feature: integrated celeron55s hardwareinterface. Improved pev timeouts.

.gitignore

@@ -3,5 +3,5 @@
 /doc/*.jar
 *.bat
 PevExiLog*.txt
-pyPlc.ini
+*.ini
 /log

doc/pyPlc.ini.template

@@ -75,3 +75,8 @@ serial_baud = 115200
 # 11 * 6 * 4.1V = 66 * 4.1V = 270V
 charge_target_voltage = 270
 
+# By using an external manager script, this is useful for splitting charging
+# into separately logged sessions and avoiding logging when not connected to a
+# charger
+exit_on_session_end = False
+

fsmPev.py

@@ -180,7 +180,9 @@ class fsmPev():
         
     def isTooLong(self):
         # The timeout handling function.
-        limit = 33 # number of call cycles until timeout. Default 33 cycles with 30ms, means approx. 1 second.
+        limit = 66 # number of call cycles until timeout. Default 66 cycles with 30ms, means approx. 2 seconds.
+        # This 2s is the specified timeout time for many messages, fitting to the
+        # performance time of 1.5s. Exceptions see below.
         if (self.state==stateWaitForChargeParameterDiscoveryResponse):
             limit = 5*33 # On some charger models, the chargeParameterDiscovery needs more than a second. Wait at least 5s.
         if (self.state==stateWaitForCableCheckResponse):
@@ -188,7 +190,11 @@ class fsmPev():
         if (self.state==stateWaitForPreChargeResponse):
             limit = 30*33 # PreCharge may need some time. Wait at least 30s.
         if (self.state==stateWaitForPowerDeliveryResponse):
-            limit = 5*33 # PowerDelivery may need some time. Wait at least 5s. On Compleo charger, observed more than 1s until response.
+            limit = 6*33 # PowerDelivery may need some time. Wait at least 6s. On Compleo charger, observed more than 1s until response.
+			# specified performance time is 4.5s (ISO)
+        if (self.state==stateWaitForCurrentDemandResponse):
+            limit = 5*33 # Test with 5s timeout. Just experimental.
+            # The specified performance time is 25ms (ISO), the specified timeout 250ms.
         return (self.cyclesInState > limit)
         
     def stateFunctionNotYetInitialized(self):

hardwareInterface.py

@@ -10,6 +10,7 @@ import serial # the pyserial
 from serial.tools.list_ports import comports
 from time import sleep
 from configmodule import getConfigValue, getConfigValueBool
+import sys # For exit_on_session_end hack
 
 if (getConfigValue("digital_output_device")=="beaglebone"):
     # In case we run on beaglebone, we want to use GPIO ports.
@@ -24,11 +25,31 @@ class hardwareInterface():
             return True # a "dieter" output device is expected to be connected on serial port.
         if (getConfigValue("analog_input_device")=="dieter"):
             return True # a "dieter" input device is expected to be connected on serial port.
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            return True
+        if (getConfigValue("analog_input_device")=="celeron55device"):
+            return True
         return False # non of the functionalities need a serial port.
         
     def findSerialPort(self):
+        baud = int(getConfigValue("serial_baud"))
+        if (getConfigValue("serial_port")!="auto"):
+            port = getConfigValue("serial_port")
+            try:
+                self.addToTrace("Using serial port " + port)
+                self.ser = serial.Serial(port, baud, timeout=0)
+                self.isSerialInterfaceOk = True
+            except:
+                if (self.needsSerial()):
+                    self.addToTrace("ERROR: Could not open serial port.")
+                else:
+                    self.addToTrace("Could not open serial port, but also do not need it. Ok.")
+                self.ser = None
+                self.isSerialInterfaceOk = False
+            return
+
         ports = []
-        self.addToTrace('Available serial ports:')
+        self.addToTrace('Auto detection of serial ports. Available serial ports:')
         for n, (port, desc, hwid) in enumerate(sorted(comports()), 1):
             if (port=="/dev/ttyAMA0"):
                 self.addToTrace("ignoring /dev/ttyAMA0, because this is not an USB serial port")
@@ -47,7 +68,7 @@ class hardwareInterface():
         else:
             self.addToTrace("ok, we take the first port, " + ports[0])
             try:
-                self.ser = serial.Serial(ports[0], 19200, timeout=0)
+                self.ser = serial.Serial(ports[0], baud, timeout=0)
                 self.isSerialInterfaceOk = True
             except:
                 self.addToTrace("ERROR: Could not open serial port.")
@@ -61,24 +82,32 @@ class hardwareInterface():
         self.addToTrace("Setting CP line into state B.")
         if (getConfigValue("digital_output_device")=="beaglebone"):
             GPIO.output("P8_18", GPIO.LOW)
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("cp=0\n", "utf-8"))
         self.outvalue &= ~1
         
