In a few places, the data to be set as the IV is already within an array.
We shouldn't require this data to be heap-allocated if it doesn't need
to be. This allows certain callers to reduce heap churn.
The general pattern is to mark mutexes as mutable when it comes to
matters of constness, given the mutex acts as a transient member of a
data structure.
* ipc: Allow all trivially copyable objects to be passed directly into WriteBuffer
With the support of C++20, we can use concepts to deduce if a type is an STL container or not.
* More agressive concept for stl containers
* Add -fconcepts
* Move to common namespace
* Add Common::IsBaseOf
This implements: Socket, Poll, Accept, Bind, Connect, GetPeerName,
GetSockName, Listen, Fcntl, SetSockOpt, Shutdown, Recv, RecvFrom,
Send, SendTo, Write, and Close
The implementation was done referencing: SwIPC, switchbrew, testing
with libnx and inspecting its code, general information about bsd
sockets online, and analysing official software.
Not everything from these service calls is implemented, but everything
that is not implemented will be logged in some way.
This abstraction allows executing blocking functions (like recvfrom on a
socket configured for blocking) without blocking the service thread.
It is intended to be used with SleepClientThread.
Makes the interface future-proofed for supporting other platforms in the event we ever support platforms with differing pointer sizes. This way, we have a type in place that is always guaranteed to be able to represent a pointer exactly.
Not using the return value of these functions are undeniably the source
of a bug. This way we allow compilers to loudly make any future misuses
evident.
src/core/network/network.cpp:112:28: error: use of undeclared identifier 'SHUT_RD'
constexpr int SD_RECEIVE = SHUT_RD;
^
src/core/network/network.cpp:113:25: error: use of undeclared identifier 'SHUT_WR'
constexpr int SD_SEND = SHUT_WR;
^
src/core/network/network.cpp:114:25: error: use of undeclared identifier 'SHUT_RDWR'
constexpr int SD_BOTH = SHUT_RDWR;
^
src/core/network/network.cpp:120:37: error: unknown type name 'in_addr'; did you mean 'in_addr_t'?
constexpr IPv4Address TranslateIPv4(in_addr addr) {
^~~~~~~
in_addr_t
/usr/include/netdb.h:66:20: note: 'in_addr_t' declared here
typedef __uint32_t in_addr_t;
^
src/core/network/network.cpp:121:27: error: member reference base type 'in_addr_t' (aka 'unsigned int') is not a structure or union
const u32 bytes = addr.s_addr;
~~~~^~~~~~~
src/core/network/network.cpp:121:15: error: variables defined in a constexpr function must be initialized
const u32 bytes = addr.s_addr;
^
src/core/network/network.cpp:126:10: error: incomplete result type 'sockaddr' in function definition
sockaddr TranslateFromSockAddrIn(SockAddrIn input) {
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:127:5: error: unknown type name 'sockaddr_in'; did you mean 'sockaddr'?
sockaddr_in result;
^~~~~~~~~~~
sockaddr
/usr/include/netdb.h:142:9: note: 'sockaddr' declared here
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:127:17: error: variable has incomplete type 'sockaddr'
sockaddr_in result;
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:131:29: error: use of undeclared identifier 'AF_INET'
result.sin_family = AF_INET;
^
src/core/network/network.cpp:135:29: error: use of undeclared identifier 'AF_INET'
result.sin_family = AF_INET;
^
src/core/network/network.cpp:139:23: error: use of undeclared identifier 'htons'
result.sin_port = htons(input.portno);
^
src/core/network/network.cpp:143:14: error: variable has incomplete type 'sockaddr'
sockaddr addr;
^
/usr/include/netdb.h:142:9: note: forward declaration of 'sockaddr'
struct sockaddr *ai_addr; /* binary address */
^
src/core/network/network.cpp:156:1: error: unknown type name 'linger'
linger MakeLinger(bool enable, u32 linger_value) {
^
src/core/network/network.cpp:157:5: error: unknown type name 'linger'
linger value;
^
src/core/network/network.cpp:185:16: error: use of undeclared identifier 'AF_INET'
return AF_INET;
^
src/core/network/network.cpp:195:16: error: use of undeclared identifier 'SOCK_STREAM'
return SOCK_STREAM;
^
src/core/network/network.cpp:197:16: error: use of undeclared identifier 'SOCK_DGRAM'
return SOCK_DGRAM;
^
src/core/network/network.cpp:207:16: error: use of undeclared identifier 'IPPROTO_TCP'
return IPPROTO_TCP;
^
fatal error: too many errors emitted, stopping now [-ferror-limit=]
This commit adds a network abstraction designed to implement bsd:s but
at the same time work as a generic abstraction to implement any
networking code we have to use from core.
This is implemented on top of BSD sockets on Unix systems and winsock on
Windows. The code is designed around winsocks having compatibility
definitions to support both BSD and Windows sockets.
If subdirectories exist in the given path parameter and don't exist in the real filesystem create them prior to creating the files within.
This fixes the softlocks upon save creation in The Legend of Zelda: Breath of the Wild
These aren't directly important or commonly used within the process, so
we can move these to the bottom to allow everything else to be more
likely to be within a cache line.
In all usages of LogSetting(), string literals are provided.
std::string_view is better suited here, as we won't churn a bunch of
string allocations every time the settings are logged out.
While we're at it, we can fold LogSetting() into LogSettings(), given
it's only ever used there.
- This checks for and removes old updates or dlc based on title id. If a content meta nca exists within the registered cache, it will attempt to remove all the ncas associated with the content meta before installing a new update/dlc
Profiling shows that this is a highly contested mutex, causing dimishing
results compared to a OS lock. std::mutex implementations can spin for a
while before falling back to an OS lock.
This avoids wasting precious CPU cycles in a no-op.
When zero byte files are present, the key (offset) for that file is identical to the file right after. A std::map isn't able to fit key-value pairs with identical keys (offsets), therefore, the solution is to use std::multimap which permits multiple entries with the same key.
This most prominently fixes Pokemon Sword and Shield weather with any RomFS mod applied.
The file wasn't closed prior to being renamed / moved, throwing an error that states "The process cannot access the file because it is being used by another process." Fix this by closing the file prior to a rename / move operation.
Fixes saving in Luigi's Mansion 3 and KATANA KAMI: A Way of the Samurai Story.
We should not be limited by the SDMC's partition size, set this to 1 TiB. Hardware is limited to the max allowed by the MBR partition table which is 2 TiB.
Sets the total space of user and system partitions to their hardware defaults.
Furthermore, return the total space as free space for the user partition to prevent it from reaching zero.
Some games like Bioshock 2 check for the available free space prior to save creation, and we should not be limited by arbitrary limits.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
Stub this by sending 1 layer id instead of 2 as yuzu does not support multiple layers per display.
No adverse side effects have been observed.
- Used by Animal Crossing: New Horizons Update 1.3.0
