PKGBUILDs/core/linux-espressobin/0005-arm64-dts-marvell-Enable-second-SDHCI-controller-in-.patch
2017-08-08 00:25:46 +00:00

72 lines
2.2 KiB
Diff

From aff7d41d285c04f5990247660c860e30029f72b2 Mon Sep 17 00:00:00 2001
From: Konstantin Porotchkin <kostap@marvell.com>
Date: Tue, 23 May 2017 16:11:40 +0300
Subject: [PATCH 05/11] arm64: dts: marvell: Enable second SDHCI controller in
Armada 37xx
The Armada 37xx SoCs has 2 SDHCI interfaces. This patch adds the second
one.
Moreover, the Armada 37xx DB v2 board populates the 2 SDHCI interfaces.
The second interface is using pluggable module that can either
have an SD connector or eMMC on it.
This patch adds support for SD module in the device DT.
[ gregory.clement@free-electrons.com:
- Add more detail in commit log
- Sort the dt node in address order
- Document the SD slot in the dts ]
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm64/boot/dts/marvell/armada-3720-db.dts | 9 +++++++++
arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 11 +++++++++++
2 files changed, 20 insertions(+)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index a89855f57091..6a0abd7a5349 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -113,6 +113,15 @@
status = "okay";
};
+/* SD slot module on CON14(V2.0)/CON15(V1.4) */
+&sdhci1 {
+ wp-inverted;
+ cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ marvell,pad-type = "sd";
+ status = "okay";
+};
+
&spi0 {
status = "okay";
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index f4deb8cd11c6..a78195b4ef7a 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -293,6 +293,17 @@
};
};
+ sdhci1: sdhci@d0000 {
+ compatible = "marvell,armada-3700-sdhci",
+ "marvell,sdhci-xenon";
+ reg = <0xd0000 0x300>,
+ <0x1e808 0x4>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&nb_periph_clk 0>;
+ clock-names = "core";
+ status = "disabled";
+ };
+
sdhci0: sdhci@d8000 {
compatible = "marvell,armada-3700-sdhci",
"marvell,sdhci-xenon";
--
2.13.3