PKGBUILDs/alarm/uboot-odroid-c2/boot.ini

179 lines
6.2 KiB
INI
Raw Normal View History

2016-02-05 04:30:35 +00:00
ODROIDC2-UBOOT-CONFIG
# Possible screen resolutions
# Uncomment only a single Line! The line with setenv written.
# At least one mode must be selected.
2016-09-10 01:08:07 +00:00
# Custom modeline!
# To use custom modeline you need to disable all the below resolutions
# and setup your own!
# For more information check our wiki:
# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
# Example below:
# setenv m "custombuilt"
# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
2017-03-08 01:58:58 +00:00
# Auto Detection of Monitor settings based on your Screen information
# See: http://odroid.com/dokuwiki/doku.php?id=en:c2_auto_detect_display
setenv display_autodetect "true"
2016-02-05 04:30:35 +00:00
# 480 Lines (720x480)
# setenv m "480i60hz" # Interlaced 60Hz
# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
# setenv m "480p60hz" # 480 Progressive 60Hz
# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
# 576 Lines (720x576)
# setenv m "576i50hz" # Interlaced 50Hz
# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
# setenv m "576p50hz" # Progressive 50Hz
# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
# 720 Lines (1280x720)
# setenv m "720p50hz" # 50Hz
# setenv m "720p60hz" # 60Hz
# 1080 Lines (1920x1080)
# setenv m "1080i60hz" # Interlaced 60Hz
setenv m "1080p60hz" # Progressive 60Hz
# setenv m "1080i50hz" # Interlaced 50Hz
# setenv m "1080p50hz" # Progressive 50Hz
# setenv m "1080p24hz" # Progressive 24Hz
# 4K (3840x2160)
# setenv m "2160p30hz" # Progressive 30Hz
# setenv m "2160p25hz" # Progressive 25Hz
# setenv m "2160p24hz" # Progressive 24Hz
# setenv m "smpte24hz" # Progressive 24Hz SMPTE
# setenv m "2160p50hz" # Progressive 50Hz
# setenv m "2160p60hz" # Progressive 60Hz
# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
### VESA modes ###
# setenv m "640x480p60hz"
# setenv m "800x480p60hz"
2016-12-10 18:14:11 +00:00
# setenv m "480x800p60hz"
2016-02-05 04:30:35 +00:00
# setenv m "800x600p60hz"
# setenv m "1024x600p60hz"
# setenv m "1024x768p60hz"
# setenv m "1280x800p60hz"
# setenv m "1280x1024p60hz"
# setenv m "1360x768p60hz"
# setenv m "1440x900p60hz"
# setenv m "1600x900p60hz"
# setenv m "1680x1050p60hz"
2016-08-03 00:12:59 +00:00
# setenv m "1600x1200p60hz"
2016-02-05 04:30:35 +00:00
# setenv m "1920x1200p60hz"
2016-05-26 03:52:03 +00:00
# setenv m "2560x1080p60hz"
# setenv m "2560x1440p60hz"
# setenv m "2560x1600p60hz"
2016-06-17 00:59:15 +00:00
# setenv m "3440x1440p60hz"
2016-02-05 04:30:35 +00:00
# HDMI BPP Mode
setenv m_bpp "32"
# setenv m_bpp "24"
# setenv m_bpp "16"
# HDMI DVI/VGA modes
2017-02-26 01:06:59 +00:00
# By default its set to HDMI, if needed change below.
# Uncomment only a single Line.
2016-02-05 04:30:35 +00:00
# setenv vout "dvi"
# setenv vout "vga"
2016-05-26 03:52:03 +00:00
# HDMI HotPlug Detection control
# Allows you to force HDMI thinking that the cable is connected.
# true = HDMI will believe that cable is always connected
# false = will let board/monitor negotiate the connection status
setenv hpd "true"
# setenv hpd "false"
2017-02-26 01:06:59 +00:00
# Monitor output
# Controls if HDMI PHY should output anything to the monitor
setenv monitor_onoff "false" # true or false
# Server Mode (aka. No Graphics)
# Setting nographics to 1 will disable all video subsystem
# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
setenv nographics "0"
2016-02-05 04:30:35 +00:00
2016-05-26 03:52:03 +00:00
# Meson Timer
# 1 - Meson Timer
# 0 - Arch Timer
2016-09-10 01:08:07 +00:00
# Using meson_timer improves the video playback however it breaks KVM (virtualization).
2016-05-26 03:52:03 +00:00
# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
setenv mesontimer "1"
2017-02-26 01:06:59 +00:00
# UHS (Ultra High Speed) MicroSD mode enable/disable
setenv disableuhs "false"
2016-05-26 03:52:03 +00:00
2017-02-26 01:06:59 +00:00
# MicroSD Card Detection enable/disable
# Force the MMC controlled to believe that a card is connected.
setenv mmc_removable "true"
# USB Multi WebCam tweak
# Only enable this if you use it.
setenv usbmulticam "false"
2017-02-28 02:08:03 +00:00
# Disable/Enable ODROID-VU7 Touchscreen
setenv disable_vu7 "true"
2017-02-26 01:06:59 +00:00
# Default Console Device Setting
setenv condev "console=ttyS0,115200n8 console=tty0" # on both
2016-09-10 01:08:07 +00:00
# CPU Frequency / Cores control
###########################################
### WARNING!!! WARNING!!! WARNING!!!
# Before changing anything here please read the wiki entry:
# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
#
# MAX CPU's
# setenv maxcpus "1"
# setenv maxcpus "2"
# setenv maxcpus "3"
setenv maxcpus "4"
# MAX Frequency
# setenv max_freq "2016" # 2.016GHz
# setenv max_freq "1944" # 1.944GHz
# setenv max_freq "1944" # 1.944GHz
# setenv max_freq "1920" # 1.920GHz
# setenv max_freq "1896" # 1.896GHz
# setenv max_freq "1752" # 1.752GHz
# setenv max_freq "1680" # 1.680GHz
# setenv max_freq "1656" # 1.656GHz
setenv max_freq "1536" # 1.536GHz
2016-02-05 04:30:35 +00:00
###########################################
# Boot Arguments
2017-03-08 01:58:58 +00:00
if test "${display_autodetect}" = "true"; then usb pwren; hdmitx edid; fi
2016-09-10 01:08:07 +00:00
if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
2017-02-28 02:08:03 +00:00
if test "${disable_vu7}" = "false"; then setenv hid_quirks "usbhid.quirks=0x0eef:0x0005:0x0004"; fi
2016-09-10 01:08:07 +00:00
2017-02-28 02:08:03 +00:00
setenv bootargs "root=/dev/mmcblk0p1 rootwait rw ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam} ${hid_quirks}"
2016-02-05 04:30:35 +00:00
# Booting
setenv loadaddr "0x11000000"
setenv dtb_loadaddr "0x1000000"
setenv initrd_loadaddr "0x13000000"
load mmc 0:1 ${loadaddr} /boot/Image
load mmc 0:1 ${dtb_loadaddr} /boot/dtbs/meson64_odroidc2.dtb
2016-05-26 03:52:03 +00:00
fdt addr ${dtb_loadaddr}
if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}" = "1"; then fdt rm /timer; fi
2016-06-17 00:59:15 +00:00
2016-05-29 15:06:37 +00:00
if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
2016-06-17 00:59:15 +00:00
if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
2016-05-26 03:52:03 +00:00
2016-02-05 04:30:35 +00:00
load mmc 0:1 ${initrd_loadaddr} /boot/initramfs-linux.img
booti ${loadaddr} ${initrd_loadaddr}:${filesize} ${dtb_loadaddr}