github-mirrors/pyPLC
1
0
Fork 0
mirror of https://github.com/uhi22/pyPLC.git synced 2024-09-11 00:38:29 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity

docu: more details to the RF transformer and coupling

Browse source
This commit is contained in:
uhi22 2023-08-04 12:21:32 +02:00
parent 39fd5b893b
commit 14c166d067
2 changed files with 5 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

7
doc/EvseMode.md
View file

@ -76,10 +76,13 @@ Not at the moment. The embedded CCS solutions on ESP32 or STM32 are implementing
### Q8: Which side of the TPlink is the PE and which is the CP?
The TPlink has a RF transformer with 3 coils. Two coils are connected to the modem chip (the transmit and the receive path), and the
third coil is the way to the outside world, in our case the CP and PE. The modulation does not care for the polarity of this path. It uses
The TPlink has a RF transformer with two or three coils. One or two coils are connected to the modem chip (the transmit and the receive path), and the
last coil is the way to the outside world, in our case the CP and PE. The modulation does not care for the polarity of this path. It uses
radio frequencies in the range of 2MHz to 30MHz.
This means, it does not matter which side of the "outside coil" is connected to PE and which to CP.
The only important thing is, that the coil does not connect directly to the CP and PE, because this would destroy the 12V PWM signal, which
lives in parallel on the CP / PE lines. The coupling network of 1nF and 150ohms in series assures, that the RF signals and the 12V PWM
are not interfering each other.
The picture shows the two-coil variant:
![image](TPlink_RF_transformer_and_coupling_network.jpg)

BIN
doc/TPlink_RF_transformer_and_coupling_network.jpg Normal file
View file

Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 107 KiB