|
||||
#ifdef BOARD_TYPE_G9
|
||||
outString += ",\"RP\":" + String(heatpump_state*20);
|
||||
#endif
|
||||
//!!!!!
|
||||
#endif
|
||||
if (Tci.e == 1) {
|
||||
outString += ",\"TCI\":" + String(Tci.T);
|
||||
|
|
|
|||
Loading…
Reference in a new issue