2022-12-09 11:29:52 +00:00
|
|
|
# Todos
|
|
|
|
|
|
2022-12-16 12:03:36 +00:00
|
|
|
- [x] Decode CableCheckRes."DC_EVSEStatus.EVSEStatusCode": dinDC_EVSEStatusCodeType as readable text
|
2022-12-14 12:53:40 +00:00
|
|
|
- [ ] Decode CableCheckRes."DC_EVSEStatus.EVSEIsolationStatus": dinisolationLevelType as readable text
|
2022-12-21 09:55:26 +00:00
|
|
|
- [x] Encoder: PreChargeReq: is it possible to enable the units for EVTargetVoltage and EVTargetCurrent?
|
|
|
|
|
- [x] Encoder: CurrentDemandReq: is it possible to enable the units for EVTargetVoltage and EVTargetCurrent?
|
|
|
|
|
- [x] Find out, why Alpi reports CableCheckRes = Finished FAILED in v0.4
|
|
|
|
|
- [x] Find out, why Compleo ignores the PowerDeliveryReq START in v0.4
|
2022-12-20 07:35:58 +00:00
|
|
|
- [x] Add date/time into ExiLog
|
2022-12-14 12:53:40 +00:00
|
|
|
- [ ] PevMode: Add state transition in case of failed CableCheck
|
2022-12-09 22:45:58 +00:00
|
|
|
- [x] PevMode: PreChargeReq: Fill EVRESSSOC, EVTargetVoltage, EVTargetCurrent
|
|
|
|
|
- [x] PevMode: PowerDeliveryReq: Fill EVRESSSOC, Stop/Start
|
|
|
|
|
- [x] PevMode: CurrentDemandReq: Fill EVRESSSOC, EVTargetCurrent, EVTargetVoltage
|
2022-12-09 11:29:52 +00:00
|
|
|
- [ ] EvseMode: CurrentDemandRes: Fill EVSEPresentVoltage, EVSEPresentCurrent, EVSEMaximumVoltageLimit, ...LimitAchieved
|
|
|
|
|
- [ ] EvseMode: Fill V2G messages as far as needed, to convince the car to accept it.
|
2022-12-13 20:52:16 +00:00
|
|
|
- [x] PevMode: Fill V2G messages as far as needed, to convince the charger to accept it.
|
|
|
|
|
- [x] PevMode: Find out the SLAC issue on Supercharger and Compleo.
|
2022-12-20 07:35:58 +00:00
|
|
|
- [x] PevMode: Connect the inlet voltage measurement
|
2022-12-13 20:52:16 +00:00
|
|
|
- [x] PevMode: Connect the control of CP
|
2022-12-20 07:35:58 +00:00
|
|
|
- [x] PevMode: Connect the control of Relay
|
2022-12-14 12:53:40 +00:00
|
|
|
- [ ] docu: add link to evse which provides the 5% PWM)
|
|
|
|
|
- [ ] docu: add hardwareInterface into software architecture puml
|
|
|
|
|
- [ ] docu: create hardware architecture picture
|
2022-12-23 15:08:24 +00:00
|
|
|
- [x] docu for Dieter (Schematic, concept idea, DieterLV, DieterHV, ...)
|
2023-02-27 12:11:16 +00:00
|
|
|
- [x] add OLED display to the PEV controller
|
2022-12-09 11:29:52 +00:00
|
|
|
- [ ] in addressManager, replace the print by addToTrace
|
|
|
|
|
- [ ] Resolve the todo-markers in the code
|
2022-12-09 22:45:58 +00:00
|
|
|
- [ ] Still fixed addresses (MAC, IP) used somewhere?
|
2022-12-09 11:29:52 +00:00
|
|
|
- [ ] (and much more)
|
