Previously, default dial timeout was used for kubernetes API server connection.
This commit changes it for custom dialer used by the all VictoriaMetrics components. It has lower connection timeout (30s by default).
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7127
---------
Co-authored-by: f41gh7 <nik@victoriametrics.com>
This commit adds `metric_relabel_configs` and `relabel_configs` fields
into the `global` section of scrape configuration file.
New fields are used as global relabeling rules for the scrape targets.
These relabel configs are prepended to the target relabel configs.
This feature is useful to:
* apply global rules to __meta labels from service discovery targets.
* drop noisy labels during scrapping.
* mutate labels without affecting metrics ingested via any of push
protocols.
Related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6966
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
This commit adds Kubernetes Native Sidecar support.
It's the special type of init containers, that have restartPolicy == "Always" and continue to run after container initialization.
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7287
### Describe Your Changes
Currently, vmagent always uses a separate `http.Client` for every group
watcher in Kubernetes SD. With a high number of group watchers this
leads to large amount of opened connections.
This PR adds 2 changes to address this:
- re-use of existing `http.Client` - in case `http.Client` is connecting
to the same API server and uses the same parameters it will be re-used
between group watchers
- HTTP2 support - this allows to reuse connections more efficiently due
to ability of using streaming via existing connections.
See this issue for the details and test results -
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5971
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit eefae85450)
This PR fixes#7062
For hijacked connections, one has to read from the connection buffer,
but still write directly to the connection. Otherwise, when reading
directly from such connections, the first byte may be lost. This, in
turn corrupts the ClientHello TLS handshake message and when the backend
server receives it, it closes the connection and reports the following
error in the log:
```
http: TLS handshake error from 127.0.0.1:33150: tls: first record does not look
like a TLS handshake
```
The first byte may be lost because underlying HTTP request handler may
read it from the connection and put it into the buffer. As the result,
subsequent connection reads won't see that byte.
- See: https://github.com/golang/go/issues/27408
- The fix is taken from : https://github.com/k3s-io/k3s/pull/6216
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
(cherry picked from commit c1cd3e85a7)
This test is very flaky and prevents other tests from running in CI.
Disabling this test should improve tests quality, since it isn't reliable anyway.
There is a ticket to fix this test - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7062
Once fixed, this test should be uncommented.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit c7569dac50)
### Describe Your Changes
It is better to show only unhealthy targets instead of all of them when
`show_only_unhealthy` filter is enabled.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3536
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit cbeb7d50e8)
Previous bugfix at 49f63b2 only partially fixed pagination host validation error.
Before this fix it was:
```
unexpected nextLink host \"management.azure.com\", expecting \"https://management.azure.com\"
```
Now we only check the `Host` without schema.
However, when Azure respond `nextLink` in `Host:Port` format, the
`nextLink` check will fail:
```
unexpected nextLink host \"management.azure.com:443\", expecting \"management.azure.com\"
```
This pull request further relaxes the checks by only checking the
`Hostname`.
---
related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6912
In the previous commit 8958cecad6
the default ports (80/443) were removed for both the `scrapeURL` and
`instance` label values for those targets without a port in
`__address__`. Different values in the `instance` label generate new
time series.
This commit reverts the changes made to the `instance` label. Now,
for those targets:
- `scrapeURL` will remain unchanged.
- The `instance` label value will include the default port.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
(cherry picked from commit e97e966f82)
* Adds custom dial func for HTTP-Connect and socks5 proxy tunnels.
Standard golang http.transport exposes GetProxyConnectHeader function,
but it doesn't allow to use separate tls config for proxy.
It also not possible to enforce HTTP-Connect with standard http lib.
* For http scrape targets, by default http.Transport.Proxy function must
be used. Since it has special case with full uri forward.
* Adds proxy.URL json methods that allow to properly copy internal
fields, like User/Password.
It should fix bug with proxy_url. When credentials specified at URL was
ignored.
* Adds tests for scrape client proxy requests
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6771
* It was necessary to add default ports for fasthttp client. After migration to the std.httpclient it's no longer needed.
* An additional configuration is required at proxy servers with implicitly set 80/443 ports to the host header (such as HA proxy.
It's expected that after upgrade __address_ label may change. But it should be rare case. 80/443 ports are not widely used at monitoring ecosystem. And it shouldn't have much impact.
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
Co-authored-by: Nikolay <nik@victoriametrics.com>
By introducing this feature, users will have the ability to customize
the sampleLimit parameter on a per-target basis, providing more
flexibility and control over the job execution behavior.
