mirror of
https://github.com/uhi22/pyPLC.git
synced 2024-11-10 01:05:42 +00:00
177 lines
8.3 KiB
Python
177 lines
8.3 KiB
Python
|
|
# pcap Converter
|
|
#
|
|
# This little helper tool reads a network trace (e.g. recorded with wireshark) and
|
|
# interprets the content of the EXI.V2GTP.TCP.IPv6 data.
|
|
#
|
|
# Preconditions:
|
|
# 1. You have a capture file with contains V2G traffic (pcap or pcapng file).
|
|
# 2. You installed the python library pyshark, according to https://github.com/KimiNewt/pyshark/
|
|
# pip install pyshark
|
|
# 3. You cloned and compiled the OpenV2Gx EXI decoder from https://github.com/uhi22/OpenV2Gx
|
|
#
|
|
# Limitations:
|
|
# - Only DIN is supported at the moment.
|
|
# - The script treats all V2G EXI messages as DIN messages. This means, the ApplHandshake messages at
|
|
# the begin of the charging session will lead to wrong or not decoded data.
|
|
# - The path where the script look for pcap files needs to be configured in the code.
|
|
#
|
|
# Possible improvements / Todos:
|
|
# - Show also the SLAC, NeigborDiscovery and SDP.
|
|
# - Add flexibility to also decode the ApplHandshake messages.
|
|
# - Add ISO support.
|
|
# - Configure the path where to look for pcap files via command line
|
|
#
|
|
|
|
import pyshark
|
|
import exiConnector
|
|
import os
|
|
from helpers import combineValueAndMultiplier
|
|
import json
|
|
|
|
# The path where the script will search for pcap files:
|
|
directory = '../temp/to_decode'
|
|
|
|
# stop the evaluation after this number of packets. Set to zero to have no limit.
|
|
nLimitNumberOfPackets = 1000
|
|
|
|
|
|
def getManufacturerFromMAC(strMAC):
|
|
# Examples based on https://macvendors.com/, and https://www.ipchecktool.com/tool/macfinder and own experience
|
|
if (strMAC[0:5]=="ec:a2"):
|
|
return "Kempower"
|
|
if (strMAC[0:8]=="dc:44:27"):
|
|
return "Tesla"
|
|
if (strMAC[0:8]=="ce:25:1a"):
|
|
return "Alpitronic"
|
|
if (strMAC[0:8]=="1a:a9:8e"):
|
|
return "Alpitronic"
|
|
if (strMAC[0:8]=="e8:eb:1b"):
|
|
return "Microchip (maybe ABB)"
|
|
if (strMAC[0:8]=="68:27:19"):
|
|
return "Microchip (maybe ABB)"
|
|
if (strMAC[0:8]=="80:1f:12"):
|
|
return "Microchip (maybe Compleo)"
|
|
if (strMAC[0:5]=="18:d7"):
|
|
return "(maybe Siemens)"
|
|
return "(unknown vendor)"
|
|
|
|
# Examples of the decoder result:
|
|
#"EVSEPresentVoltage.Multiplier": "0",
|
|
#"EVSEPresentVoltage.Value": "318",
|
|
#"EVSEPresentVoltage.Unit": "V",
|
|
#"DC_EVStatus.EVRESSSOC": "53",
|
|
|
|
def convertPcapToTxt(inputFileName):
|
|
global nLimitNumberOfPackets
|
|
global directory
|
|
cap = pyshark.FileCapture(inputFileName, display_filter="ipv6")
|
|
fileOut = open(inputFileName + '.decoded.txt', 'w')
|
|
print("# generated by pcapConverter.py", file=fileOut)
|
|
print("# https://github.com/uhi22/pyPLC", file=fileOut)
|
|
fileOutValues = open(inputFileName + '.values.txt', 'w')
|
|
print("# generated by pcapConverter.py", file=fileOutValues)
|
|
print("# https://github.com/uhi22/pyPLC", file=fileOutValues)
|
|
fileOutStatistics = open(directory + '/pcap_statistics.txt', 'a')
|
|
print("# statistics for " + inputFileName, file=fileOutStatistics)
|
|
# Example how to access the data:
|
|
#print(cap)
|
|
#print(cap[0])
|
|
#print(cap[1])
|
|
#print(dir(cap[1]))
|
|
#print(dir(cap[1].eth))
|
|
#print(cap[1].eth.src) # the source MAC address
|
|
#print(cap[1].sniff_time) # readable time
|
|
#print(cap[1].sniff_timestamp) # epoch time
|
|
t1CableCheckBegin = 0
|
|
t2PreChargeBegin = 0
|
|
t3CurrentDemandBegin = 0
|
|
numberOfPackets=0
|
|
for packet in cap:
|
|
numberOfPackets+=1
|
|
#print(packet)
|
|
if 'TCP' in packet:
|
|
#print(packet.tcp.field_names)
|
|
if ('payload' in packet.tcp.field_names):
|
|
tcppayload = packet.tcp.payload # this gives a string of hex values, separated by ":", e.g. "01:fe:80:01"
|
|
s = tcppayload.replace(":", "") # remove colons
