github-mirrors/pyPLC
1
0
Fork 0
mirror of https://github.com/uhi22/pyPLC.git synced 2024-11-20 01:13:58 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

docu: improved parameter description in ini template

Browse source
This commit is contained in:
uhi22 2023-07-05 09:16:29 +02:00
parent 5c44e17615
commit fac0145868
1 changed files with 10 additions and 2 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

12
doc/pyPlc.ini.template
View file

@ -11,7 +11,7 @@ mode = PevMode
# Simulation without modem # Simulation without modem
# For development purposes, make it possible to run two instances (pev and evse) on one machine, without # For development purposes, make it possible to run two instances (pev and evse) on one machine, without
# a modem connected. This feature is not tested since a long time, most likely does not work as intended. # a modem connected.
# If this setting is set to false, nevertheless the simulation mode can be activated by the second command # If this setting is set to false, nevertheless the simulation mode can be activated by the second command
# line parameter "S", e.g. # line parameter "S", e.g.
# python pyPlc.py E S # python pyPlc.py E S
@ -33,7 +33,10 @@ display_via_serial = yes
# LightBulbDemo turns on the relay with a short delay in the charging loop, to stabilize the voltage # LightBulbDemo turns on the relay with a short delay in the charging loop, to stabilize the voltage
# before the resistive load is connected. # before the resistive load is connected.
# This mode is intended to test the PevMode without the need of a real battery, but a load like a light bulb,
# or kettle or similar.
# Possible values: yes or no # Possible values: yes or no
# For the use together with a real battery set this to "no".
light_bulb_demo = no light_bulb_demo = no
# SOC simulation. # SOC simulation.
@ -95,7 +98,9 @@ charge_target_voltage = 270
# By using an external manager script, this is useful for splitting charging # By using an external manager script, this is useful for splitting charging
# into separately logged sessions and avoiding logging when not connected to a # into separately logged sessions and avoiding logging when not connected to a
# charger # charger.
# Recommended setting: True, and configure the starter.sh as service (Linux only).
# Deeper explanations here: https://github.com/uhi22/pyPLC/blob/master/doc/installation_on_raspberry.md#further-optimizations
exit_on_session_end = False exit_on_session_end = False
# Run test cases. # Run test cases.
@ -108,6 +113,9 @@ testsuite_enable = No
# Logging to UDP Syslog messages # Logging to UDP Syslog messages
# If this is activated, the pyPlc will send all logging messages also to the network interface, # If this is activated, the pyPlc will send all logging messages also to the network interface,
# in form of UDP Syslog messages. For details see in udplog.py. # in form of UDP Syslog messages. For details see in udplog.py.
# For development purposes, set this to "Yes".
# For daily use, set this to "No". There is the risk that the broadcase UDP packets disturb the charger,
# which may lead to unwanted aborts.
udp_syslog_enable = Yes udp_syslog_enable = Yes
# Set backend for obtaining charging parameters, we start with CHAdeMO CAN for now # Set backend for obtaining charging parameters, we start with CHAdeMO CAN for now