(cherry picked from commit 994796367b)
The %q formatter may result in incorrectly formatted JSON string if the original string
contains special chars such as \x1b . They must be encoded as \u001b , otherwise the resulting JSON string
cannot be parsed by JSON parsers.
This is a follow-up for c0caa69939
See https://github.com/VictoriaMetrics/victorialogs-datasource/issues/24
- Obtain IAM token via GCE-like API instead of Amazon EC2 IMDSv2 API,
since it looks like IMDBSv2 API isn't supported by Yandex Cloud
according to https://yandex.cloud/en/docs/security/standard/authentication#aws-token :
> So far, Yandex Cloud does not support version 2, so it is strongly recommended
> to technically disable getting a service account token via the Amazon EC2 metadata service.
- Try obtaining IAM token via GCE-like API at first and then fall back to the deprecated Amazon EC2 IMDBSv1.
This should prevent from auth errors for instances with disabled GCE-like auth API.
This addresses @ITD27M01 concern at https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513#issuecomment-1867794884
- Make more clear the description of the change at docs/CHANGELOG.md , add reference to the related issue.
P.S. This change wasn't tested in prod because I have no access to Yandex Cloud.
It is recommended to test this change by @ITD27M01 and @vmazgo , who filed
the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5513
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6524
- Rename GetStatDialFunc to NewStatDialFunc, since it returns new function with every call
- NewStatDialFunc isn't related to http in any way, so it must be moved from lib/httputils to lib/netutil
- Simplify the implementation of NewStatDialFunc by removing sync.Map from there.
- Use netutil.NewStatDialFunc at app/vmauth and lib/promscrape/discoveryutils
- Use gauge instead of counter type for *_conns metric
This is a follow-up for d7b5062917
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6299
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
This makes easier to read and debug these tests. This also reduces test lines count by 15% from 3K to 2.5K .
See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e .
While at it, consistently use t.Fatal* instead of t.Error*, since t.Error* usually leads
to more complicated and fragile tests, while it doesn't bring any practical benefits over t.Fatal*.
This reverts commit 5a3abfa041.
Reason for revert: exemplars aren't in wide use because they have numerous issues which prevent their adoption (see below).
Adding support for examplars into VictoriaMetrics introduces non-trivial code changes. These code changes need to be supported forever
once the release of VictoriaMetrics with exemplar support is published. That's why I don't think this is a good feature despite
that the source code of the reverted commit has an excellent quality. See https://docs.victoriametrics.com/goals/ .
Issues with Prometheus exemplars:
- Prometheus still has only experimental support for exemplars after more than three years since they were introduced.
It stores exemplars in memory, so they are lost after Prometheus restart. This doesn't look like production-ready feature.
See 0a2f3b3794/content/docs/instrumenting/exposition_formats.md (L153-L159)
and https://prometheus.io/docs/prometheus/latest/feature_flags/#exemplars-storage
- It is very non-trivial to expose exemplars alongside metrics in your application, since the official Prometheus SDKs
for metrics' exposition ( https://prometheus.io/docs/instrumenting/clientlibs/ ) either have very hard-to-use API
for exposing histograms or do not have this API at all. For example, try figuring out how to expose exemplars
via https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus .
- It looks like exemplars are supported for Histogram metric types only -
see https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus#Timer.ObserveDurationWithExemplar .
Exemplars aren't supported for Counter, Gauge and Summary metric types.
- Grafana has very poor support for Prometheus exemplars. It looks like it supports exemplars only when the query
contains histogram_quantile() function. It queries exemplars via special Prometheus API -
https://prometheus.io/docs/prometheus/latest/querying/api/#querying-exemplars - (which is still marked as experimental, btw.)
and then displays all the returned exemplars on the graph as special dots. The issue is that this doesn't work
in production in most cases when the histogram_quantile() is calculated over thousands of histogram buckets
exposed by big number of application instances. Every histogram bucket may expose an exemplar on every timestamp shown on the graph.
This makes the graph unusable, since it is litterally filled with thousands of exemplar dots.
Neither Prometheus API nor Grafana doesn't provide the ability to filter out unneeded exemplars.
- Exemplars are usually connected to traces. While traces are good for some
I doubt exemplars will become production-ready in the near future because of the issues outlined above.
Alternative to exemplars:
Exemplars are marketed as a silver bullet for the correlation between metrics, traces and logs -
just click the exemplar dot on some graph in Grafana and instantly see the corresponding trace or log entry!
This doesn't work as expected in production as shown above. Are there better solutions, which work in production?
Yes - just use time-based and label-based correlation between metrics, traces and logs. Assign the same `job`
and `instance` labels to metrics, logs and traces, so you can quickly find the needed trace or log entry
by these labes on the time range with the anomaly on metrics' graph.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5982
### Describe Your Changes
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6041
#### Added
- Added service discovery support for Vultr.
