From 2b87bcaa4293cc2bdeefc84a5dcd38b668d49bab Mon Sep 17 00:00:00 2001 From: uhi22 Date: Sun, 28 May 2023 23:39:00 +0200 Subject: [PATCH] docu: Ioniq investigations. More details for powerline adaptors. --- doc/hardware.md | 15 ++++++++++- doc/ioniq_investigations.md | 52 +++++++++++++++++++++++++++++++++++++ 2 files changed, 66 insertions(+), 1 deletion(-) create mode 100644 doc/ioniq_investigations.md diff --git a/doc/hardware.md b/doc/hardware.md index 2f10624..a6a3775 100644 --- a/doc/hardware.md +++ b/doc/hardware.md @@ -7,21 +7,34 @@ ![image](https://user-images.githubusercontent.com/98478946/197698551-25887d20-1d90-40d1-9704-a5770db46739.png) ![image](https://user-images.githubusercontent.com/98478946/197698729-d66a847a-b93f-495b-82ec-ca1430708336.png) +Contains an Atheros INT6400A1G. + Pro: * Routes the SLAC traffic from RF port to Ethernet, using the original software (INT6000-MAC-4-4-4405-00-4497-20101201-FINAL-B) and unchanged parametrization. * Works as CentralCoordinator. This means, it sends out "coordinator packets" which enables the connected car to send out the first SLAC message. +* Works on the PEV side with original software and original parametrization. Contra: * Does not support the read-out of the configuration using the github.com/qca/open-plc-utils. -* Seems not to be able to send SLAC messages on the RF port. + + +### Devolo Powerline 200+ MT2710 + +Is discussed here: https://openinverter.org/forum/viewtopic.php?p=57003#p57003 +It uses an Atheros AR6400-AC30. + +Todo: To be tested... ### Devolo dLAN 1200+ Todo: add picture how to connect the DC power and the RF ![image](https://user-images.githubusercontent.com/98478946/197516219-33440602-3feb-4c91-b353-efa90969b419.png) +The open-plc-utils report the version MAC-QCA7500-2.8.0.30-01-20190707-CS. +Contra: +- Even with the modified configuration for pev (according to https://openinverter.org/forum/viewtopic.php?p=55120#p55120), the QCA7500 does not send SLAC parameter requests. This means: Cannot be used as pev. ### TPlink TL-PA4010P This adaptor was suggested by https://openinverter.org/forum/viewtopic.php?p=37085#p37085 and there, diff --git a/doc/ioniq_investigations.md b/doc/ioniq_investigations.md new file mode 100644 index 0000000..54ae7c2 --- /dev/null +++ b/doc/ioniq_investigations.md @@ -0,0 +1,52 @@ + +# Hyundai Ioniq (2018) investigations + +## What PLC chip is used? + +QCA7005. +The software version is MAC-QCA7005-1.1.0.730-04-20140815-CS (found by sending GetSwVersion). + +## Which module contains the PLC interface, and where is it located? +` +In the Kona, there is a CCM (Charge Control Module) +https://parts.hyundaicanada.com/p/Hyundai_2021_Kona-ELECTRIC-GL-STD-5P/CHARGE-CONTROL-MODULE-PLC/125385163/91950K4510.html +Part Number: 91950K4510. In the picture this is 91950Q + +For the Ioniq we find +https://www.ebay.de/itm/394528814451?_trkparms=amclksrc%3DITM%26aid%3D1110006%26algo%3DHOMESPLICE.SIM%26ao%3D1%26asc%3D20201210111314%26meid%3Dd4a895de93cc438da026c4488e103aac%26pid%3D101195%26rk%3D3%26rkt%3D12%26sd%3D155444727217%26itm%3D394528814451%26pmt%3D1%26noa%3D0%26pg%3D2047675%26algv%3DSimplAMLv11WebTrimmedV3MskuWithLambda85KnnRecallV1V4V6ItemNrtInQueryAndCassiniVisualRankerAndBertRecall&_trksid=p2047675.c101195.m1851&amdata=cksum%3A394528814451d4a895de93cc438da026c4488e103aac%7Cenc%3AAQAIAAABQA2rugFlOq3qu1cLac%252F%252Fk6Vp0Oa0HaJIqoXKeIiOR%252BTUgsSvHaeyPxKYu6UqHqq7GaGyKVqHQnjeiiXcQpMGw2t3aB%252BssGfjtIWOBj8wExc7oYYP7xGMyQCrHDyDaSaWjB1CueI3A94n0yxXX5dx5gDO4pgNGYOGnz%252BnDlP61rIVr1Utg%252B1XyXIRruqox9MiB0wwnlIyoFSPB8wRYRZrLIzMxrPqwAj0dT%252FCbYeEsaCM46Xhbt%252BZssKJD2DuF1cyqXaYHd3QCKHQpwIVLe51hi%252B9vriq8dHlSRhB1xCOULlON4DO4I5C62jCqCT%252BVILcAv0JbaNXT81CXee8ym0PSIIaz5QEm1bhRyrfz2Nj6cFvyFRHnSasf8HUuqPyt3CNY1zORaJc4AzorOsluSFm1oSeH5KOKHEsYZPKm5LShPjI%7Campid%3APL_CLK%7Cclp%3A2047675 + +Fotos of the Kona controller: https://openinverter.org/forum/viewtopic.php?t=1195 + +For the Ioniq face lift: +91950-G7300 +Hyundai Ioniq EV Ladesteuermodul ECU 91950-G7300 2021 RHD 17709538 +https://www.hyundaipartsdeal.com/genuine/hyundai-charge-control-module-plc~91950-g7300.html + +For the Ioniq vFL: +https://www.ebay.com/itm/304610337175 +OEM Charging Control Module PLC Hyundai Ioniq electric 2017-2019 / 91950-G7200 +https://www.hyundaipartsdeal.com/genuine/hyundai-charge-control-module-plc~91950-g7200.html + +In https://www.hyundaipartsdeal.com/genuine/hyundai-charge-control-module-plc~91950-g7200.html?vin=&make=Hyundai&model=Ioniq&year=2018&submodel=Electric&extra1=&extra2=&filter=() it looks like this module is in or below the fuse box in the engine compartment. + +In +https://autotechnician.co.uk/hyundai-ioniq-electric-ae-ev-2016-present/ +they write: A Charge Control Module is located under the front passenger seat. It converts the PLC communication from the external charging post into CAN that can be understood by the rest of the car. +But: Under the passenger seat, there is the seat control unit: Hyundai Ioniq Steuergerät Sitz 88196G2200. No other control unit found there. + +In +https://openinverter.org/forum/viewtopic.php?p=19675&sid=b0b1e32820cf0af9227c684f17bb82b5#p19675 +there is the discussion, that the PCB is nearly the same between Kona and Ioniq. + +In +https://openinverter.org/forum/viewtopic.php?p=20110#p20110 there is the Kona wiring diagram with pinout. + +And for the Ioniq: https://openinverter.org/forum/viewtopic.php?p=20118#p20118. The CP of the CCM connects via a green wire to connector P111.8 (male). +Also CP is pin7 of the OBC, with a green wire links to pin11 of P52. + +In https://openinverter.org/forum/viewtopic.php?p=20132#p20132 there is a foto which shows the unit under the DRIVER seat, below the left guiding rail, screwed on the floor pan. + + + + +