     def setStateC(self):
         self.addToTrace("Setting CP line into state C.")
         if (getConfigValue("digital_output_device")=="beaglebone"):
             GPIO.output("P8_18", GPIO.HIGH)
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("cp=1\n", "utf-8"))
         self.outvalue |= 1
         
     def setPowerRelayOn(self):
         self.addToTrace("Switching PowerRelay ON.")
         if (getConfigValue("digital_output_device")=="beaglebone"):
             GPIO.output("P8_16", GPIO.HIGH)
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("contactor=1\n", "utf-8"))
         self.outvalue |= 2
 
     def setPowerRelayOff(self):
         self.addToTrace("Switching PowerRelay OFF.")
         if (getConfigValue("digital_output_device")=="beaglebone"):
             GPIO.output("P8_16", GPIO.LOW)
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("contactor=0\n", "utf-8"))
         self.outvalue &= ~2
 
     def setRelay2On(self):
@@ -90,17 +119,26 @@ class hardwareInterface():
         self.outvalue &= ~4
         
     def getPowerRelayConfirmation(self):
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            return self.contactor_confirmed
         return 1 # todo: self.contactor_confirmed
         
     def triggerConnectorLocking(self):
         self.addToTrace("Locking the connector")
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("lock\n", "utf-8"))
         # todo control the lock motor into lock direction until the end (time based or current based stopping?)
 
     def triggerConnectorUnlocking(self):
         self.addToTrace("Unocking the connector")
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.ser.write(bytes("unlock\n", "utf-8"))
         # todo control the lock motor into unlock direction until the end (time based or current based stopping?)
 
     def isConnectorLocked(self):
+        # TODO: Read the lock= value from the hardware so that this works
+        #if (getConfigValue("digital_output_device")=="celeron55device"):
+        #    return self.lock_confirmed
         return 1 # todo: use the real connector lock feedback
 
     def getInletVoltage(self):
@@ -109,26 +147,45 @@ class hardwareInterface():
         return self.inletVoltage
         
     def getAccuVoltage(self):
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            return self.accuVoltage
         #todo: get real measured voltage from the accu
         self.accuVoltage = 230
         return self.accuVoltage
 
     def getAccuMaxCurrent(self):
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            # The overall current limit is currently hardcoded in
+            # OpenV2Gx/src/test/main_commandlineinterface.c
+            EVMaximumCurrentLimit = 250
+            if self.accuMaxCurrent >= EVMaximumCurrentLimit:
+                return EVMaximumCurrentLimit
+            return self.accuMaxCurrent
         #todo: get max charging current from the BMS
         self.accuMaxCurrent = 10
         return self.accuMaxCurrent
 
     def getAccuMaxVoltage(self):
-        #todo: get max charging voltage from the BMS
+        if getConfigValue("charge_target_voltage"):
-        self.accuMaxVoltage = 230
+            self.accuMaxVoltage = getConfigValue("charge_target_voltage")
+        else:
+            #todo: get max charging voltage from the BMS
+            self.accuMaxVoltage = 230
         return self.accuMaxVoltage
 
     def getIsAccuFull(self):
-        #todo: get "full" indication from the BMS
+        if (getConfigValue("digital_output_device")=="celeron55device"):
-        self.IsAccuFull = (self.simulatedSoc >= 98)
+            self.IsAccuFull = (self.soc_percent >= 98)
+        else:
+            #todo: get "full" indication from the BMS
+            self.IsAccuFull = (self.simulatedSoc >= 98)
         return self.IsAccuFull
 
