Another error that got pass me and only noticed when I was doing the per-game settings UI rework. This prevents asynchronous GPU emulation from being disabled while multi core is enabled as a result of a poorly put together per-game config.
This is likely an oversight during a rebase. Guards use_multi_core to be only set when the global value is in use. It should not make a difference given the current code base, but makes the code sensible.
Provides the buildbot with one builder that is always tracking the
latest version of the C++ standard, allowing us to progressively rectify
our code and amend any differences between standards over time instead
of waiting for a complete standard change, potentially breaking a lot of
code all at once.
Key issues fixed:
- Progress dialog showing up as white/hanging/getting stuck/unresponsive.
Key changes:
- Progress dialog now shows progress as a function of all files instead of per nca within a file.
- Overwrite existing files will overwrite all files in the selection.
* Switch game settings to use a pointer
In order to add full per-game settings, we need to be able to tell yuzu to switch
to using either the global or game configuration. Using a pointer makes it easier
to switch.
* configuration: add new UI without changing existing funcitonality
The new UI also adds General, System, Graphics, Advanced Graphics,
and Audio tabs, but as yet they do nothing. This commit keeps yuzu
to the same functionality as originally branched.
* configuration: Rename files
These weren't included in the last commit. Now they are.
* configuration: setup global configuration checkbox
Global config checkbox now enables/disables the appropriate tabs in the game
properties dialog. The use global configuration setting is now saved to the
config, defaulting to true. This also addresses some changes requested in the PR.
* configuration: swap to per-game config memory for properties dialog
Does not set memory going in-game. Swaps to game values when opening the
properties dialog, then swaps back when closing it. Uses a `memcpy` to swap.
Also implements saving config files, limited to certain groups of configurations
so as to not risk setting unsafe configurations.
* configuration: change config interfaces to use config-specific pointers
When a game is booted, we need to be able to open the configuration dialogs
without changing the settings pointer in the game's emualtion. A new pointer
specific to just the configuration dialogs can be used to separate changes
to just those config dialogs without affecting the emulation.
* configuration: boot a game using per-game settings
Swaps values where needed to boot a game.
* configuration: user correct config during emulation
Creates a new pointer specifically for modifying the configuration while
emulation is in progress. Both the regular configuration dialog and the game
properties dialog now use the pointer Settings::config_values to focus edits to
the correct struct.
* settings: split Settings::values into two different structs
By splitting the settings into two mutually exclusive structs, it becomes easier,
as a developer, to determine how to use the Settings structs after per-game
configurations is merged. Other benefits include only duplicating the required
settings in memory.
* settings: move use_docked_mode to Controls group
`use_docked_mode` is set in the input settings and cannot be accessed from the
system settings. Grouping it with system settings causes it to be saved with
per-game settings, which may make transferring configs more difficult later on,
especially since docked mode cannot be set from within the game properties
dialog.
* configuration: Fix the other yuzu executables and a regression
In main.cpp, we have to get the title ID before the ROM is loaded, else the
renderer will reflect only the global settings and now the user's game specific
settings.
* settings: use a template to duplicate memory for each setting
Replaces the type of each variable in the Settings::Values struct with a new
class that allows basic data reading and writing. The new struct
Settings::Setting duplicates the data in memory and can manage global overrides
per each setting.
* configuration: correct add-ons config and swap settings when apropriate
Any add-ons interaction happens directly through the global values struct.
Swapping bewteen structs now also includes copying the necessary global configs
that cannot be changed nor saved in per-game settings. General and System config
menus now update based on whether it is viewing the global or per-game settings.
* settings: restore old values struct
No longer needed with the Settings::Setting class template.
* configuration: implement hierarchical game properties dialog
This sets the apropriate global or local data in each setting.
* clang format
* clang format take 2
can the docker container save this?
* address comments and style issues
* config: read and write settings with global awareness
Adds new functions to read and write settings while keeping the global state in
focus. Files now generated per-game are much smaller since often they only need
address the global state.
