github-mirrors/pyPLC
1
0
Fork 0
mirror of https://github.com/uhi22/pyPLC.git synced 2024-11-10 01:05:42 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

changes to startup script

Browse source
This commit is contained in:
johannes 2023-12-12 12:23:49 +01:00
parent 7014d1c2d2
commit 73955f8b03
3 changed files with 19 additions and 8 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

1
fsmPev.py
View file

@ -286,6 +286,7 @@ class fsmPev():
self.sessionId = strSessionId self.sessionId = strSessionId
except: except:
self.addToTrace("ERROR: Could not decode the sessionID") self.addToTrace("ERROR: Could not decode the sessionID")
if ((strResponseCode!="OK_NewSessionEstablished") and (strResponseCode!="OK")): if ((strResponseCode!="OK_NewSessionEstablished") and (strResponseCode!="OK")):
# According to the standard, the only valid response code is OK_NewSessionEstablished. # According to the standard, the only valid response code is OK_NewSessionEstablished.
# But the ABB chargers use "OK", so we need to accept this, too. Discussed # But the ABB chargers use "OK", so we need to accept this, too. Discussed

4
hardwareInterface.py
View file

@ -12,8 +12,8 @@ from time import sleep, time
from configmodule import getConfigValue, getConfigValueBool from configmodule import getConfigValue, getConfigValueBool
import sys # For exit_on_session_end hack import sys # For exit_on_session_end hack
PinCp = "P8_18" PinCp = "P9_41"
PinPowerRelay = "P8_16" PinPowerRelay = "P9_17"
if (getConfigValue("digital_output_device")=="beaglebone"): if (getConfigValue("digital_output_device")=="beaglebone"):
# In case we run on beaglebone, we want to use GPIO ports. # In case we run on beaglebone, we want to use GPIO ports.

22
starter.sh
View file

@ -39,9 +39,11 @@ sysctl net.ipv6.conf.eth0.keep_addr_on_down=1
# Todo: Why this needed? On raspberry, where the NetworkManager is not runnning, this disturbs, because # Todo: Why this needed? On raspberry, where the NetworkManager is not runnning, this disturbs, because
# afterwards the pyPlc does not see the interfaces IPv6 address. # afterwards the pyPlc does not see the interfaces IPv6 address.
# Todo: make this configurable, for the cases we need this. # Todo: make this configurable, for the cases we need this.
# ip link set eth0 down ip link set eth0 down
ip link set can0 down
sleep 1 sleep 1
# ip link set eth0 up ip link set eth0 up
ip link set can0 up type can restart-ms 100 bitrate 500000
sleep 1 sleep 1
# show the addresses # show the addresses
@ -53,17 +55,25 @@ pwd
# create directory for the log files. # create directory for the log files.
mkdir -p log mkdir -p log
# prepare the file names for the log files # prepare the file names for the log files
pushd log
gzip *.log || true
popd
date=$(date "+%Y-%m-%d_%H%M%S") date=$(date "+%Y-%m-%d_%H%M%S")
logfile=./log/"$date"_pevNoGui.log #logfile=./log/"$date"_pevNoGui.log
tcpdump_logfile=./log/"$date"_tcpdump.pcap #logfile=./log/pevNoGui.log
index=`cat log/logindex`
logfile=`printf "log/%04d_pevNoGui.log" $index`
tcpdump_logfile=`printf "log/%04d_tcpdump.pcap" $index`
index=$(($index + 1))
echo $index > log/logindex
echo "logfile: $logfile" echo "logfile: $logfile"
echo "tcpdump_logfile: $tcpdump_logfile" echo "tcpdump_logfile: $tcpdump_logfile"
# start the tcpdump # start the tcpdump
start_tcpdump "$tcpdump_logfile" #start_tcpdump "$tcpdump_logfile"
echo "$date" >> "$logfile" echo "$date" > "$logfile"
git log --oneline -1 >> "$logfile" || echo "Not a git repo" >> "$logfile" git log --oneline -1 >> "$logfile" || echo "Not a git repo" >> "$logfile"
ip addr >> "$logfile" ip addr >> "$logfile"
pwd >> "$logfile" pwd >> "$logfile"