     def getSoc(self):
+        if self.callbackShowStatus:
+            self.callbackShowStatus(format(self.soc_percent,".1f"), "soc")
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            return self.soc_percent
         #todo: get SOC from the BMS
         self.callbackShowStatus(format(self.simulatedSoc,".1f"), "soc")
         return self.simulatedSoc
@@ -142,15 +199,33 @@ class hardwareInterface():
     def __init__(self, callbackAddToTrace=None, callbackShowStatus=None):
         self.callbackAddToTrace = callbackAddToTrace
         self.callbackShowStatus = callbackShowStatus
+
         self.loopcounter = 0
         self.outvalue = 0
         self.simulatedSoc = 20.0 # percent
+
         self.inletVoltage = 0.0 # volts
+        self.accuVoltage = 0.0
+        self.lock_confirmed = False  # Confirmation from hardware
+        self.cp_pwm = 0.0
+        self.soc_percent = 0.0
+        self.accuMaxCurrent = 0.0
+        self.contactor_confirmed = False  # Confirmation from hardware
+        self.plugged_in = None  # None means "not known yet"
+
+        self.logged_inlet_voltage = None
+        self.logged_dc_link_voltage = None
+        self.logged_cp_pwm = None
+        self.logged_max_charge_a = None
+        self.logged_soc_percent = None
+        self.logged_contactor_confirmed = None
+        self.logged_plugged_in = None
+
         self.rxbuffer = ""
+
         self.findSerialPort()
         self.initPorts()
         
-        
     def resetSimulation(self):
         self.simulatedInletVoltage = 0.0 # volts
         self.simulatedSoc = 20.0 # percent
@@ -163,7 +238,7 @@ class hardwareInterface():
         if (self.isSerialInterfaceOk):        
             self.ser.close()
 
-    def evaluateReceivedData(self, s):
+    def evaluateReceivedData_dieter(self, s):
         self.rxbuffer += s
         x=self.rxbuffer.find("A0=")
         if (x>=0):
@@ -179,11 +254,76 @@ class hardwareInterface():
                 #self.addToTrace("RX data ok " + s)
                 self.rxbuffer = self.rxbuffer[x+3:] # consume the receive buffer entry
 