#### Docs
- `CHANGELOG.md`, `sd_configs.md`, `vmagent.md` are updated.
#### Note
- Useful links:
- Vultr API:
https://www.vultr.com/api/#tag/instances/operation/list-instances
- Vultr client SDK: https://github.com/vultr/govultr
- Prometheus SD:
https://github.com/prometheus/prometheus/tree/main/discovery/vultr
---
### Checklist
The following checks are mandatory:
- [X] I have read the [Contributing
Guidelines](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/CONTRIBUTING.md)
- [x] All commits are signed and include `Signed-off-by` line. Use `git
commit -s` to include `Signed-off-by` your commits. See this
[doc](https://git-scm.com/book/en/v2/Git-Tools-Signing-Your-Work) about
how to sign your commits.
- [x] Tests are passing locally. Use `make test` to run all tests
locally.
- [x] Linting is passing locally. Use `make check-all` to run all
linters locally.
Further checks are optional for External Contributions:
- [X] Include a link to the GitHub issue in the commit message, if issue
exists.
- [x] Mention the change in the
[Changelog](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/CHANGELOG.md).
Explain what has changed and why. If there is a related issue or
documentation change - link them as well.
Tips for writing a good changelog message::
* Write a human-readable changelog message that describes the problem
and solution.
* Include a link to the issue or pull request in your changelog message.
* Use specific language identifying the fix, such as an error message,
metric name, or flag name.
* Provide a link to the relevant documentation for any new features you
add or modify.
- [ ] After your pull request is merged, please add a message to the
issue with instructions for how to test the fix or try the feature you
added. Here is an
[example](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4048#issuecomment-1546453726)
- [x] Do not close the original issue before the change is released.
Please note, in some cases Github can automatically close the issue once
PR is merged. Re-open the issue in such case.
- [x] If the change somehow affects public interfaces (a new flag was
added or updated, or some behavior has changed) - add the corresponding
change to documentation.
Signed-off-by: Jiekun <jiekun.dev@gmail.com>
(cherry picked from commit 17e3d019d2)
This code adds Exemplars to VMagent and the promscrape parser adhering
to OpenMetrics Specifications. This will allow forwarding of exemplars
to Prometheus and other third party apps that support OpenMetrics specs.
---------
Signed-off-by: Ted Possible <ted_possible@cable.comcast.com>
(cherry picked from commit 5a3abfa041)
- Automatically reload changed TLS root CA pointed by -remoteWrite.tlsCAFile command-line flag
- Automatically reload changed TLS root CA configured via oauth2.tsl_config.ca_file option at -promscrape.config
- Document the change as a feature instead of a bug at docs/CHANGELOG.md
- Simplify the code at lib/promauth, which is responsible for reloading changed TLS root CA files.
- Simplify the usage of lib/promauth.Config.NewRoundTripper() - now it accepts the base http.Transport
instead of a callback, which can change the internal http.Transport.
- Reuse the default tls config if lib/promauth.Config doesn't contain tls-specific configs.
This should reduce memory usage a bit when tls isn't used for scraping big number of targets.
- Do not re-read TLS root CA files on every processed request. Re-read them once per second.
This should reduce CPU usage when scraping big number of targets over https.
- Do not store cert.pem and key.pem files in TestTLSConfigWithCertificatesFilesUpdate, since they can be loaded
from byte slices via crypto/tls.X509KeyPair().
- Remove obsolete comparisons of string representations for authConfig and proxyAuthConfig at areEqualScrapeConfigs().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5725
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2171
* lib/{promauth,promscrape}: automatically refresh root CA certificates after changes on disk
Added a custom `http.RoundTripper` implementation which checks for root CA content changes and updates `tls.Config` used by `http.RoundTripper` after detecting CA change.
Client certificate changes are not tracked by this implementation since `tls.Config` already supports passing certificate dynamically by overriding `tls.Config.GetClientCertificate`.
This change implements dynamic reload of root CA only for streaming client used for scraping. Blocking client (`fasthttp.HostClient`) does not support using custom transport so can't use this implementation.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: update NewRoundTripper API
Update API to allow user to update only parameters required for transport.
Add warning log when reloading Root CA failed.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: fix mutex acquire logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: replace RWMutex with regular mutex to simplify the code
- remove additional mutex used for getRootCABytes - require callee to use mutex
- replace RWMutex with regular mutex
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: refactor
- hold the mutex lock to avoid round tripper being re-created twice
- move recreation logic into separate func to simplify the code
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
