github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2025-02-16 14:07:10 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-30 19:40:42 +00:00 committed by GitHub
parent 87675a909c
commit c3c78e60ee
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 1 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

4
README.md
View file

@ -72,7 +72,9 @@ To check temperature sensors connectors crimp one array of sensors. Plug it to a
{-Screenshot: serial console with temperature readings: -}<br> {-Screenshot: serial console with temperature readings: -}<br>
After tests completed comment 3 self-test defines and re-upload firmware.<br><br> After tests completed comment 3 self-test defines and re-upload firmware.<br><br>
## Wiring ## Wiring (permanent controller installation).
Here are no instructions for choosing the right placement for permanent installation of the controller. It depends. You're building your system, and you know much better "where" and "how".<br>
Assuming you have installed your controller to the permanent place, the next step is wiring.<br><br>
Wiring is very simple, despite a lot of terminals.<br> Wiring is very simple, despite a lot of terminals.<br>
Phases (1st wire in electrical cables): Phases (1st wire in electrical cables):
- connect the "power inlet" wire to one of the "phase" terminals, - connect the "power inlet" wire to one of the "phase" terminals,