From f3e92101374b05af7fbf5f688ae11a5f09ad2b09 Mon Sep 17 00:00:00 2001 From: uhi22 Date: Fri, 3 Mar 2023 12:52:18 +0100 Subject: [PATCH] docu: v0.6 tea-time on alpi --- readme.md | 18 +++++++++++------- 1 file changed, 11 insertions(+), 7 deletions(-) diff --git a/readme.md b/readme.md index b7423ba..5b61fd7 100644 --- a/readme.md +++ b/readme.md @@ -1,4 +1,4 @@ -# CCS sniffing: Some try-outs with Python and network adaptor low-level communication +# CCS hacking: Electric car charging experiments with Python and PLC network adaptors ## Goal This project tries to use cheap powerline network adaptors for communication with electric cars charging system. @@ -10,12 +10,12 @@ In this project, we call this mode *ListenMode*. 3. Building a charging unit for a car which does not support powerline communication. Let's call it *PevMode*. ## References -* [i] https://www.goingelectric.de/wiki/CCS-Technische-Details/ -* [ii] https://openinverter.org/forum/viewtopic.php?p=37085#p37085 -* [iii] https://github.com/qca/open-plc-utils -* [iv] https://github.com/karpierz/pcap-ct -* [v] https://github.com/FlUxIuS/V2Gdecoder -* [vi] https://github.com/SwitchEV/iso15118 +* [i] https://www.goingelectric.de/wiki/CCS-Technische-Details/ knowledge collection +* [ii] https://openinverter.org/forum/viewtopic.php?p=37085#p37085 discussion of this project +* [iii] https://github.com/qca/open-plc-utils utilities for configuring the PLC adaptor +* [iv] https://github.com/karpierz/pcap-ct library for low-level-network-access +* [v] https://github.com/FlUxIuS/V2Gdecoder demo for EXI decoder +* [vi] https://github.com/SwitchEV/iso15118 another "nearly" open source CCS project * [vii] https://books.google.de/books?id=WYlmEAAAQBAJ&pg=PA99&lpg=PA99&dq=%22ampsnif%22&source=bl&ots=hqCjdFooZ-&sig=ACfU3U0EleLZQu0zWhHQZGktp8OytCMrLg&hl=de&sa=X&ved=2ahUKEwjT0Yq88P36AhWj_rsIHeGMA5MQ6AF6BAgKEAM#v=onepage&q=%22ampsnif%22&f=false How to enable sniffer mode. * [viii] https://www.mdpi.com/2076-3417/6/6/165/htm "Building an Interoperability Test System for Electric Vehicle Chargers Based on ISO/IEC 15118 and IEC 61850 Standards", including V2G message sequence chart * [ix] https://www.oppcharge.org/dok/ISO_15118-2_OpportunityCharging_Rev1.3.0.pdf Pantograph specific differences with some insight into ISO15118. @@ -315,6 +315,10 @@ hardware side. Without the load, we see the intended 230V precharge voltage, and - Charging status is shown on OLED display. Details in [hardware.md](doc/hardware.md) - RaspberryPi 3 configured to auto-start the PEV software as service. Startup time around 21 seconds from power-up until the SLAC starts. Details in [installation_on_raspberry.md](doc/installation_on_raspberry.md) + +### 2023-03-03 v0.6 Tea-Time on Alpitronics charger +Made a tea, using the RaspberryPi3 and tpLink modem on Alpitronics hypercharger. + ### Test results on real-world chargers See [charger_test_results.md](doc/charger_test_results.md)