mirror of
https://github.com/uhi22/pyPLC.git
synced 2024-11-10 01:05:42 +00:00
setkey and getkey are working
This commit is contained in:
parent
5021309a72
commit
c51a5b6691
3 changed files with 299 additions and 41 deletions
BIN
PLC_on_Windows_and_raspberry.docx
Normal file
BIN
PLC_on_Windows_and_raspberry.docx
Normal file
Binary file not shown.
327
pyPlcHomeplug.py
327
pyPlcHomeplug.py
|
@ -7,6 +7,26 @@
|
||||||
# - Sniffing of the SLAC-request ok
|
# - Sniffing of the SLAC-request ok
|
||||||
# - Transmission of a demo message ok
|
# - Transmission of a demo message ok
|
||||||
#
|
#
|
||||||
|
# Test results 2022-10-15
|
||||||
|
# 1. GET_SW.REQ broadcast is answered by both TPlinks, while the first is connected to eth, the other via PLC at the first.
|
||||||
|
# 2. Step 1 works also, if we use a different MAC address than the original laptop ethernet MAC.
|
||||||
|
# 3. CM_SET_KEY addressed to the correct destination works, with the following results:
|
||||||
|
# - there were cases, when the TPlink responded "negative", but with a "valid" none (each time it used a new mynonce, and correctly
|
||||||
|
# reflected our mynonce.
|
||||||
|
# - but also there is "positive" response, also with correct nonces.
|
||||||
|
# - also the Devolo reponds positive and with correct nonces.
|
||||||
|
# - not yet checked, whether the NMK is really set
|
||||||
|
# 4. CM_GET_KEY with wrong NID is refused by the devolo. But at least it delivers the NID (e.g. d57c1fe9544e01), and if we use this NID in the next
|
||||||
|
# request, it responds with KEY_GRANTED, Keytype=NMK, and a key 7f19ba0261892d59b7ea42aed875d2320000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
|
||||||
|
# This key delivers exactly the NMK, which we have set in the CM_SET_KEY.
|
||||||
|
# But: There are some pitfalls:
|
||||||
|
# The CM_SET_KEY responds in some cases (wrong request) positive, but does not apply the NMK.
|
||||||
|
# If the CM_SET_KEY is well-formatted, including the correct NID, we get a false-negative response, and
|
||||||
|
# we see the LEDs on the adaptor shortly going completely off, completely on, and back to normal state. This
|
||||||
|
# is the sign, that the new key was accepted. It means, the
|
||||||
|
# adaptor is making a reset, to apply the new key.
|
||||||
|
# 5. CM_SET_KEY and CM_GET_KEY works also when sent to broadcast address.
|
||||||
|
|
||||||
import pcap
|
import pcap
|
||||||
|
|
||||||
def twoCharHex(b):
|
def twoCharHex(b):
|
||||||
|
@ -20,6 +40,48 @@ def showAsHex(mybytearray):
|
||||||
strHex = strHex + twoCharHex(mybytearray[i]) + " "
|
strHex = strHex + twoCharHex(mybytearray[i]) + " "
|
||||||
print("len " + str(packetlength) + " data " + strHex)
|
print("len " + str(packetlength) + " data " + strHex)
|
||||||
|
|
||||||
|
MAC_BROADCAST = [0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF ]
|
||||||
|
MAC_LAPTOP = [0xdc, 0x0e, 0xa1, 0x11, 0x67, 0x08 ]
|
||||||
|
MAC_RANDOM = [0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff ]
|
||||||
|
MAC_IONIQ = [0x04, 0x65, 0x65, 0x00, 0x64, 0xC3 ]
|
||||||
|
MAC_ALPI = [0x0A, 0x19, 0x4A, 0x39, 0xD6, 0x98 ] # alpitronics
|
||||||
|
MAC_TPLINK_E4 = [0x98, 0x48, 0x27, 0x5A, 0x3C, 0xE4 ] # TPlink PLC adaptor
|
||||||
|
MAC_TPLINK_E6 = [0x98, 0x48, 0x27, 0x5A, 0x3C, 0xE6 ] # TPlink PLC adaptor
|
||||||
|
MAC_DEVOLO_26 = [0xBC, 0xF2, 0xAF, 0x0B, 0x8E, 0x26 ] # Devolo PLC adaptor
|
||||||
|
|
||||||
|
|
||||||
|
CM_SET_KEY = 0x6008
|
||||||
|
CM_GET_KEY = 0x600C
|
||||||
|
CM_SC_JOIN = 0x6010
|
||||||
|
CM_CHAN_EST = 0x6014
|
||||||
|
CM_TM_UPDATE = 0x6018
|
||||||
|
CM_AMP_MAP = 0x601C
|
||||||
|
CM_BRG_INFO = 0x6020
|
||||||
|
CM_CONN_NEW = 0x6024
|
||||||
|
CM_CONN_REL = 0x6028
|
||||||
|
CM_CONN_MOD = 0x602C
|
||||||
|
CM_CONN_INFO = 0x6030
|
||||||
|
CM_STA_CAP = 0x6034
|
||||||
|
CM_NW_INFO = 0x6038
|
||||||
|
CM_GET_BEACON = 0x603C
|
||||||
|
CM_HFID = 0x6040
|
||||||
|
CM_MME_ERROR = 0x6044
|
||||||
|
CM_NW_STATS = 0x6048
|
||||||
|
CM_SLAC_PARAM = 0x6064
|
||||||
|
CM_START_ATTEN_CHAR = 0x6068
|
||||||
|
CM_ATTEN_CHAR = 0x606C
|
||||||
|
CM_PKCS_CERT = 0x6070
|
||||||
|
CM_MNBC_SOUND = 0x6074
|
||||||
|
CM_VALIDATE = 0x6078
|
||||||
|
CM_SLAC_MATCH = 0x607C
|
||||||
|
CM_SLAC_USER_DATA = 0x6080
|
||||||
|
CM_ATTEN_PROFILE = 0x6084
|
||||||
|
|
||||||
|
MMTYPE_REQ = 0x0000
|
||||||
|
MMTYPE_CNF = 0x0001
|
||||||
|
MMTYPE_IND = 0x0002
|
||||||
|
MMTYPE_RSP = 0x0003
|
||||||
|
|
||||||
|
|
||||||
class pyPlcHomeplug():
|
class pyPlcHomeplug():
|
||||||
def showIpAddresses(self, mybytearray):
|
def showIpAddresses(self, mybytearray):
|
||||||
|
@ -51,24 +113,150 @@ class pyPlcHomeplug():
|
||||||
print("HomePlug protocol")
|
print("HomePlug protocol")
|
||||||
return blIsHomePlug
|
return blIsHomePlug
|
||||||
|
|
||||||
|
def fillSourceMac(self, mac):
|
||||||
|
self.mytransmitbuffer[6]=mac[0]
|
||||||
|
self.mytransmitbuffer[7]=mac[1]
|
||||||
|
self.mytransmitbuffer[8]=mac[2]
|
||||||
|
self.mytransmitbuffer[9]=mac[3]
|
||||||
|
self.mytransmitbuffer[10]=mac[4]
|
||||||
|
self.mytransmitbuffer[11]=mac[5]
|
||||||
|
|
||||||
|
def fillDestinationMac(self, mac):
|
||||||
|
self.mytransmitbuffer[0]=mac[0]
|
||||||
|
self.mytransmitbuffer[1]=mac[1]
|
||||||
|
self.mytransmitbuffer[2]=mac[2]
|
||||||
|
self.mytransmitbuffer[3]=mac[3]
|
||||||
|
self.mytransmitbuffer[4]=mac[4]
|
||||||
|
self.mytransmitbuffer[5]=mac[5]
|
||||||
|
|
||||||
|
def cleanTransmitBuffer(self):
|
||||||
|
for i in range(0, len(self.mytransmitbuffer)):
|
||||||
|
self.mytransmitbuffer[i]=0
|
||||||
|
|
||||||
|
def setNwkAt(self, index):
|
||||||
|
# sets the Network Key (NMK) at a certain position in the transmit buffer
|
||||||
|
for i in range(0, 16):
|
||||||
|
self.mytransmitbuffer[index+i]=self.NWK[i] # NWK
|
||||||
|
|
||||||
|
def setNidAt(self, index):
|
||||||
|
# (b0f2e695666b03 was NID of TPlink)
|
||||||
|
# copies the network ID (NID) into the wished position in the transmit buffer
|
||||||
|
for i in range(0, 7):
|
||||||
|
self.mytransmitbuffer[index+i]=self.NID[i]
|
||||||
|
|
||||||
|
