github-mirrors/pyPLC
1
0
Fork 0
mirror of https://github.com/uhi22/pyPLC.git synced 2024-11-20 01:13:58 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

docu: coupling network clarifications

Browse source
This commit is contained in:
uhi22 2023-08-06 23:35:20 +02:00
parent 14c166d067
commit 0e8d3bd345
3 changed files with 13 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
doc/EvseMode.md
View file

@ -84,5 +84,12 @@ The only important thing is, that the coil does not connect directly to the CP a
lives in parallel on the CP / PE lines. The coupling network of 1nF and 150ohms in series assures, that the RF signals and the 12V PWM
are not interfering each other.
In other words: between the CP and the PE, there is the series of tree components: The 1nF, the 150ohm, and the secondary coil of the RF transformer. The order does not matter, also the polarity not. This means, to remove all parts on the TPlink which are connected to the secondary coil of the RF transformer, and connect the 1n and 150ohms to it.
Regarding the type of capacitor and the exact values of the C and R: The precise values do not matter, I guess everything between 33 ohms and 220 ohm should work, and also 0.5nF, 1nF and 2.2nF. Higher capacitor values could slow the edges of the 1kHz PWM, so this should be avoided. The type of capacitor does not matter.
The picture shows the two-coil variant:
![image](TPlink_RF_transformer_and_coupling_network.jpg)
These are the possible coupling variants. All are fine:
![image](RF_coupling_eight_variants.jpg)

BIN
doc/RF_coupling_eight_variants.jpg Normal file
View file

Binary file not shown.
Side by side

After

Width:  |  Height:  |  Size: 42 KiB

5
readme.md
View file

@ -433,6 +433,11 @@ In the cable check phase, the charger checks the following things:
- Software not configured to use the correct output path for the StateC switching
2. Isolation of the DC path. It is recommended to use two contactors, one for each DC lines, to avoid asymmetrical results in the isolation measurements.
### Q6: How to connect the PLC modem to the CP and PE?
This is explained in the EvseMode manual. The coupling is the same in EvseMode and PevMode.
[EvseMode.md FAQ Question 8](doc/EvseMode.md#q8-which-side-of-the-tplink-is-the-pe-and-which-is-the-cp)
## Credits
Thanks to catphish to start the investigations regarding the homeplug modems and publishing them on OpenInverter forum.
Thanks to johu for the OpenInverter forum, and for the first video of the early experiments, the beaglebone integration and CHAdeMO integration.