* settings: restore global state when necessary
Upon closing a game or the game properties dialog, we need to restore all global
settings to the original global state so that we can properly open the
configuration dialog or boot a different game.
* configuration: guard setting values incorrectly
This disables setting values while a game is running if the setting is
overwritten by a per game setting.
* config: don't write local settings in the global config
Simple guards to prevent writing the wrong settings in the wrong files.
* configuration: add comments, assume less, and clang format
No longer assumes that a disabled UI element means the global state is turned
off, instead opting to directly answer that question. Still however assumes a
game is running if it is in that state.
* configuration: fix a logic error
Should not be negated
* restore settings' global state regardless of accept/cancel
Fixes loading a properties dialog and causing the global config dialog to show
local settings.
* fix more logic errors
Fixed the frame limit would set the global setting from the game properties
dialog. Also strengthened the Settings::Setting member variables and simplified
the logic in config reading (ReadSettingGlobal).
* fix another logic error
In my efforts to guard RestoreGlobalState, I accidentally negated the IsPowered
condition.
* configure_audio: set toggle_stretched_audio to tristate
* fixed custom rtc and rng seed overwriting the global value
* clang format
* rebased
* clang format take 4
* address my own review
Basically revert unintended changes
* settings: literal instead of casting
"No need to cast, use 1U instead"
Thanks, Morph!
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
* Revert "settings: literal instead of casting
"
This reverts commit 95e992a87c898f3e882ffdb415bb0ef9f80f613f.
* main: fix status buttons reporting wrong settings after stop emulation
* settings: Log UseDockedMode in the Controls group
This should have happened when use_docked_mode was moved over to the controls group
internally. This just reflects this in the log.
* main: load settings if the file has a title id
In other words, don't exit if the loader has trouble getting a title id.
* use a zero
* settings: initalize resolution factor with constructor instead of casting
* Revert "settings: initalize resolution factor with constructor instead of casting"
This reverts commit 54c35ecb46a29953842614620f9b7de1aa9d5dc8.
* configure_graphics: guard device selector when Vulkan is global
Prevents the user from editing the device selector if Vulkan is the global
renderer backend. Also resets the vulkan_device variable when the users
switches back-and-forth between global and Vulkan.
* address reviewer concerns
Changes function variables to const wherever they don't need to be changed. Sets Settings::Setting to final as it should not be inherited from. Sets ConfigurationShared::use_global_text to static.
Co-Authored-By: VolcaEM <volcaem@users.noreply.github.com>
* main: load per-game settings after LoadROM
This prevents `Restart Emulation` from restoring the global settings *after* the per-game settings were applied. Thanks to BSoDGamingYT for finding this bug.
* Revert "main: load per-game settings after LoadROM"
This reverts commit 9d0d48c52d2dcf3bfb1806cc8fa7d5a271a8a804.
* main: only restore global settings when necessary
Loading the per-game settings cannot happen after the ROM is loaded, so we have to specify when to restore the global state. Again thanks to BSoD for finding the bug.
* configuration_shared: address reviewer concerns except operator overrides
Dropping operator override usage in next commit.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
* settings: Drop operator overrides from Setting template
Requires using GetValue and SetValue explicitly. Also reverts a change that broke title ID formatting in the game properties dialog.
* complete rebase
* configuration_shared: translate "Use global configuration"
Uses ConfigurePerGame to do so, since its usage, at least as of now, corresponds with ConfigurationShared.
* configure_per_game: address reviewer concern
As far as I understand, it prevents the program from unnecessarily copying strings.
Co-Authored-By: LC <lioncash@users.noreply.github.com>
Co-authored-by: Morph <39850852+Morph1984@users.noreply.github.com>
Co-authored-by: VolcaEM <volcaem@users.noreply.github.com>
Co-authored-by: LC <lioncash@users.noreply.github.com>
This commit: Implements CPU Interrupts, Replaces Cycle Timing for Host
Timing, Reworks the Kernel's Scheduler, Introduce Idle State and
Suspended State, Recreates the bootmanager, Initializes Multicore
system.