def getManagementMessageType(self):
|
||||||
|
# calculates the MMTYPE (base value + lower two bits), see Table 11-2 of homeplug spec
|
||||||
|
return (self.myreceivebuffer[16]<<8) + self.myreceivebuffer[15]
|
||||||
|
|
||||||
|
def composeTestFrameGetSwReq(self):
|
||||||
|
# GET_SW.REQ request, as used by the win10 laptop
|
||||||
|
self.mytransmitbuffer = bytearray(60)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
|
# Destination MAC
|
||||||
|
self.fillDestinationMac(MAC_BROADCAST)
|
||||||
|
# Source MAC
|
||||||
|
self.fillSourceMac(MAC_RANDOM)
|
||||||
|
# Protocol
|
||||||
|
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
||||||
|
self.mytransmitbuffer[13]=0xE1
|
||||||
|
self.mytransmitbuffer[14]=0x00 # version
|
||||||
|
self.mytransmitbuffer[15]=0x00 # GET_SW.REQ
|
||||||
|
self.mytransmitbuffer[16]=0xA0 #
|
||||||
|
self.mytransmitbuffer[17]=0x00 # Vendor OUI
|
||||||
|
self.mytransmitbuffer[18]=0xB0 #
|
||||||
|
self.mytransmitbuffer[19]=0x52 #
|
||||||
|
|
||||||
|
def composeTestFrameSetKey(self, variation=0):
|
||||||
|
# CM_SET_KEY.REQ request
|
||||||
|
# From example trace from catphish https://openinverter.org/forum/viewtopic.php?p=40558&sid=9c23d8c3842e95c4cf42173996803241#p40558
|
||||||
|
# Table 11-88 in the homeplug_av21_specification_final_public.pdf
|
||||||
|
self.mytransmitbuffer = bytearray(60)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
|
# Destination MAC
|
||||||
|
#self.fillDestinationMac(MAC_DEVOLO_26)
|
||||||
|
#self.fillDestinationMac(MAC_TPLINK_E4)
|
||||||
|
self.fillDestinationMac(MAC_BROADCAST)
|
||||||
|
# Source MAC
|
||||||
|
#self.fillSourceMac(MAC_LAPTOP)
|
||||||
|
self.fillSourceMac(MAC_RANDOM)
|
||||||
|
# Protocol
|
||||||
|
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
||||||
|
self.mytransmitbuffer[13]=0xE1
|
||||||
|
self.mytransmitbuffer[14]=0x01 # version
|
||||||
|
self.mytransmitbuffer[15]=0x08 # CM_SET_KEY.REQ
|
||||||
|
self.mytransmitbuffer[16]=0x60 #
|
||||||
|
self.mytransmitbuffer[17]=0x00 # frag_index
|
||||||
|
self.mytransmitbuffer[18]=0x00 # frag_seqnum
|
||||||
|
self.mytransmitbuffer[19]=0x01 # 0 key info type
|
||||||
|
|
||||||
|
self.mytransmitbuffer[20]=0xaa # 1 my nonce
|
||||||
|
self.mytransmitbuffer[21]=0xaa # 2
|
||||||
|
self.mytransmitbuffer[22]=0xaa # 3
|
||||||
|
self.mytransmitbuffer[23]=0xaa # 4
|
||||||
|
|
||||||
|
self.mytransmitbuffer[24]=0x00 # 5 your nonce
|
||||||
|
self.mytransmitbuffer[25]=0x00 # 6
|
||||||
|
self.mytransmitbuffer[26]=0x00 # 7
|
||||||
|
self.mytransmitbuffer[27]=0x00 # 8
|
||||||
|
|
||||||
|
self.mytransmitbuffer[28]=0x04 # 9 nw info pid
|
||||||
|
|
||||||
|
self.mytransmitbuffer[29]=0x00 # 10 info prn
|
||||||
|
self.mytransmitbuffer[30]=0x00 # 11
|
||||||
|
self.mytransmitbuffer[31]=0x00 # 12 pmn
|
||||||
|
self.mytransmitbuffer[32]=0x00 # 13 cco cap
|
||||||
|
#self.setNidAt(33) # 14-20 nid 7 bytes from 33 to 39
|
||||||
|
self.mytransmitbuffer[40]=0x01 # 21 peks (payload encryption key select) Table 11-83. 01 is NMK. We had 02 here, why???