+    def evaluateReceivedData_celeron55device(self, s):
+        self.rxbuffer += s
+        while True:
+            x = self.rxbuffer.find("\n")
+            if x < 0:
+                break
+            line = self.rxbuffer[0:x].strip()
+            self.rxbuffer = self.rxbuffer[x+1:]
+            #self.addToTrace("Received line: \""+line+"\"")
+            if line.startswith("inlet_v="):
+                self.inletVoltage = int(line[8:])
+                if self.logged_inlet_voltage != self.inletVoltage:
+                    self.logged_inlet_voltage = self.inletVoltage
+                    self.addToTrace("<< inlet_voltage="+str(self.inletVoltage))
+                if self.callbackShowStatus:
+                    self.callbackShowStatus(format(self.inletVoltage,".1f"), "uInlet")
+            elif line.startswith("dc_link_v="):
+                self.accuVoltage = int(line[10:])
+                if self.logged_dc_link_voltage != self.accuVoltage:
+                    self.logged_dc_link_voltage = self.accuVoltage
+                    self.addToTrace("<< dc_link_voltage="+str(self.accuVoltage))
+            elif line.startswith("cp_pwm="):
+                self.cp_pwm = int(line[7:])
+                if self.logged_cp_pwm != self.cp_pwm:
+                    self.logged_cp_pwm = self.cp_pwm
+                    self.addToTrace("<< cp_pwm="+str(self.cp_pwm))
+            elif line.startswith("cp_output_state="):
+                state = int(line[len("cp_output_state="):])
+                if bool(state) == ((self.outvalue & 1)!=0):
+                    self.addToTrace("<< CP state confirmed")
+                else:
+                    self.addToTrace("<< CP state MISMATCH")
+            elif line.startswith("ccs_contactor_wanted_closed="):
+                state = int(line[len("ccs_contactor_wanted_closed="):])
+                if bool(state) == ((self.outvalue & 2)!=0):
+                    self.addToTrace("<< Contactor request confirmed")
+                else:
+                    self.addToTrace("<< Contactor request MISMATCH")
+            elif line.startswith("max_charge_a="):
+                self.accuMaxCurrent = int(line[13:])
+                if self.logged_max_charge_a != self.accuMaxCurrent:
+                    self.logged_max_charge_a = self.accuMaxCurrent
+                    self.addToTrace("<< max_charge_a="+str(self.accuMaxCurrent))
+            elif line.startswith("soc_percent="):
+                self.soc_percent = int(line[12:])
+                if self.logged_soc_percent != self.soc_percent:
+                    self.logged_soc_percent = self.soc_percent
+                    self.addToTrace("<< soc_percent="+str(self.soc_percent))
+            elif line.startswith("contactor_confirmed="):
+                self.contactor_confirmed = bool(int(line[20:]))
+                if self.logged_contactor_confirmed != self.contactor_confirmed:
+                    self.logged_contactor_confirmed = self.contactor_confirmed
+                    self.addToTrace("<< contactor_confirmed="+str(self.contactor_confirmed))
+            elif line.startswith("plugged_in="):
+                self.plugged_in = bool(int(line[11:]))
+                if self.logged_plugged_in != self.plugged_in:
+                    self.logged_plugged_in = self.plugged_in
+                    self.addToTrace("<< plugged_in="+str(self.plugged_in))
+            else:
+                self.addToTrace("Received unknown line: \""+line+"\"")
+
     def showOnDisplay(self, s1, s2, s3):
         # show the given string s on the display which is connected to the serial port
         if (getConfigValueBool("display_via_serial") and self.isSerialInterfaceOk):
-            s = "lc" + s1 + "\n" + "lc" + s2 + "\n" + "lc" + s3 + "\n"
+            if (getConfigValue("digital_output_device")=="celeron55device"):
-            self.ser.write(bytes(s, "utf-8"))
+                s = "disp0=" + s1 + "\n" + "disp1=" + s2 + "\n" + "disp2=" + s3 + "\n"
+                self.ser.write(bytes(s, "utf-8"))
+            else:
+                s = "lc" + s1 + "\n" + "lc" + s2 + "\n" + "lc" + s3 + "\n"
+                self.ser.write(bytes(s, "utf-8"))
         
     def mainfunction(self):
         if (getConfigValueBool("soc_simulation")):
@@ -192,7 +332,20 @@ class hardwareInterface():
                     # while the relay is closed, simulate increasing SOC
                     self.simulatedSoc = self.simulatedSoc + 0.01
                 
+        if (getConfigValue("digital_output_device")=="dieter"):
+            self.mainfunction_dieter()
 
+        if (getConfigValue("digital_output_device")=="celeron55device"):
+            self.mainfunction_celeron55device()
+
+        if getConfigValueBool("exit_on_session_end"):
+            # TODO: This is a hack. Do this in fsmPev instead and publish some
+            # of these values into there if needed.
+            if (self.plugged_in is not None and self.plugged_in == False and
+                    self.inletVoltage < 50):
+                sys.exit(0)
+
+    def mainfunction_dieter(self):
         self.loopcounter+=1
         if (self.isSerialInterfaceOk):
             if (self.loopcounter>15):
@@ -207,7 +360,18 @@ class hardwareInterface():
                 except:
                     s = "" # for the case we received corrupted data (not convertable as utf-8)
                 self.addToTrace(str(len(s)) + " bytes received: " + s)
-                self.evaluateReceivedData(s)
+                self.evaluateReceivedData_dieter(s)
+
+    def mainfunction_celeron55device(self):
+        if (self.isSerialInterfaceOk):
+            s = self.ser.read(100)
+            if (len(s)>0):
+                try:
+                    s = str(s, 'utf-8')
+                except:
+                    s = "" # for the case we received corrupted data (not convertable as utf-8)
+                #self.addToTrace(str(len(s)) + " bytes received: " + s)
+                self.evaluateReceivedData_celeron55device(s)
         
 def myPrintfunction(s):
     print("myprint " + s)