github-mirrors/pyPLC
1
0
Fork 0
mirror of https://github.com/uhi22/pyPLC.git synced 2024-09-11 00:38:29 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
pyPLC/hardware/plc_evse
History
uhi22 b2d6ec0928 docu: For EvseMode, added schematic, BOM and 3D model
2024-07-01 16:20:19 +02:00
..
mini-evse-housing.FCStd docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
mini-evse-housing.step docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
plc_evse.kicad_pcb docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
plc_evse.kicad_prl docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
plc_evse.kicad_pro docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
plc_evse.kicad_sch docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
plc_evse_schematic_v1.pdf docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00
readme.md docu: For EvseMode, added schematic, BOM and 3D model 2024-07-01 16:20:19 +02:00

readme.md

PLC EVSE

For use together with pyPLC.

This is a KiCad 8 project. Only the schematic, no board.

BOM

  • C1, C2, C3: elcap, 100µF, 25V
  • C20: ceramic, 1nF (something between 1nF and 2.2nF is fine)
  • U1: op-amp LF355
  • U2, U3: isolated DCDC converter, 5V to 12V, 1W, e.g. B0512S-1WR3
  • R1: 1k
  • R2: 270ohm
  • R5: 56k
  • R6: 100k
  • R7: 220k
  • R8, R9: 120k (does not really matter, also 100k would be fine)
  • R20: 180ohm (does not really matter. Something between 100ohm and 330ohm.)
  • D1, D2: LEDs WS2812B. Also one would be sufficient.
  • RV1: potentiometer e.g. 10k linear (also 1k or 22k would be fine)
  • A1: Arduino Nano
  • Prototyping board 100mm x 106mm
  • Housing 3D printed, FreeCad mini-evse-housing.FCStd, or step: mini-evse-housing.step
  • For power supply: USB A cable, cutted and soldered to the board.