|
||||||
|
# with 0x0F we could choose "no key, payload is sent in the clear"
|
||||||
|
self.setNwkAt(41)
|
||||||
|
self.mytransmitbuffer[41]+=variation # to try different NMKs
|
||||||
|
# and three remaining zeros
|
||||||
|
|
||||||
|
def composeTestFrameGetKey(self):
|
||||||
|
# CM_GET_KEY.REQ request
|
||||||
|
# from https://github.com/uhi22/plctool2/blob/master/listen_to_eth.c
|
||||||
|
# and homeplug_av21_specification_final_public.pdf
|
||||||
|
self.mytransmitbuffer = bytearray(60)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
|
# Destination MAC
|
||||||
|
#self.fillDestinationMac(MAC_DEVOLO_26)
|
||||||
|
#self.fillDestinationMac(MAC_TPLINK_E4)
|
||||||
|
self.fillDestinationMac(MAC_BROADCAST)
|
||||||
|
# Source MAC
|
||||||
|
#self.fillSourceMac(MAC_LAPTOP)
|
||||||
|
self.fillSourceMac(MAC_RANDOM)
|
||||||
|
# Protocol
|
||||||
|
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
||||||
|
self.mytransmitbuffer[13]=0xE1
|
||||||
|
self.mytransmitbuffer[14]=0x01 # version
|
||||||
|
self.mytransmitbuffer[15]=0x0C # CM_GET_KEY.REQ https://github.com/uhi22/plctool2/blob/master/plc_homeplug.h
|
||||||
|
self.mytransmitbuffer[16]=0x60 #
|
||||||
|
self.mytransmitbuffer[17]=0x00 # 2 bytes fragmentation information. 0000 means: unfragmented.
|
||||||
|
self.mytransmitbuffer[18]=0x00 #
|
||||||
|
|
||||||
|
self.mytransmitbuffer[19]=0x00 # 0 Request Type 0=direct
|
||||||
|
self.mytransmitbuffer[20]=0x01 # 1 RequestedKeyType only "NMK" is permitted over the H1 interface.
|
||||||
|
# value see HomeplugAV2.1 spec table 11-89. 1 means AES-128.
|
||||||
|
|
||||||
|
self.setNidAt(21)# NID starts here (table 11-91 Homeplug spec is wrong. Verified by accepted command.)
|
||||||
|
self.mytransmitbuffer[28]=0xaa # 10-13 mynonce. The position at 28 is verified by the response of the devolo.