Occurs when doing a local compile in MSVC build. The compiler I'm using is as below:
Microsoft Visual Studio Community 2019 Preview
Version 16.6.0 Preview 5.0
Fixes this error:
CVTRES : fatal error CVT1100: duplicate resource. type:MANIFEST, name:1, language:0x0409
LINK : fatal error LNK1123: failure during conversion to COFF: file invalid or corrupt
I have put 0 since previous name was 1. If have other names in mind, please let me know.
Co-Authored-By: dragios <dragios@users.noreply.github.com>
Previously, we were reading the keys everytime a KeyManager object was created, causing yuzu to reread the keys file multiple hundreds of times when loading the game list.
With this change, it is only loaded once.
On my system, this decreased game list loading times by a factor of 20.
Patch the RomFS with the selected updates before dumping. Previously the resulting RomFS only contained data from the original title.
To dump the RomFS without updates the user can disable the update under Properties before choosing Dump RomFS.
Allows reporting more cases where logic errors may exist, such as
implicit fallthrough cases, etc.
We currently ignore unused parameters, since we currently have many
cases where this is intentional (virtual interfaces).
While we're at it, we can also tidy up any existing code that causes
warnings. This also uncovered a few bugs as well.
Makes popup texts more compact and clear and also links our quickstart guide now.
Also removes OnMenuSelectEmulatedDirectory from the File dropdown, as the action already exists in the Filesystem tab and provides better visual feedback there.
Presentation context always has GL_DRAW_FRAMEBUFFER_BINDING as zero.
There is no need to bind the default framebuffer constantly.
According to Nsight this was using ~0.7ms per frame and it broke
renderdoc captures.
Should fixcitra-emu/citra#4593.
As the issue might not be entirely clear, I'll offer a short explanation from what I understood from it and found from experimentation.
Currently yuzu offers the user the option to change the text that's displayed in the "Name" column in the game list. Generally, it is expected that the items are sorted based on the displayed text, but yuzu would sort them by title instead.
Made it so that an access to SortRole returns the same as DisplayRole.
There shouldn't be any UI changes, only change in behaviour.
Also fixes a bug with directory sorting, where having the directories out of order would enable you to try to "move up" to the addDirectory button, which would crash the emulator.
Co-Authored-By: Vitor K <vitor-k@users.noreply.github.com>
Changes the GraphicsContext to be managed by the GPU core. This
eliminates the need for the frontends to fool around with tricky
MakeCurrent/DoneCurrent calls that are dependent on the settings (such
as async gpu option).
This also refactors out the need to use QWidget::fromWindowContainer as
that caused issues with focus and input handling. Now we use a regular
QWidget and just access the native windowHandle() directly.
Another change is removing the debug tool setting in FrameMailbox.
Instead of trying to block the frontend until a new frame is ready, the
core will now take over presentation and draw directly to the window if
the renderer detects that its hooked by NSight or RenderDoc
Lastly, since it was in the way, I removed ScopeAcquireWindowContext and
replaced it with a simple subclass in GraphicsContext that achieves the
same result
This commit disables the Boxcat backend by default for new users of yuzu.
There's several reasons as to why this is done:
1. Boxcat currently only actually has an impact on 3 games and doesn't influence any core mechanics of them
2. It causes a plethora of issues when enabled such as games like Crash Team Racing, Diablo 3 and Tales of Vesperia not booting at all or hanging
3. It causes https://github.com/yuzu-emu/yuzu/issues/2957 to happen. This makes the configuration menu totally unusable for many Linux users of yuzu
I think those points show that currently the negative impact of Boxcat outweighs its benefits and should therefore be disabled by default.
For users who are eager to use the extra features provided by it, they can still just turn it on in the settings.
This removes the "exit lock" popup from yuzu when pausing a game.
Motivation
The exit lock feature is broken in many ways and doesn't work properly in a lot of games, causing it to appear every time you want to pause the game or stop it, even in places where it wouldn't on Switch.
Additionally, the feature of pausing a game doesn't exist like this on Switch and yuzu should be guaranteed to be deterministic anyway, so pausing the emulation shouldn't be able to interrupt any critical processes in any way.
An implementation of the cemuhook motion/touch protocol, this adds the
ability for users to connect several different devices to citra to send
direct motion and touch data to citra.
Co-Authored-By: jroweboy <jroweboy@gmail.com>
MakeCurrent is a costly (according to Nsight's profiler it takes a tenth
of a millisecond to complete), and we don't have a reason to call it
because:
- Qt no longer signals a warning if it's not called
- yuzu no longer supports macOS
With all of the trivial parts of the memory interface moved over, we can
get right into moving over the bits that are used.
Note that this does require the use of GetInstance from the global
system instance to be used within hle_ipc.cpp and the gdbstub. This is
fine for the time being, as they both already rely on the global system
instance in other functions. These will be removed in a change directed
at both of these respectively.
For now, it's sufficient, as it still accomplishes the goal of
de-globalizing the memory code.
Emulates negative y viewports with ARB_clip_control. This allows us to
more easily emulated pipelines with tessellation and/or geometry shader
stages. It also avoids corrupting games with transform feedbacks and
negative viewports (gl_Position.y was being modified).
- This does not actually seem to exist in the real kernel - games reset these automatically.
# Conflicts:
# src/core/hle/service/am/applets/applets.cpp
# src/core/hle/service/filesystem/fsp_srv.cpp
These two colorful themes are based on the Default and Dark themes, and contain icons that are colored rather than black and white. These icons come from icons8.com and they have been slightly revised by me. I'm pretty sure I was licensed to use them for Citra.
Co-Authored-By: Pengfei Zhu <zhupengfei321@sina.cn>
The speed limiter being a frame limiter is an implmentation detail and can be changed in the future. What user care about is that it limit the emulation speed in genenral (not just graphics but also audio+input)
Co-Authored-By: Weiyi Wang <wwylele@gmail.com>
We can simply enable CMAKE_AUTOUIC and let CMake take care of handling
the UI code generation for targets.
As part of letting CMake automatically handle the header file parsing,
we must not name includes with "ui_*" unless they're related to the
output of the Qt UIC compiler. Because of this, we need to rename
ui_settings, given it would conflict with this restriction.
The JIT is mature enough that this setting can be removed, falling back
to Unicorn only on unsupported architectures. Any missing features from
Unicorn (of which there are extremely few), are mostly
developer-oriented, which most users don't care about.
Features should be coordinated with the JIT, not the interpreter,
anyhow.
Previously, a translated string was being appended onto another string
in a manner that doesn't allow the translator to control where the
appended text is placed. This can be a nuisance for languages where
grammar and text ordering differs from English.
We now append the strings via the format strings themselves, which
allows translators to reorder where the text will be placed.
A normal user shouldn't change this, as it will slow down the emulation and can lead to bugs or crashes. The renaming is done in order to prevent users from leaving this on without a way to turn it off from the UI.
This is more representative of what actually occurs, as web does support remote URLs which wouldn't need a romfs callback. This paves for easy future support of this with a call like 'OpenPageRemote' or similar.
To prepare for translation support, this makes all of the widgets
cognizant of the language change event that occurs whenever
installTranslator() is called and automatically retranslates their text
where necessary.
This is important as calling the backing UI's retranslateUi() is often
not enough, particularly in cases where we add our own strings that
aren't controlled by it. In that case we need to manually refresh the
strings ourselves.
Enforces the use of the proper URL resolution functions. e.g.
url = some_local_path_string;
should actually be:
url = QUrl::fromLocalPath(some_local_path_string);
etc.
This makes it harder to cause bugs when operating with both strings and
URLs at the same time.
Other overloads of start() are considerably much safer to use if we ever
need this in the future and need to pass arguments to the program, given
it contains separate parameters for the program path and the arguments
themselves, whereas this unsafe overload contains both as a single
string.
Given the alternatives are much safer, we can disable this.
We can make this message more meaningful by indicating the location the
screenshot has been saved to. We can also log out whenever a screenshot
could not be saved (e.g. due to filesystem permissions or some other
reason).
Treating it as a u16 can result in a sign-conversion warning when
performing arithmetic with it, as u16 promotes to an int when aritmetic
is performed on it, not unsigned int.
This also makes the interface more uniform, as the layout interface now
operates on u32 across the board.
We can just pass a pointer to GMainWindow directly and make it a
requirement of the interface. This makes the interface a little safer,
since this would technically otherwise allow any random QWidget to be
the parent of a render window, downcasting it to GMainWindow (which is
undefined behavior).
Stays consistent in our code with using Qt's provided mechanisms, and
also properly handles Unicode paths (which file streams on Windows don't
do very well).
Qt uses a signed value to represent indices. We should follow this
convention where applicable to avoid unnecessary sign-conversion
warnings, as well as making it easier to interoperate with other aspects
of Qt.
While we're at it, we can also make a sign-conversion explicit.
critical() is intended for critical/fatal errors that threaten the
overall stability of an application. A user entering a conflicting key
sequence is neither of those.
1. This is something that should be solely emitted by the hotkey dialog
itself
2. This is functionally unused, given there's nothing listening for the
signal.
The previous code was all "smushed" together wasn't really grouped
together that well.
This spaces things out and separates them by relation to one another,
making it easier to visually parse the individual sections of code that
make up the constructor.
A checkbox is able to be tri-state, giving it three possible activity
types, so in the connect call here, it would actually be truncating an
int into a bool.
Instead, we can just listen on the toggled() signal, which passes along
a bool, not an int.
Given the array is a private static array, we can just make it
internally linked to hide it from external code. This also allows us to
remove an inclusion within the header.
SMDH is a metadata format used in some executable formats for the
Nintendo 3DS. Switch executables don't utilize this metadata format, so
this just a holdover from Citra and can be corrected.
Allows the loading screen code to compile with implicit string
conversions disabled.
While we're at it remove unnecessary const usages, and add it to nearby
variables where appropriate.
Renames the members to more accurately indicate what they signify.
"OneShot" and "Sticky" are kind of ambiguous identifiers for the reset
types, and can be kind of misleading. Automatic and Manual communicate
the kind of reset type in a clearer manner. Either the event is
automatically reset, or it isn't and must be manually cleared.
The "OneShot" and "Sticky" terminology is just a hold-over from Citra
where the kernel had a third type of event reset type known as "Pulse".
Given the Switch kernel only has two forms of event reset types, we
don't need to keep the old terminology around anymore.
Nvidia's proprietary driver creates a real OpenGL compatibility profile
without this option, meanwhile Intel (and probably AMD, I haven't tested
it) require that QSurfaceFormat::FormatOption::DeprecatedFunctions is
explicitly enabled.
For similar reasons to the previous change, we move this to a single
function, so we don't need to duplicate the conversion logic in several
places within main.cpp.
Specifies the conversions explicitly to avoid implicit conversions from
const char* to QString. This makes it easier to disable implicit QString
conversions in the future.
In this case, the implicit conversion was technically wrong as well. The
implicit conversion treats the input strings as ASCII characters. This
would result in an incorrect conversion being performed in the rare case
a branch name was created with a non-ASCII Unicode character, likely
resulting in junk being displayed.
Over time our config values have grown quite numerous in size.
Unfortunately it also makes the single functions we have for loading and
saving values more error prone.
For example, we were loading the core settings twice when they only
should have been loaded once. In another section, a variable was
shadowing another variable used to load settings from a completely
different section.
Finally, in one other case, there was an extraneous endGroup() call used
that didn't need to be done. This was essentially dead code and also a
bug waiting to happen.
This separates the section loading code into its own separate functions.
This keeps variables only visible to the code that actually needs it,
and makes it much easier to visually see the end of each individual
configuration group. It also makes it much easier to visually catch bugs
during code review.
While we're at it, this also uses QStringLiteral instead of raw string
literals, which both avoids constructing a lot of QString instances, but
also makes it much easier to disable implicit ASCII to QString and
vice-versa in the future via setting QT_NO_CAST_FROM_ASCII and
QT_NO_CAST_TO_ASCII as compilation flags.
This option allows picking the compatibility profile since a lot of bugs
are fixed in it. We devs will use this option to easierly debug current
problems in our Core implementation.:wq
This is a holdover from Citra, where the 3DS has both
WaitSynchronization1 and WaitSynchronizationN. The switch only has one
form of wait synchronizing (literally WaitSynchonization). This allows
us to throw out code that doesn't apply at all to the Switch kernel.
Because of this unnecessary dichotomy within the wait synchronization
utilities, we were also neglecting to properly handle waiting on
multiple objects.
While we're at it, we can also scrub out any lingering references to
WaitSynchronization1/WaitSynchronizationN in comments, and change them
to WaitSynchronization (or remove them if the mention no longer
applies).
The default constructor will always run, even when not specified, so
this is redundant.
However, the context member can indeed be initialized in the constructor
initializer list.
This is a compile definition introduced in Qt 4.8 for reducing the total
potential number of strings created when performing string
concatenation. This allows for less memory churn.
This can be read about here:
https://blog.qt.io/blog/2011/06/13/string-concatenation-with-qstringbuilder/
For a change that isn't source-compatible, we only had one occurrence
that actually need to have its type clarified, which is pretty good, as
far as transitioning goes.
Without passing in a parent, this can result in focus being stolen from
the dialog in certain cases.
Example:
On Windows, if the logging window is left open, the logging Window will
potentially get focus over the hotkey dialog itself, since it brings all
open windows for the application into view. By specifying a parent, we
only bring windows for the parent into view (of which there are none,
aside from the hotkey dialog).
Avoids dumping all of the core settings machinery into whatever files
include this header. Nothing inside the header itself actually made use
of anything in settings.h anyways.
In our error console, when loading a game, the strings:
QString::arg: Argument missing: "Loading...", 0
QString::arg: Argument missing: "Launching...", 0
would occasionally pop up when the loading screen was running. This was
due to the strings being assumed to have formatting indicators in them,
however only two out of the four strings actually have them.
This only applies the arguments to the strings that have formatting
specifiers provided, which avoids these warnings from occurring.
This doesn't actually work anymore, and given how long it's been left in
that state, it's unlikely anyone actually seriously used it.
Generally it's preferable to use RenderDoc or Nsight to view surfaces.
- Use QStringLiteral where applicable.
- Use const where applicable
- Remove unnecessary precondition check (we already assert the pixbuf
being non null)
Fills in the missing surface types that were marked as unknown. The
order corresponds with the TextureFormat enum within
video_core/texture.h.
We also don't need to all of these strings as translatable (only the
first string, as it's an English word).
Rather than scream that the file doesn't exist, we can clearly state
what specifically doesn't exist, to avoid ambiguity, and make it easier
to understand for non-primary English speakers/readers.
Moves includes into the cpp file where necessary. This way,
microprofile-related stuff isn't dumped into other UI-related code when
the dialog header gets included.
Since C++17, the introduction of deduction guides for locking facilities
means that we no longer need to hardcode the mutex type into the locks
themselves, making it easier to switch mutex types, should it ever be
necessary in the future.
This was initially added to prevent problems from stubbed/not implemented NFC services, but as we never encountered such and as it's only used in a deprecated function anyway, I guess we can just remove it to prevent more clutter of the settings.
We already have the thread instance that was created under the current
process, so we can just pass the handle table of it along to retrieve
the owner of the mutex.
In these cases the system object is nearby, and in the other, the
long-form of accessing the telemetry instance is already used, so we can
get rid of the use of the global accessor.
Changes the interface as well to remove any unique methods that
frontends needed to call such as StartJoystickEventHandler by
conditionally starting the polling thread only if the frontend hasn't
started it already. Additionally, moves all global state into a single
SDLState class in order to guarantee that the destructors are called in
the proper order
MSVC does not seem to like using constexpr values in a lambda that were declared outside of it.
Previously on MSVC build the hotkeys to inc-/decrease the speed limit were not working correctly because in the lambda the SPEED_LIMIT_STEP had garbage values.
After googling around a bit I found: https://github.com/codeplaysoftware/computecpp-sdk/issues/95 which seems to be a similar issue.
Trying the suggested fix to make the variable static constexpr also fixes the bug here.
A holdover from citra, the Horizon kernel on the switch has no
prominent kernel object that functions as a timer. At least not
to the degree of sophistication that this class provided.
As such, this can be removed entirely. This class also wasn't used at
all in any meaningful way within the core, so this was just code sitting
around doing nothing. This also allows removing a few things from the
main KernelCore class that allows it to use slightly less resources
overall (though very minor and not anything really noticeable).
With the loading screen merged, we don't want to actually show at this
point, but it still needs to be shown to actually create the context.
Turns out you can just show and hide it immediately and it'll work.
With shader caches on the horizon, one requirement is to provide visible
feedback for the progress. The shader cache reportedly takes several
minutes to load for large caches that were invalidated, and as such we
should provide a loading screen with progress.
Adds a loading screen widget that will be shown until the first frame of
the game is swapped. This was chosen in case shader caches are not being
used, several games still take more than a few seconds to launch and
could benefit from a loading screen.
This is a function that definitely doesn't always have a non-modifying
behavior across all implementations, so this should be made non-const.
This gets rid of the need to mark data members as mutable to work around
the fact mutating data members needs to occur.
This makes the naming more closely match its meaning. It's just a
preferred core, not a required default core. This also makes the usages
of this term consistent across the thread and process implementations.
Calling tr() from a file-scope array isn't advisable, since it can be
executed before the Qt libraries are even fully initialized, which can
lead to crashes.
Instead, the translatable strings should be annotated, and the tr()
function should be called at the string's usage site.
This allows us to present a much nicer UI to the user over a simple combo box and is made easy with the modular nature of the profile-selection applet frontend.
Using the QtProfileSelectorDialog, this implementation is trivial. This mimics the real switch behavior of asking which user on every game boot, but it is default disabled as that might get inconvenient.
Allows capturing screenshot at the current internal resolution (native for software renderer), but a setting is available to capture it in other resolutions. The screenshot is saved to a single PNG in the current layout.
We can hide the direct array from external view and instead provide
functions to retrieve the necessary info. This has the benefit of
completely hiding the makeup of the SinkDetails structure from the rest
of the code.
Given that this makes the array hidden, we can also make the array
constexpr by altering the members slightly. This gets rid of several
static constructor calls related to std::vector and std::function.
Now we don't have heap allocations here that need to occur before the
program can even enter main(). It also has the benefit of saving a
little bit of heap space, but this doesn't matter too much, since the
savings in that regard are pretty tiny.
Similarly, here we can avoid doing unnecessary work twice by retrieving
the file type only once and comparing it against relevant operands,
avoiding potential unnecessary object construction/destruction.
While GetFileType() is indeed a getter function, that doesn't mean it's
a trivial function, given some case require reading from the data or
constructing other objects in the background. Instead, only do necessary
work once.
Greatly simplifies the current input UI, while still allowing power users to tweak advanced settings. Adds 'input profiles', which are easy autoconfigurations to make getting started easy and fast. Also has a custom option which brings up the current, full UI.
Two kernel object should absolutely never have the same handle ID type.
This can cause incorrect behavior when it comes to retrieving object
types from the handle table. In this case it allows converting a
WritableEvent into a ReadableEvent and vice-versa, which is undefined
behavior, since the object types are not the same.
This also corrects ClearEvent() to check both kernel types like the
kernel itself does.
These slots are only ever attached to event handling mechanisms within
the class itself, they're never used externally. Because of this, we can
make the functions private.
This also removes redundant usages of the private access specifier.
The previous code could potentially be a compilation issue waiting to
occur, given we forward declare the type for a std::unique_ptr. If the
complete definition of the forward declared type isn't visible in a
translation unit that the class is used in, then it would fail to
compile.
Defaulting the destructor in a cpp file ensures the std::unique_ptr's
destructor is only invoked where its complete type is known.
We can just return a new instance of this when it's requested. This only
ever holds pointers to the existing registed caches, so it's not a large
object. Plus, this also gets rid of the need to keep around a separate
member function just to properly clear out the union.
Gets rid of one of five globals in the filesystem code.
We don't need to call out to our own file handling functions when we're
going to construct a QFileInfo instance right after it. We also don't
need to convert to a std::string again just to compare the file
extension.
Prevents compiler warnings related to truncation when invoking the
dialog. It's also extremely suspect to use a u8 value here instead of a
more general type to begin with.
These parameters don't need to utilize a shared lifecycle directly in
the interface. Instead, the caller should provide a regular reference
for the function to use. This also allows the type system to flag
attempts to pass nullptr and makes it more generic, since it can now be
used in contexts where a shared_ptr isn't being used (in other words, we
don't constrain the usage of the interface to a particular mode of
memory management).
The decision was made to name them LayeredExeFS instead of just LayeredFS to differentiate from normal RomFS-based mods. The name may be long/unweildy, but conveys the meaning well.
Uses Qt's built-in interface instead of rolling our own separate one on
top of it. This also fixes a bug in reject() where we were calling
accept() instead of reject().
This allows adjusting the finger, diameter, and angle of the emulated touchscreen. It also provides a warning to the user about what changing these parameters can do.
Started implementation of the AM message queue mainly used in state getters. Added the ability to switch docked mode whilst in game without stopping emulation. Also removed some things which shouldn't be labelled as stubs as they're implemented correctly
As the add-ons column takes the most processing time out of any (as it needs to search registration for updates/dlc, patch control NCAs, search for mods, etc.), an option was added to disable it. This does not affect the application of add-ons. In large game collections, this decreases game list refresh time by as much as 70%.
Previously, we would let a user enter an unbounded name and then
silently truncate away characters that went over the 32-character limit.
This is kind of bad from the UX point of view, because we're essentially
not doing what the user intended in certain scenarios.
Instead, we clamp it to 32 characters and make that visually apparent in
the dialog box to provide a name for a user.
* get rid of boost::optional
* Remove optional references
* Use std::reference_wrapper for optional references
* Fix clang format
* Fix clang format part 2
* Adressed feedback
* Fix clang format and MacOS build
Also adds UI option in Debug > Dump section, with the idea later things to be dumped (i.e. other game data or textures, etc) will use the same group box.
Avoids the need to put the scaling parameters all over the place for the
common case. The only other time scaling is done is to generate the
smaller 48x48 image, so this is fine.
We can just make the function accept an arbitrary ProfileManager
reference and operate on that instead of tying the function to the class
itself. This allows us to keep the function internal to the cpp file and
removes the need to forward declare the UUID struct.
These should be initialized to deterministic values so it's easier to
catch improper behavior, as it'll always be reproducable, instead of
performing uninitialized reads.
These are only used within this class, so we can make them private to
keep their use contained. This also gets rid of the pre-Qt5 'slot'
identifier, since Qt 5's connection syntax doesn't require a function to
be declared a slot anymore.