github-mirrors/HeatPumpController
1
0
Fork 0
mirror of https://github.com/openhp/HeatPumpController.git synced 2024-11-08 12:25:43 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions

Update README.md

Browse source
This commit is contained in:
openhp 2021-03-22 10:32:24 +00:00 committed by GitHub
parent d59af8586f
commit d178261bab
No known key found for this signature in database
GPG key ID: 4AEE18F83AFDEB23
1 changed files with 13 additions and 18 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

31
README.md
View file

@ -129,22 +129,28 @@ qwer
## Diagnostic and status messages ## Diagnostic and status messages
**LastStopCause messages. Why system was stopped**<br><br> **LastStopCause messages. Why system was stopped**<br><br>
**Normal_stop** normal stop, i.e. setpoint sensor temperature > setpoint, so no need to heat anymore<br>
**P.WtMax:_WATTS_** Protective stop, overcurrent, double check your system, **MAX_WATTS** and **POWERON_HIGHTIME** options<br> **P.WtMax:_WATTS_** Protective stop, overcurrent, double check your system, **MAX_WATTS** and **POWERON_HIGHTIME** options<br>
**E.Tci, E.Tco, E.Tbe, E.Tae, E.Ts1, E.Ts2, E.Tcrc, E.Treg, E.Tac, E.Tbc, E.Tho, E.Thi** Sensor lost, check wiring. Refer to "T sensors abbreviations"<br> **E.Tci, E.Tco, E.Tbe, E.Tae, E.Ts1, E.Ts2, E.Tcrc, E.Treg, E.Tac, E.Tbc, E.Tho, E.Thi** Sensor lost, check wiring. Refer to "T sensors abbreviations"<br>
**E.PresCold** Cold side pressure too low, check refrigerant charge and pressure sensors<br> **E.PresCold** Cold side pressure too low, check refrigerant charge and pressure sensors<br>
**E.PresHot** Hot side pressure too high, check refrigerant charge and pressure sensors<br> **E.PresHot** Hot side pressure too high, check refrigerant charge and pressure sensors<br>
<br> <br>
<br> <br>
**LastStartMessage messages. what event system is waiting for starting work**<br><br> **LastStartMessage messages. what event system is waiting for starting work**<br><br>
**StCntd:_seconds_** startup countdown, short-term power loss protection<br> **StCntd:_seconds_** startup countdown, short-term power loss protection<br>
**HP_Started** normal start<br>
**HWP_OFF** setpoint sensor temperature > setpoint, so hot side pump powered off and going to power saving mode, see **HOTCIRCLE_STOP_AFTER** <br>
**HWP_ON_by_ev** hot side pump started after power saving, see **HOTCIRCLE_START_EVERY** option <br>
**#CWPpStart** coldside pump started, preparing system to start compressor<br>
**#HotPrp:_seconds_** hot side pump is on, waiting for T stabilisation countdown see **HOTCIRCLE_CHECK_PREPARE** option<br> **#HotPrp:_seconds_** hot side pump is on, waiting for T stabilisation countdown see **HOTCIRCLE_CHECK_PREPARE** option<br>
**#HotSlp:_seconds_** sleepeng, last cycle temperature was > setpoint, waiting for next startup, see **HOTCIRCLE_START_EVERY** option<br> **#HotSlp:_seconds_** sleepeng, last cycle temperature was > setpoint, waiting for next startup, see **HOTCIRCLE_START_EVERY** option<br>
**#HPSlp:_seconds_**" + String( (mincycle_poweroff -(unsigned long)(millis_now - millis_last_heatpump_on))/1000 );<br> **#HPSlp:_seconds_**" + String( (mincycle_poweroff -(unsigned long)(millis_now - millis_last_heatpump_on))/1000 );<br>
**#CWPp:_seconds_** coldside pumping, preparing countdown**COLDCIRCLE_PREPARE** option<br>
**#Tho>Max** T_HOT_MAX <br> **#Tho>Max** , see **T_HOT_MAX** option <br>
**#Thi>Max** T_HOT_MAX <br> **#Thi>Max** , see **T_HOT_MAX** option <br>
**#CaseCold** T_CRANKCASE_MIN <br> **#CaseCold** , see **T_CRANKCASE_MIN** option <br>
**#CaseHot** T_CRANKCASE_MAX <br> **#CaseHot** , see **T_CRANKCASE_MAX** option <br>
**#Thi>Setp.** hot in temperature > setpoint, so no reason to start<br> **#Thi>Setp.** hot in temperature > setpoint, so no reason to start<br>
**#Ts1>Setp.** s1 temperature > setpoint, so no reason to start, see SETPOINT_TS1 option to switch betwees Thi and Ts1 as setpoint sensor <br> **#Ts1>Setp.** s1 temperature > setpoint, so no reason to start, see SETPOINT_TS1 option to switch betwees Thi and Ts1 as setpoint sensor <br>
**#Tae<RefMin** After Evaporator temperature is too low, check system, see **T_COLDREF_MIN** option<br> **#Tae<RefMin** After Evaporator temperature is too low, check system, see **T_COLDREF_MIN** option<br>
@ -152,19 +158,8 @@ qwer
**#Tbc>Max** Before Condenser temperature is too high, check system, see **T_BEFORE_CONDENSER_MAX** option<br> **#Tbc>Max** Before Condenser temperature is too high, check system, see **T_BEFORE_CONDENSER_MAX** option<br>
**#Tci<ColdMin** Cold In temperature is too low, see **T_COLD_MIN** option <br> **#Tci<ColdMin** Cold In temperature is too low, see **T_COLD_MIN** option <br>
**#Tco<ColdMin** Cold In temperature is too high, see **T_COLD_MIN** option <br> **#Tco<ColdMin** Cold In temperature is too high, see **T_COLD_MIN** option <br>
**#CWPpStart** coldside pump started, preparing system to start compressor<br> **CWP_ON_CoMin** coldside pump started, cold side temperature is too low, so preventing cold loop freeze, see **T_COLD_MIN** option <br>
**#CWPp:_seconds_** coldside pumping, preparing countdown**COLDCIRCLE_PREPARE** option<br>
**HP_Started** normal start<br>
**Normal_stop** normal stop, i.e. setpoint sensor temperature > setpoint, so no need to heat anymore<br>
**HWP_ON_by_ev** hot side pump started after power saving, see **HOTCIRCLE_START_EVERY** option <br>
**HWP_OFF** setpoint sensor temperature > setpoint, so hot side pump powered off and going to power saving mode, see **HOTCIRCLE_STOP_AFTER** <br>
Tci < cT_cold_min) && (coldside_circle_state == 0) ) {
//PrintSS(F("CWP ON by ColdMin"));
lastStartMsgTxt = F("CWP_ON_CoMin");
cT_hot_max) {heatpump_state = 0; lastStopCauseTxt = F("P.Tho"); cT_hot_max) {heatpump_state = 0; lastStopCauseTxt = F("P.Tho");
cT_hot_max) {heatpump_state = 0; lastStopCauseTxt = F("P.Thi"); cT_hot_max) {heatpump_state = 0; lastStopCauseTxt = F("P.Thi");