|
||||||
|
self.mytransmitbuffer[29]=0xaa #
|
||||||
|
self.mytransmitbuffer[30]=0xaa #
|
||||||
|
self.mytransmitbuffer[31]=0xaa #
|
||||||
|
self.mytransmitbuffer[32]=0x04 # 14 PID. According to ISO15118-3 fix value 4, "HLE protocol"
|
||||||
|
self.mytransmitbuffer[33]=0x00 # 15-16 PRN Protocol run number
|
||||||
|
self.mytransmitbuffer[34]=0x00 #
|
||||||
|
self.mytransmitbuffer[35]=0x00 # 17 PMN Protocol message number
|
||||||
|
|
||||||
def composeTestFrameSlacReq(self):
|
def composeTestFrameSlacReq(self):
|
||||||
# SLAC request, as it was recorded 2021-12-17 WP charger 2
|
# SLAC request, as it was recorded 2021-12-17 WP charger 2
|
||||||
self.mytransmitbuffer = bytearray(60)
|
self.mytransmitbuffer = bytearray(60)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
# Destination MAC
|
# Destination MAC
|
||||||
self.mytransmitbuffer[0]=0xFF
|
self.fillDestinationMac(MAC_BROADCAST)
|
||||||
self.mytransmitbuffer[1]=0xFF
|
|
||||||
self.mytransmitbuffer[2]=0xFF
|
|
||||||
self.mytransmitbuffer[3]=0xFF
|
|
||||||
self.mytransmitbuffer[4]=0xFF
|
|
||||||
self.mytransmitbuffer[5]=0xFF
|
|
||||||
|
|
||||||
# Source MAC
|
# Source MAC
|
||||||
self.mytransmitbuffer[6]=0x04 # Ioniq MAC
|
self.fillSourceMac(MAC_IONIQ)
|
||||||
self.mytransmitbuffer[7]=0x65
|
|
||||||
self.mytransmitbuffer[8]=0x65
|
|
||||||
self.mytransmitbuffer[9]=0x00
|
|
||||||
self.mytransmitbuffer[10]=0x64
|
|
||||||
self.mytransmitbuffer[11]=0xC3
|
|
||||||
|
|
||||||
# Protocol
|
# Protocol
|
||||||
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
||||||
|
@ -125,21 +313,12 @@ class pyPlcHomeplug():
|
||||||
|
|
||||||
def composeTestFrameSlacResp(self):
|
def composeTestFrameSlacResp(self):
|
||||||
self.mytransmitbuffer = bytearray(60)
|
self.mytransmitbuffer = bytearray(60)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
# Destination MAC
|
# Destination MAC
|
||||||
self.mytransmitbuffer[0]=0x04 # Ioniq MAC
|
self.fillDestinationMac(MAC_IONIQ)
|
||||||
self.mytransmitbuffer[1]=0x65
|
|
||||||
self.mytransmitbuffer[2]=0x65
|
|
||||||
self.mytransmitbuffer[3]=0x00
|
|
||||||
self.mytransmitbuffer[4]=0x64
|
|
||||||
self.mytransmitbuffer[5]=0xC3
|
|
||||||
|
|
||||||
# Source MAC
|
# Source MAC
|
||||||
self.mytransmitbuffer[6]=0x0A # Alpi MAC
|
self.fillSourceMac(MAC_ALPI)
|
||||||
self.mytransmitbuffer[7]=0x19
|
|
||||||
self.mytransmitbuffer[8]=0x4A
|
|
||||||
self.mytransmitbuffer[9]=0x39
|
|
||||||
self.mytransmitbuffer[10]=0xD6
|
|
||||||
self.mytransmitbuffer[11]=0x98
|
|
||||||
|
|
||||||
# Protocol
|
# Protocol
|
||||||
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
self.mytransmitbuffer[12]=0x88 # Protocol HomeplugAV
|
||||||
|
@ -195,10 +374,93 @@ class pyPlcHomeplug():
|
||||||
self.mytransmitbuffer[58]=0x0 #
|
self.mytransmitbuffer[58]=0x0 #
|
||||||
self.mytransmitbuffer[59]=0x0 #
|
self.mytransmitbuffer[59]=0x0 #
|
||||||
|
|
||||||
def sendTestFrame(self):
|
def composeTestFrameDHCP(self):
|
||||||
self.addToTrace("transmitting test frame...")
|
# DHCP discover, to check whether this "normal" package arrives on the other side
|
||||||
|
self.mytransmitbuffer = bytearray(379)
|
||||||
|
self.cleanTransmitBuffer()
|
||||||
|
# Destination MAC
|
||||||
|
self.fillDestinationMac(MAC_BROADCAST)
|
||||||
|
# Source MAC
|
||||||
|
self.fillSourceMac(MAC_LAPTOP)
|
||||||
|
self.mytransmitbuffer[12]=0x08 # Protocol IPv4
|
||||||
|
self.mytransmitbuffer[13]=0x00
|
||||||
|
self.mytransmitbuffer[14]=0x45 # header len
|
||||||
|
self.mytransmitbuffer[15]=0x00 #
|
||||||
|
self.mytransmitbuffer[16]=0x01 #
|
||||||
|
self.mytransmitbuffer[17]=0x6D #
|
||||||
|
self.mytransmitbuffer[18]=0x9B #
|
||||||
|
self.mytransmitbuffer[19]=0x30 #
|
||||||
|
self.mytransmitbuffer[20]=0x00 #
|
||||||
|
self.mytransmitbuffer[21]=0x00 #
|
||||||
|
self.mytransmitbuffer[22]=0x40 #
|
||||||
|
self.mytransmitbuffer[23]=0x11 #
|
||||||
|
self.mytransmitbuffer[24]=0xde #
|
||||||
|
self.mytransmitbuffer[25]=0x50 #
|
||||||
|
self.mytransmitbuffer[26]=0x00 #
|
||||||
|
self.mytransmitbuffer[27]=0x00 #
|
||||||
|
self.mytransmitbuffer[28]=0x00 #
|
||||||
|
self.mytransmitbuffer[29]=0x00 #
|
||||||
|
|
||||||
|
self.mytransmitbuffer[30]=0xFF #
|
||||||
|
self.mytransmitbuffer[31]=0xFF #
|
||||||
|
self.mytransmitbuffer[32]=0xFF #
|
||||||
|
self.mytransmitbuffer[33]=0xFF #
|
||||||
|
|
||||||
|
self.mytransmitbuffer[34]=0x00 #
|
||||||
|
self.mytransmitbuffer[35]=0x44 #
|
||||||
|
|
||||||
|
self.mytransmitbuffer[36]=0x00 #
|
||||||
|
self.mytransmitbuffer[37]=0x43 #
|
||||||
|
|
||||||
|
|
||||||
|
def sendTestFrame(self, selection):
|
||||||
|
|
||||||
|
if (selection=="1"):
|
||||||
self.composeTestFrameSlacReq()
|
self.composeTestFrameSlacReq()
|
||||||
|
self.addToTrace("transmitting TestFrame SlacReq...")
|
||||||
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="2"):
|
||||||
|
self.composeTestFrameSlacResp()
|
||||||
|
self.addToTrace("transmitting TestFrame SlacResp...")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="S"):
|
||||||
|
self.composeTestFrameGetSwReq()
|
||||||
|
self.addToTrace("transmitting TestFrame GetSwReq...")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="s"):
|
||||||
|
self.composeTestFrameSetKey(1)
|
||||||
|
self.addToTrace("transmitting TestFrame SET_KEY.REQ (key 1)")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="t"):
|
||||||
|
self.composeTestFrameSetKey(2)
|
||||||
|
self.addToTrace("transmitting TestFrame SET_KEY.REQ (key 2)")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="D"):
|
||||||
|
self.composeTestFrameDHCP()
|
||||||
|
self.addToTrace("transmitting TestFrame broken DHCP")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
if (selection=="G"):
|
||||||
|
self.composeTestFrameGetKey()
|
||||||
|
self.addToTrace("transmitting TestFrame GET_KEY")
|
||||||
|
self.sniffer.sendpacket(bytes(self.mytransmitbuffer))
|
||||||
|
|
||||||
|
def evaluateGetKeyCnf(self):
|
||||||
|
# The getkey response contains the Network ID (NID), even if the request was rejected. We store the NID,
|
||||||
|
# to have it available for the next request.
|
||||||
|
s = ""
|
||||||
|
for i in range(0, 7):
|
||||||
|
self.NID[i] = self.myreceivebuffer[29+i]
|
||||||
|
s=s+hex(self.NID[i])+ " "
|
||||||
|
print("From GetKeyCnf, got network ID (NID) " + s)
|
||||||
|
|
||||||
|
|
||||||
|
def evaluateReceivedHomeplugPacket(self):
|
||||||
|
mmt = self.getManagementMessageType()
|
||||||
|
print(hex(mmt))
|
||||||
|
if (mmt == CM_GET_KEY + MMTYPE_CNF):
|
||||||
|
self.evaluateGetKeyCnf()
|
||||||
|
|
||||||
|
#if (pkt[15]==0x64): #SLAC_Request
|
||||||
|
|
||||||
def findEthernetAdaptor(self):
|
def findEthernetAdaptor(self):
|
||||||
self.strInterfaceName="eth0" # default, if the real is not found
|
self.strInterfaceName="eth0" # default, if the real is not found
|
||||||
|
@ -233,6 +495,9 @@ class pyPlcHomeplug():
|
||||||
self.findEthernetAdaptor()
|
self.findEthernetAdaptor()
|
||||||
self.sniffer = pcap.pcap(name=self.strInterfaceName, promisc=True, immediate=True, timeout_ms=50)
|
self.sniffer = pcap.pcap(name=self.strInterfaceName, promisc=True, immediate=True, timeout_ms=50)
|
||||||
self.sniffer.setnonblock(True)
|
self.sniffer.setnonblock(True)
|
||||||
|
self.NWK = [ 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16 ] # a default network key
|
||||||
|
self.NID = [ 1, 2, 3, 4, 5, 6, 7 ] # a default network ID
|
||||||
|
self.runningCounter=0
|
||||||
print("sniffer created at " + self.strInterfaceName)
|
print("sniffer created at " + self.strInterfaceName)
|
||||||
|
|
||||||
def addToTrace(self, s):
|
def addToTrace(self, s):
|
||||||
|
@ -246,14 +511,10 @@ class pyPlcHomeplug():
|
||||||
for ts, pkt in self.sniffer: # attention: for using this in non-blocking manner, we need the patch described above.
|
for ts, pkt in self.sniffer: # attention: for using this in non-blocking manner, we need the patch described above.
|
||||||
self.nPacketsReceived+=1
|
self.nPacketsReceived+=1
|
||||||
print('%d' % (ts))
|
print('%d' % (ts))
|
||||||
#if (self.isHomeplug(pkt)):
|
if (self.isHomeplug(pkt)):
|
||||||
|
self.myreceivebuffer = pkt
|
||||||
# self.showMacAddresses(pkt)
|
# self.showMacAddresses(pkt)
|
||||||
# showAsHex(pkt)
|
self.evaluateReceivedHomeplugPacket()
|
||||||
# if (pkt[15]==0x64): #SLAC_Request
|
|
||||||
# self.sendTestFrame()
|
|
||||||
#
|
|
||||||
#else:
|
|
||||||
# addToTrace("(other)")
|
|
||||||
self.showStatus("nPacketsReceived=" + str(self.nPacketsReceived))
|
self.showStatus("nPacketsReceived=" + str(self.nPacketsReceived))
|
||||||
|
|
||||||
def close(self):
|
def close(self):
|
||||||
|
|
|
@ -9,7 +9,6 @@ import pyPlcHomeplug
|
||||||
class pyPlcWorker():
|
class pyPlcWorker():
|
||||||
def __init__(self, callbackAddToTrace=None, callbackShowStatus=None):
|
def __init__(self, callbackAddToTrace=None, callbackShowStatus=None):
|
||||||
print("initializing pyPlcWorker")
|
print("initializing pyPlcWorker")
|
||||||
self.something = "Hallo das ist ein Test"
|
|
||||||
self.nMainFunctionCalls=0
|
self.nMainFunctionCalls=0
|
||||||
self.strUserAction = ""
|
self.strUserAction = ""
|
||||||
self.callbackAddToTrace = callbackAddToTrace
|
self.callbackAddToTrace = callbackAddToTrace
|
||||||
|
@ -30,7 +29,5 @@ class pyPlcWorker():
|
||||||
def handleUserAction(self, strAction):
|
def handleUserAction(self, strAction):
|
||||||
self.strUserAction = strAction
|
self.strUserAction = strAction
|
||||||
self.addToTrace("UserAction " + strAction)
|
self.addToTrace("UserAction " + strAction)
|
||||||
if (strAction == "t"):
|
self.hp.sendTestFrame(strAction)
|
||||||
self.addToTrace("sending test frame")
|
|
||||||
self.hp.sendTestFrame()
|
|
||||||
|
|
||||||
|
|
Loading…
Reference in a new issue