|
|
if (s[0:8]=="01fe8001"):
|
|
# it is a V2GTP header with EXI content
|
|
strExi = s[16:] # remove V2GTP header (8 bytes, means 16 hex characters)
|
|
sHeader = "Packet #" + str(numberOfPackets) + " [" + str(packet.sniff_time) + "] " + strExi + " means:"
|
|
pre = "DD" # decode DIN
|
|
decoded=exiConnector.exiDecode(strExi, pre)
|
|
#print(sHeader)
|
|
#print(decoded)
|
|
print(sHeader, file=fileOut)
|
|
print(decoded, file=fileOut)
|
|
if (decoded.find("SessionSetupReq")>0):
|
|
if ((t1CableCheckBegin>0) and (t2PreChargeBegin>t1CableCheckBegin) and (t3CurrentDemandBegin>t2PreChargeBegin)):
|
|
print("charger MAC " + chargerMAC + " " + getManufacturerFromMAC(chargerMAC))
|
|
timeForCableCheck = t2PreChargeBegin - t1CableCheckBegin
|
|
timeForPreCharge = t3CurrentDemandBegin - t2PreChargeBegin
|
|
print("timeForCableCheck= " + ("%.3f" % timeForCableCheck))
|
|
print("timeForPreCharge= " + ("%.3f" % timeForPreCharge))
|
|
print(chargerMAC + ";" + getManufacturerFromMAC(chargerMAC) + ";" + \
|
|
"timeForCableCheck;" + ("%.3f" % timeForCableCheck) + ";" + \
|
|
"timeForPreCharge; " + ("%.3f" % timeForPreCharge), file=fileOutStatistics)
|
|
t1CableCheckBegin = 0
|
|
t2PreChargeBegin = 0
|
|
t3CurrentDemandBegin = 0
|
|
if (decoded.find("CableCheckReq")>0) and (t1CableCheckBegin==0):
|
|
t1CableCheckBegin = float(packet.sniff_timestamp)
|
|
chargerMAC = str(packet.eth.dst)
|
|
if (decoded.find("PreChargeReq")>0) and (t2PreChargeBegin==0):
|
|
t2PreChargeBegin = float(packet.sniff_timestamp)
|
|
if (decoded.find("CurrentDemandReq")>0) and (t3CurrentDemandBegin==0):
|
|
t3CurrentDemandBegin = float(packet.sniff_timestamp)
|
|
try:
|
|
y = json.loads(decoded)
|
|
try:
|
|
u = combineValueAndMultiplier(y["EVSEPresentVoltage.Value"], y["EVSEPresentVoltage.Multiplier"])
|
|
print("[" + str(packet.sniff_time) + "] EVSEPresentVoltage=" + str(u), file=fileOutValues)
|
|
i = combineValueAndMultiplier(y["EVSEPresentCurrent.Value"], y["EVSEPresentCurrent.Multiplier"])
|
|
print("[" + str(packet.sniff_time) + "] EVSEPresentCurrent=" + str(i), file=fileOutValues)
|
|
except:
|
|
pass
|
|
try:
|
|
soc = y["DC_EVStatus.EVRESSSOC"]
|
|
print("[" + str(packet.sniff_time) + "] EVRESSSOC=" + str(soc), file=fileOutValues)
|
|
except:
|
|
pass
|
|
except:
|
|
pass
|
|
if ((numberOfPackets % 100)==0):
|
|
print(str(numberOfPackets) + " packets")
|
|
if ((nLimitNumberOfPackets>0) and (numberOfPackets>=nLimitNumberOfPackets)):
|
|
break
|
|
# Statistics of the timing:
|
|
#print("t1CableCheckBegin " + str(t1CableCheckBegin))
|
|
#print("t2PreChargeBegin " + str(t2PreChargeBegin))
|
|
#print("t3CurrentDemandBegin " + str(t3CurrentDemandBegin))
|
|
if ((t1CableCheckBegin>0) and (t2PreChargeBegin>t1CableCheckBegin) and (t3CurrentDemandBegin>t2PreChargeBegin)):
|
|
print("charger MAC " + chargerMAC + " " + getManufacturerFromMAC(chargerMAC))
|
|
timeForCableCheck = t2PreChargeBegin - t1CableCheckBegin
|
|
timeForPreCharge = t3CurrentDemandBegin - t2PreChargeBegin
|
|
print("timeForCableCheck= " + ("%.3f" % timeForCableCheck))
|
|
print("timeForPreCharge= " + ("%.3f" % timeForPreCharge))
|
|
|
|
print(chargerMAC + ";" + getManufacturerFromMAC(chargerMAC) + ";" + \
|
|
"timeForCableCheck;" + ("%.3f" % timeForCableCheck) + ";" + \
|
|
"timeForPreCharge; " + ("%.3f" % timeForPreCharge), file=fileOutStatistics)
|
|
|
|
fileOutStatistics.close()
|
|
fileOut.close()
|
|
fileOutValues.close()
|
|
|
|
|
|
# iterate over files in the directory
|
|
for filename in os.listdir(directory):
|
|
strFileNameWithPath = os.path.join(directory, filename)
|
|
# checking if it is a file
|
|
if os.path.isfile(strFileNameWithPath):
|
|
print(strFileNameWithPath)
|
|
# check the file extension:
|
|
if (strFileNameWithPath[-5:]==".pcap") or (strFileNameWithPath[-7:]==".pcapng"):
|
|
print("Will decode " + strFileNameWithPath)
|
|
convertPcapToTxt(strFileNameWithPath)
|