diff --git a/doc/todo.md b/doc/todo.md
index e74c607..512285d 100644
--- a/doc/todo.md
+++ b/doc/todo.md
@@ -1,5 +1,12 @@
 # Todos
 
+- [ ] Decode CableCheckRes."DC_EVSEStatus.EVSEStatusCode": dinDC_EVSEStatusCodeType as readable text
+- [ ] Decode CableCheckRes."DC_EVSEStatus.EVSEIsolationStatus": dinisolationLevelType as readable text
+- [ ] Encoder: PreChargeReq: is it possible to enable the units for EVTargetVoltage and EVTargetCurrent?
+- [ ] Find out, why Alpi reports CableCheckRes = Finished FAILED in v0.4
+- [ ] Find out, why Compleo ignores the PowerDeliveryReq START in v0.4
+- [ ] Add date/time into ExiLog
+- [ ] PevMode: Add state transition in case of failed CableCheck
 - [x] PevMode: PreChargeReq: Fill EVRESSSOC, EVTargetVoltage, EVTargetCurrent
 - [x] PevMode: PowerDeliveryReq: Fill EVRESSSOC, Stop/Start
 - [x] PevMode: CurrentDemandReq: Fill EVRESSSOC, EVTargetCurrent, EVTargetVoltage
@@ -10,7 +17,10 @@
 - [ ] PevMode: Connect the inlet voltage measurement
 - [x] PevMode: Connect the control of CP
 - [ ] PevMode: Connect the control of Relay
-- [ ] improve docu (update layer diagram, improve hardware docu, add link to evse which provides the 5% PWM)
+- [ ] docu: add link to evse which provides the 5% PWM)
+- [ ] docu: add hardwareInterface into software architecture puml
+- [ ] docu: create hardware architecture picture
+- [ ] docu for Dieter (Schematic, concept idea, Dieter0, Dieter1, ...)
 - [ ] in addressManager, replace the print by addToTrace
 - [ ] Resolve the todo-markers in the code
 - [ ] Still fixed addresses (MAC, IP) used somewhere?
diff --git a/exiConnector.py b/exiConnector.py
index b23c2e8..7f3dfc8 100644
--- a/exiConnector.py
+++ b/exiConnector.py
@@ -243,8 +243,8 @@ def testReadExiFromSnifferFile():
             testDecoder(s, "DD", "")
 
 def testReadExiFromExiLogFile():
-    file1 = open('PevExiLog.txt', 'r')
-    fileOut = open('PevExiLog_decoded.txt', 'w')
+    file1 = open('PevExiLog_2022-12-13_westparkAlpi_twice.txt', 'r')
+    fileOut = open('PevExiLog_2022-12-13_westparkAlpi_twice.txt.decoded.txt', 'w')
     # example: "ED 809a02004080c1014181c210b8"
     Lines = file1.readlines()
     for myLine in Lines: