PKGBUILDs/alarm/uboot-odroid-c2/boot.ini

ODROIDC2-UBOOT-CONFIG

# Possible screen resolutions
# Uncomment only a single Line! The line with setenv written.
# At least one mode must be selected.

# Custom modeline!
# To use custom modeline you need to disable all the below resolutions
# and setup your own! 
# For more information check our wiki: 
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
# Example below:
# setenv m "custombuilt" 
# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"

# Auto Detection of Monitor settings based on your Screen information
# See: http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display
setenv display_autodetect "true"

# 480 Lines (720x480)
# setenv m "480i60hz" # Interlaced 60Hz
# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
# setenv m "480p60hz" # 480 Progressive 60Hz
# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz

# 576 Lines (720x576)
# setenv m "576i50hz" # Interlaced 50Hz
# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
# setenv m "576p50hz" # Progressive 50Hz
# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz

# 720 Lines (1280x720)
# setenv m "720p50hz" # 50Hz
# setenv m "720p60hz" # 60Hz

# 1080 Lines (1920x1080)
# setenv m "1080i60hz" # Interlaced 60Hz
setenv m "1080p60hz" # Progressive 60Hz
# setenv m "1080i50hz" # Interlaced 50Hz
# setenv m "1080p50hz" # Progressive 50Hz
# setenv m "1080p24hz" # Progressive 24Hz

# 4K (3840x2160)
# setenv m "2160p30hz"    # Progressive 30Hz
# setenv m "2160p25hz"    # Progressive 25Hz
# setenv m "2160p24hz"    # Progressive 24Hz
# setenv m "smpte24hz"    # Progressive 24Hz SMPTE
# setenv m "2160p50hz"    # Progressive 50Hz
# setenv m "2160p60hz"    # Progressive 60Hz
# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)

### VESA modes ###
# setenv m "640x480p60hz"
# setenv m "800x480p60hz"
# setenv m "480x800p60hz"
# setenv m "800x600p60hz"
# setenv m "1024x600p60hz"
# setenv m "1024x768p60hz"  
# setenv m "1280x800p60hz"
# setenv m "1280x1024p60hz"
# setenv m "1360x768p60hz"
# setenv m "1440x900p60hz"
# setenv m "1600x900p60hz"
# setenv m "1680x1050p60hz"
# setenv m "1600x1200p60hz"
# setenv m "1920x1200p60hz"
# setenv m "2560x1080p60hz"
# setenv m "2560x1440p60hz"
# setenv m "2560x1600p60hz"
# setenv m "3440x1440p60hz"

# HDMI BPP Mode
setenv m_bpp "32"
# setenv m_bpp "24"
# setenv m_bpp "16"

# HDMI DVI/VGA modes
# By default its set to HDMI, if needed change below.
# Uncomment only a single Line.
# setenv vout "dvi"
# setenv vout "vga"

# HDMI HotPlug Detection control
# Allows you to force HDMI thinking that the cable is connected.
# true = HDMI will believe that cable is always connected
# false = will let board/monitor negotiate the connection status
setenv hpd "true"
# setenv hpd "false"

# Monitor output
# Controls if HDMI PHY should output anything to the monitor
setenv monitor_onoff "false" # true or false

# Server Mode (aka. No Graphics)
# Setting nographics to 1 will disable all video subsystem
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
setenv nographics "0"

# Meson Timer
# 1 - Meson Timer
# 0 - Arch Timer 
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
setenv mesontimer "1"

# UHS (Ultra High Speed) MicroSD mode enable/disable
setenv disableuhs "false"

# MicroSD Card Detection enable/disable
# Force the MMC controlled to believe that a card is connected.
setenv mmc_removable "true"

# USB Multi WebCam tweak
# Only enable this if you use it.
setenv usbmulticam "false"

# Disable/Enable ODROID-VU7 Touchscreen
setenv disable_vu7 "true"

# Default Console Device Setting
setenv condev "console=ttyS0,115200n8 console=tty0"   # on both

# CPU Frequency / Cores control
###########################################
### WARNING!!! WARNING!!! WARNING!!!
# Before changing anything here please read the wiki entry: 
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
#
# MAX CPU's
# setenv maxcpus "1"
# setenv maxcpus "2"
# setenv maxcpus "3"
setenv maxcpus "4"

# MAX Frequency
# setenv max_freq "2016"  # 2.016GHz
# setenv max_freq "1944"  # 1.944GHz
# setenv max_freq "1944"  # 1.944GHz
# setenv max_freq "1920"  # 1.920GHz
# setenv max_freq "1896"  # 1.896GHz
# setenv max_freq "1752"  # 1.752GHz
# setenv max_freq "1680"  # 1.680GHz
# setenv max_freq "1656"  # 1.656GHz
setenv max_freq "1536"  # 1.536GHz



###########################################

# Boot Arguments
if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi

setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam} ${hid_quirks}"

# Booting

setenv loadaddr "0x11000000"
setenv dtb_loadaddr "0x1000000"
setenv initrd_loadaddr "0x13000000"

load mmc 0:1 ${loadaddr} /boot/Image
load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb

fdt addr ${dtb_loadaddr}
if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}" = "1"; then fdt rm /timer; fi

if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi

load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img

booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}