Roman Khavronenko
5bdd880142
vmstorage: add more context to the flock acquiring msg ( #3584 )
...
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3578
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
2023-01-05 18:30:42 -08:00
Aliaksandr Valialkin
1b16118e17
lib/{storage,mergeset}: tune the threshold for assisted merge
...
The https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3425#issuecomment-1359117221
reveals that CPU usage for incoming queries may significantly increase when the number
of in-memory parts becomes too big.
This commit reduces the maximum number of in-memory parts before starting the assisted merge
during data ingestion. This should reduce CPU usage for incoming queries,
since they need to inspect lower number of in-memory parts.
This should help https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3425
2022-12-28 14:39:24 -08:00
Aliaksandr Valialkin
0d41d933e9
lib/mergeset: reduce the parts threshold before starting assisted merges
...
This should improve query speed in general case.
This is a follow-up for d1af6046c7
2022-12-13 09:13:49 -08:00
Aliaksandr Valialkin
d1af6046c7
lib/{mergeset,storage}: do not block small merges by pending big merges - assist with small merges instead
...
Blocked small merges may result into big number of small parts, which, in turn,
may result in increased CPU and memory usage during queries, since queries need to inspect
all the existing small parts.
The issue has been introduced in 8189770c50https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
2022-12-12 17:00:50 -08:00
Aliaksandr Valialkin
d99d222f0a
lib/{storage,mergeset}: log the duration for flushing in-memory parts on graceful shutdown
2022-12-05 21:30:48 -08:00
Aliaksandr Valialkin
8189770c50
all: add -inmemoryDataFlushInterval command-line flag for controlling the frequency of saving in-memory data to disk
...
The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
2022-12-05 15:16:14 -08:00
Aliaksandr Valialkin
544ea89f91
lib/{mergeset,storage}: add start background workers via startBackgroundWorkers() function
2022-12-04 00:01:04 -08:00
Aliaksandr Valialkin
33dda2809b
lib/mergeset: panic when too long item is passed to Table.AddItems()
2022-12-03 23:32:16 -08:00
Aliaksandr Valialkin
cb44976716
lib/{storage,mergeset}: use a single sync.WaitGroup for all background workers
...
This simplifies the code
2022-12-03 23:03:08 -08:00
Aliaksandr Valialkin
343c69fc15
lib/{mergeset,storage}: pass compressLevel to blockStreamWriter.InitFromInmemoryPart
...
This allows packing in-memory blocks with different compression levels
depending on its contents. This may save memory usage.
2022-12-03 22:46:48 -08:00
Aliaksandr Valialkin
45299efe22
lib/{storage,mergeset}: consistency rename: `flushRaw{Rows,Items} -> flushPending{Rows,Items}
2022-12-03 22:17:46 -08:00
Aliaksandr Valialkin
ddc3d6b5c3
lib/mergeset: drop the crufty code responsible for direct upgrade from releases prior v1.28.0
...
Upgrade to v1.84.0, wait until the "finished round 2 of background conversion" message
appears in the log and then upgrade to newer release.
2022-12-03 21:17:31 -08:00
Aliaksandr Valialkin
e9636b4c69
lib/{mergeset,storage}: re-use the code for removing isInMerge flag at parts
...
Move the common code into releasePartsToMerge() method and consistently use it throughout the code.
2022-12-02 18:52:37 -08:00
Aliaksandr Valialkin
c4265322f4
lib/fs: add canOverwrite arg to WriteFileAtomically when it is allowed to overwrite the file atomically if it already exists
2022-10-26 01:07:34 +03:00
Aliaksandr Valialkin
fd7c86ae25
lib/{mergeset,storage}: simplify the code a bit after ae55ad8749
2022-10-21 14:33:03 +03:00
Aliaksandr Valialkin
150e99d403
lib/{mergeset,storage}: avoid unaligned 64-bit atomic operation panic on 32-bit platforms
...
The panic has been introduced in 68f3a02589
2022-10-20 16:25:43 +03:00
Aliaksandr Valialkin
ae55ad8749
lib/{storage,mergeset}: do not hold per-shard lock in fast path when adding per-shard items to the flush list
2022-10-17 18:01:26 +03:00
Roman Khavronenko
e96ccf3f71
lib/mergeset: follow-up after a0e7432e42 ( #3145 )
...
* lib/mergeset: follow-up after a0e7432e42
2022-09-26 16:39:56 +03:00
Aliaksandr Valialkin
ce2c07c5a7
lib/mergeset: atomically remove part dirs
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3038
2022-09-13 16:17:38 +03:00
Aliaksandr Valialkin
9f94c295ab
all: use os.{Read|Write}File instead of ioutil.{Read|Write}File
...
The ioutil.{Read|Write}File is deprecated since Go1.16 -
see https://tip.golang.org/doc/go1.16#ioutil
VictoriaMetrics needs at least Go1.18, so it is safe to remove ioutil usage
from source code.
This is a follow-up for 02ca2342ab
2022-08-21 23:52:35 +03:00
Aliaksandr Valialkin
d5df08e9c2
lib/mergeset: cleanup after de6dd1cd5a
...
Remove unused getInmemoryPart and putInmemoryPart functions
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2249
2022-08-04 18:23:01 +03:00
Aliaksandr Valialkin
de6dd1cd5a
lib/mergeset: optimize mergeInmemoryBlocks() function
...
Do not spend CPU time on converting inmemoryBlock structs to inmemoryPart structs.
Just merge inmemoryBlock structs directly.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2249
2022-07-27 23:58:05 +03:00
Aliaksandr Valialkin
ea06d2fd3c
lib/storage: stop background merge when storage enters read-only mode
...
This should prevent from `no space left on device` errors when VictoriaMetrics
under-estimates the additional disk space needed for background merge.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2603
2022-06-01 14:36:45 +03:00
Aliaksandr Valialkin
98129d4a8e
app/vmstorage: expose vm_indexdb_items_added_total and vm_indexdb_items_added_size_bytes_total counters at /metrics page
...
These counters can be used for monitoring the rate of addition of new entries in indexdb (aka inverted index).
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2471
2022-04-21 13:18:39 +03:00
Aliaksandr Valialkin
a96eb16329
lib/memory: export process_memory_limit_bytes metric, which shows the amounts of memory the current process has access to
...
This metric is equivalent to `vm_available_memory_bytes`, but it has better name,
since the metric is related to a process, not VictoriaMetrics itself.
Leave `vm_available_memory_bytes` for backwards compatibility.
2022-04-07 15:23:00 +03:00
Aliaksandr Valialkin
7bad7133bc
lib/mergeset: use more rawItemsShard shards on multi-CPU systems
...
This should improve the scalability for registering of new time series on multi-CPU system
2022-04-06 19:35:55 +03:00
Aliaksandr Valialkin
c84a8b34cc
lib/mergeset: eliminate copying of itemsData and lensData from storageBlock to inmemoryBlock
...
This should improve performance when registering new time series.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2247
2022-03-03 16:46:37 +02:00
Aliaksandr Valialkin
145337792d
lib/{mergeset,storage}: properly limit cache sizes for indexdb
...
Previously these caches could exceed limits set via `-memory.allowedPercent` and/or `-memory.allowedBytes`,
since limits were set independently per each data part. If the number of data parts was big, then limits could be exceeded,
which could result to out of memory errors.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2007
2022-01-20 18:37:17 +02:00
Aliaksandr Valialkin
7275ebf91a
app/vmstorage: export vm_cache_size_max_bytes metrics for determining capacity of various caches
...
The vm_cache_size_max_bytes metric can be used for determining caches which reach their capacity via the following query:
vm_cache_size_bytes / vm_cache_size_max_bytes > 0.9
2021-12-02 10:30:43 +02:00
Aliaksandr Valialkin
ffc0ab1774
lib/{mergeset,storage}: improve the detection of the needed free space for background merge
...
This should prevent from possible out of disk space crashes during big merges.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1560
2021-08-25 09:35:44 +03:00
Aliaksandr Valialkin
f71e4d1853
lib/mergeset: limit the frequency for flushCallback calls to once per 10 seconds
...
This should improve hit ratio for tagFiltersCache when big number of new time series are constantly registered
(aka high churn rate). This, in turn, should reduce CPU usage for queries over such time series.
2021-07-06 12:17:17 +03:00
Aliaksandr Valialkin
9a83e9018d
lib/storage: properly detect free disk space shortage during data merge
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1373
2021-07-02 17:40:54 +03:00
Aliaksandr Valialkin
aa9b56a046
lib/{mergeset,storage}: reduce the number of fsync calls on data ingestion path on systems with many cpu cores
...
VictoriaMetrics maintains a buffer per CPU core for the ingested data. These buffers are flushed to disk every second.
These buffers are flushed to disk in parallel starting from the commit 56b6b893cehttps://github.com/VictoriaMetrics/VictoriaMetrics/issues/1338#issuecomment-863046999 .
This commit merges the per-CPU buffers into bigger in-memory buffers before flushing them to disk.
This should reduce the rate of fsync syscalls and, consequently, the write disk IO on systems with many CPU cores.
This should help https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1338
See also https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1244
2021-06-17 13:52:08 +03:00
Aliaksandr Valialkin
d088923aef
Revert "lib/mergeset: remove a pool for inmemoryBlock structs"
...
This reverts commit 793fe39921
2021-05-28 01:09:32 +03:00
Aliaksandr Valialkin
793fe39921
lib/mergeset: remove a pool for inmemoryBlock structs
...
The pool for inmemoryBlock struct doesn't give any performance gains in production workloads,
while it may result in excess memory usage for inmemoryBlock structs inside the pool during
background merge of indexdb.
2021-05-27 21:57:33 +03:00
Aliaksandr Valialkin
ec79abc382
lib/{mergeset,storage}: reduce the number of IFNO log messages like merged ... items across ... blocks in ... seconds
...
Log these messages if the merge takes more than 30 seconds instead of 10 seconds.
2021-05-23 14:03:21 +03:00
Aliaksandr Valialkin
87179c6839
lib/{storage,mergeset}: fix unaligned 64-bit atomic operation panic for 32-bit architectures
...
The panic has been introduced in 56b6b893ce
2021-04-27 16:41:32 +03:00
Aliaksandr Valialkin
56b6b893ce
lib/mergeset: split rows ingestion among multiple shards
...
This improves rows ingestion on systems with many CPU cores by reducing lock contention.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1244
Thanks to @waldoweng for the original idea and draft implementation at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/1243
2021-04-27 15:36:34 +03:00
Aliaksandr Valialkin
bbebdf9ba1
lib/{storage,mergeset}: remove empty directories on startup. Such directories can be left after unclean shutdown on NFS storage
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1142
2021-04-22 13:02:44 +03:00
Aliaksandr Valialkin
48656dcc38
lib/{mergeset,storage}: allow merging smaller number of small parts
...
While this may increase CPU and disk IO usage needed for background merge,
this also recudes CPU usage during queries in production. This is because
such queries tend to read recently added data and it is better to have lower number
of parts for such data in order to reduce CPU usage.
This partially reverts ebf8da3730
2021-02-21 21:28:36 +02:00
Aliaksandr Valialkin
cb96a1865b
app/vmstorage: export missing vm_cache_size_bytes metrics for indexdb and data caches
2021-02-09 00:47:00 +02:00
Aliaksandr Valialkin
ebf8da3730
lib/{storage,mergeset}: tune background merge process in order to reduce CPU usage and disk IO usage
2020-12-18 20:01:08 +02:00
Aliaksandr Valialkin
4146fc4668
all: properly handle CPU limits set on the host system/container
...
This can reduce memory usage on systems with enabled CPU limits.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/946
2020-12-08 21:07:29 +02:00
Aliaksandr Valialkin
1c669a69a8
lib/mergeset: tune the number of rawItemsBlocks to merge at once
...
512 blocks give higher ingestion performance and slightly lower memory usage
2020-11-25 21:52:52 +02:00
Aliaksandr Valialkin
8beb0da6ad
lib/{mergeset,storage}: compare errors with errors.Is()
2020-09-17 03:03:02 +03:00
Aliaksandr Valialkin
067d7c1ea1
lib/{mergeset,storage}: code prettifying
2020-09-17 02:06:31 +03:00
Aliaksandr Valialkin
e7959094f6
lib/storage: remove prioritizing of merging small parts over merging big parts, since it doesn't work as expected
...
The prioritizing could lead to big merge starvation, which could end up in too big number of parts that must be merged into big parts.
Multiple big merges may be initiated after the migration from v1.39.0 or v1.39.1. It is OK - these merges should be finished soon,
which should return CPU and disk IO usage to normal levels.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/618
2020-07-30 19:57:27 +03:00
Aliaksandr Valialkin
6f05c4d351
lib/storage: improve prioritizing of data ingestion over querying
...
Prioritize also small merges over big merges.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
2020-07-23 13:23:36 +03:00
Aliaksandr Valialkin
9224ede54f
lib/mergeset: properly calculate global metrics in UpdateStats()
...
Previously these metrics could be calculated multiple times for multiple mergeset.Table instances.
2020-07-23 00:35:13 +03:00
Aliaksandr Valialkin
d5dddb0953
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:05:11 +03:00
