feature: show inlet voltage in the GUI

hardwareInterface.py

@@ -88,12 +88,14 @@ class hardwareInterface():
         return self.simulatedSoc
         
         
-    def __init__(self, callbackAddToTrace=None):
+    def __init__(self, callbackAddToTrace=None, callbackShowStatus=None):
         self.callbackAddToTrace = callbackAddToTrace
+        self.callbackShowStatus = callbackShowStatus
         self.loopcounter = 0
         self.outvalue = 0
         self.simulatedSoc = 20.0 # percent
         self.inletVoltage = 0.0 # volts
+        self.rxbuffer = ""
         self.findSerialPort()
         
     def resetSimulation(self):
@@ -108,6 +110,22 @@ class hardwareInterface():
         if (self.isInterfaceOk):        
             self.ser.close()
             
+    def evaluateReceivedData(self, s):
+        self.rxbuffer += s
+        x=self.rxbuffer.find("A0=")
+        if (x>=0):
+            s = self.rxbuffer[x+3:x+7]
+            if (len(s)==4):
+                try:
+                    self.uInlet_V = int(s) / 1024.0 * 1.08 * (6250) / (4.7+4.7)
+                    
+                    self.callbackShowStatus(format(self.uInlet_V,".1f"), "uInlet")
+                except:
+                    # keep last known value, if nothing new valid was received.
+                    pass
+                #self.addToTrace("RX data ok " + s)
+                self.rxbuffer = self.rxbuffer[x+3:] # consume the receive buffer entry
+    
     def mainfunction(self):
         if (self.simulatedSoc<100):
             if ((self.outvalue & 2)!=0):
@@ -122,7 +140,12 @@ class hardwareInterface():
                 self.ser.write(bytes("do"+s+"\n", "utf-8")) # set outputs of dieter, see https://github.com/uhi22/dieter
             s = self.ser.read(100)
             if (len(s)>0):
-                self.addToTrace(str(len(s)) + " bytes received: " + str(s, 'utf-8').strip())
+                try:
+                    s = str(s, 'utf-8').strip()
+                except:
+                    s = "" # for the case we received corrupted data (not convertable as utf-8)
+                self.addToTrace(str(len(s)) + " bytes received: " + s)
+                self.evaluateReceivedData(s)
         
 def myPrintfunction(s):
     print("myprint " + s)

pyPlc.py

@@ -36,6 +36,9 @@ def cbShowStatus(s, selection=""):
     if (selection == "pevmac"):
         lblPevMac['text']="PEV MAC " + s
         s=""
+    if (selection == "uInlet"):
+        lblUInlet['text']= "UInlet " + s + "V"
+        s=""
     if (len(s)>0):
         lblStatus['text']=s
     root.update()
@@ -69,6 +72,9 @@ lblStatus = tk.Label(root, text="(Status)")
 lblStatus.pack()
 lblPevMac = tk.Label(root, text="(pev mac)")
 lblPevMac.pack()
+lblUInlet = tk.Label(root, text="(U Inlet)")
+lblUInlet.config(font=('Helvetica bold', 26))
+lblUInlet.pack()
 lblMode = tk.Label(root, text="(mode)")
 lblMode.pack()
 

pyPlcWorker.py

@@ -29,7 +29,7 @@ class pyPlcWorker():
         self.oldAvlnStatus = 0
         self.isSimulationMode = isSimulationMode
         self.hp = pyPlcHomeplug.pyPlcHomeplug(self.workerAddToTrace, self.callbackShowStatus, self.mode, self.addressManager, self.callbackReadyForTcp, self.isSimulationMode)
-        self.hardwareInterface = hardwareInterface.hardwareInterface(self.workerAddToTrace)
+        self.hardwareInterface = hardwareInterface.hardwareInterface(self.workerAddToTrace, self.callbackShowStatus)
         self.hp.printToUdp("pyPlcWorker init")
         # Find out the version number, using git.
         # see https://stackoverflow.com/questions/14989858/get-the-current-git-hash-in-a-python-script