EvseMode: show data of the power supply

fsmEvse.py

@@ -262,7 +262,7 @@ class fsmEvse():
                     self.simulatedPresentVoltage += 20
                 if (self.simulatedPresentVoltage<uTarget):
                     self.simulatedPresentVoltage += 5
-                strPresentVoltage = str(self.simulatedPresentVoltage) # "345"
+                strPresentVoltage = str(int(self.simulatedPresentVoltage*10)/10) # "345"
                 # in case we control a real power supply: give the precharge target to it
                 self.hardwareInterface.setPowerSupplyVoltageAndCurrent(uTarget, 1)
                 self.callbackShowStatus(strPresentVoltage, "EVSEPresentVoltage")
@@ -323,7 +323,7 @@ class fsmEvse():
                 except:
                     self.addToTrace("ERROR: Could not decode the CurrentDemandReq")
                 self.simulatedPresentVoltage = uTarget + 3*random() # The charger provides the voltage which is demanded by the car.
-                strPresentVoltage = str(self.simulatedPresentVoltage)
+                strPresentVoltage = str(int(self.simulatedPresentVoltage*10)/10) # "345"
                 self.callbackShowStatus(strPresentVoltage, "EVSEPresentVoltage")
                 strEVSEPresentCurrent = "1" # Just as a dummy current
                 if (self.blChargeStopTrigger == 1):
@@ -353,7 +353,7 @@ class fsmEvse():
                 # todo: check the request content, and fill response parameters
                 # simulate the decreasing voltage during the weldingDetection:
                 self.simulatedPresentVoltage = self.simulatedPresentVoltage*0.8 + 3*random()
-                strPresentVoltage = str(self.simulatedPresentVoltage)
+                strPresentVoltage = str(int(self.simulatedPresentVoltage*10)/10) # "345"
                 self.callbackShowStatus(strPresentVoltage, "EVSEPresentVoltage")
                 msg = addV2GTPHeader(exiEncode("E"+self.schemaSelection+"j_"+strPresentVoltage)) # EDj for Encode, Din, WeldingDetectionRes
                 self.showDecodedTransmitMessage(msg)

pyPlc.py

@@ -60,6 +60,12 @@ def cbShowStatus(s, selection=""):
     if (selection == "UandI"):
         lblRequestedUandI['text']= "Target " + s + ""
         s=""
+    if (selection == "PowerSupplyUPresent"):
+        lblPowerSupplyUPresent['text']= "UPresent " + s + "V"
+        s=""
+    if (selection == "PowerSupplyUTarget"):
+        lblPowerSupplyUTarget['text']= "UTarget " + s + "V"
+        s=""
     if (len(s)>0):
         lblStatus['text']=s
     root.update()
@@ -101,8 +107,19 @@ if (myMode == C_EVSE_MODE):
         print("starting in EvseMode")
  
 root = tk.Tk()
-root.geometry("400x350")
+#root.geometry("400x350")
+root.geometry("600x350")
 lastKey = ''
+if (myMode == C_EVSE_MODE):
+    frmPowerSupply = tk.Frame(root, bg='lightblue', bd=3)
+    frmPowerSupply.pack(side='right', fill='both', expand='True')
+    lblPowerSupplyUTarget = tk.Label(frmPowerSupply, text="(UTarget)", bg='lightblue')
+    lblPowerSupplyUTarget.config(font=('Helvetica bold', 18))
+    lblPowerSupplyUTarget.pack()
+    lblPowerSupplyUPresent = tk.Label(frmPowerSupply, text="(PowerSupplyUPresent)", bg='lightblue')
+    lblPowerSupplyUPresent.config(font=('Helvetica bold', 18))
+    lblPowerSupplyUPresent.pack()
+
 lblHelp = tk.Label(root, justify= "left")
 lblHelp['text']="x=exit \nS=GET_SW \nP=PEV mode \nE=EVSE mode \nL=Listen mode \ns=SET_KEY \nG=GET_KEY (try twice) \nt=SET_KEY modified \n space=stop charging"
 lblHelp.pack()
@@ -124,6 +141,7 @@ lblEVSEPresentVoltage = tk.Label(root, text="(EVSEPresentVoltage)")
 lblEVSEPresentVoltage.config(font=('Helvetica bold', 16))
 lblEVSEPresentVoltage.pack()
 
+
 if (myMode == C_EVSE_MODE):
     lblTestcase = tk.Label(root, text="(test case)")
     lblTestcase.pack()

pyPlcHomeplug.py

@@ -730,6 +730,19 @@ class pyPlcHomeplug():
                 self.addToTrace("[EVSE] transmitting ATTEN_CHAR.IND")
                 self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
                 
+    def evaluateStartAttenCharInd(self):
+        # self.addToTrace("received START_ATTEN_CHAR.IND")
+        # nothing to do as PEV or EVSE.
+        # interpretation just in case we use it as special message in EVSE mode to get information from the power supply
+        if (self.iAmEvse==1):
+            if ((self.myreceivebuffer[38] == 0xDC) and (self.myreceivebuffer[39] == 0x55) and (self.myreceivebuffer[40] == 0xAA)):
+                uPresent = self.myreceivebuffer[43]
+                uPresent*=256
+                uPresent+=self.myreceivebuffer[44]
+                uPresent/=10 # scaling in the message is 0.1V
+                self.callbackShowStatus(str(uPresent), "PowerSupplyUPresent")
+                # Todo: evaluate other information of the power supply, like cable check result, current, temperature, ...
+
     def evaluateAttenCharInd(self):
         self.addToTrace("received ATTEN_CHAR.IND")    
         if (self.iAmPev==1):
@@ -804,6 +817,8 @@ class pyPlcHomeplug():
             self.evaluateSlacParamReq()
         if (mmt == CM_SLAC_PARAM + MMTYPE_CNF):
             self.evaluateSlacParamCnf()
+        if (mmt == CM_START_ATTEN_CHAR + MMTYPE_IND):
+            self.evaluateStartAttenCharInd()
         if (mmt == CM_MNBC_SOUND + MMTYPE_IND):
             self.evaluateMnbcSoundInd()
         if (mmt == CM_ATTEN_CHAR + MMTYPE_IND):
@@ -1130,6 +1145,7 @@ class pyPlcHomeplug():
         self.composeSpecialMessage()
         self.addToTrace("transmitting SpecialMessage to control the power supply")
         self.transmit(self.mytransmitbuffer)
+        self.callbackShowStatus(str(targetVoltage), "PowerSupplyUTarget")
 
     def enterPevMode(self):
         self.iAmEvse = 0 # not emulating a charging station