### Describe Your Changes
release notes for patches 1.15.6 - 9
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
add command-line flag `-search.inmemoryBufSizeBytes` for configuring size of in-memory buffers used by vmselect during processing of vmstorage responses. A new summary metric `vm_tmp_blocks_inmemory_file_size_bytes` is exposed to show the size of the buffer during requests processing.
The new setting can be used by experienced users to adjust memory usage by vmselect when processing
many small read requests. Instead of allocating 4MB buffers each time, vmselect can be instructed to lower
the buffer size via `-search.inmemoryBufSizeBytes`. To make the decision whether this flag needs to be adjusted
users can consult with `vm_tmp_blocks_inmemory_file_size_bytes` which shows the actual size of buffers used
during query processing.
----------
The detailed information of this PR can be found in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6851
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit cab3ef8294)
## Describe Your Changes
Add RemoteWrite Retry Controls
This PR introduces two new flags to the remote write functionality:
- remoteWrite.retryMinInterval
- remoteWrite.retryMaxTime
These flags provide finer control over the retry behavior for
remoteWrite operations, allowing users to customize the minimum interval
between retries and the maximum duration for retry attempts.
Fixes#5486.
## Checklist
- [x] The following checks are mandatory:
My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Yury Akudovich <ya@matterlabs.dev>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Adds a link to the API example section that describes how to delete
metrics on VM Single.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
This change is made in attempt to reduce memory usage by vmalert when
parsing big instant responses from VM/Prometheus.
In
a5c427bac4
vmalert switched from std json lib to fastjson lib in order to reduce
amount of allocations, as according to highloaded profiles of vmalert
the CPU is mostly spent on GC.
But switching to fastjson resulted into excessive memory usage for cases
when vmalert has to parse long json lines, which usually happens when
instant response contains many `metric` objects.
In this change we do a mixed parsing:
1. Slice of `metric` objects is parsed with std lib to keep mem low
2. Each `metric` object is parsed with fastjson to reduce allocs
The benchmark results are the following:
```
pkg: github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource
BenchmarkParsePrometheusResponse/Instant_std+fastjson-10 1760 668959 ns/op 280147 B/op 5781 allocs/op
MBs allocated at heap: 493.078392
mallocs: 18655472
BenchmarkParsePrometheusResponse/Instant_fastjson-10 6109 198258 ns/op 172839 B/op 5548 allocs/op
MBs allocated at heap: 1056.384464
mallocs: 34457184
BenchmarkParsePrometheusResponse/Instant_std-10 1287 950987 ns/op 451677 B/op 9619 allocs/op
MBs allocated at heap: 580.802976
mallocs: 13351636
```
The benchmark function code with mem measurement is available here
https://gist.github.com/hagen1778/b9c3ca7f8ca7d6b21aec9777112c5810
The benchmark contains 3 results:
1. Instant_std+fastjson is the implementation in this change
2. Instant_fastjson-10 is the implementation from
a5c427bac4
3. BenchmarkParsePrometheusResponse/Instant_std-10 is implementation
before
a5c427bac4
According to these results, this new implementation is slower than
previous, but faster than before switching to fastjson. It also has
lower number of allocations and roughly the same memory allocation on
heap with GC turned off.
---------
Other changes:
1. rm BenchmarkMetrics as it doesn't measure anything
2. simplify BenchmarkParsePrometheusResponse into
BenchmarkPromInstantUnmarshal
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Moving key-concepts-related docs to a separate dir should make it easier
to navigate in `docs/` folder and helps to avoid adding prefixes to
image assets.
-----------
The change shouldn't have any visual changes or changes to the links.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Moving changelog-related docs to a separate dir should make it easier to
navigate in `docs/` folder.
-----------
The change shouldn't have any visual changes or changes to the links.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Forcefully set permissions for release binaries to 1000:1000. This helps
to avoid issues such as
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6788 on
systems with limitations around UID:GID configuration.
"1000" UID and GID is widely used by linux distributions for the first
user in the system.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- fix TS lint
- anomaly: remove /vmui
- anomaly: minor inspections fix
- docs: fix broken links to headings
### Describe Your Changes
Initially vmanomaly opened with `/vmui` in serverUrl, remove it.
* Adds custom dial func for HTTP-Connect and socks5 proxy tunnels.
Standard golang http.transport exposes GetProxyConnectHeader function,
but it doesn't allow to use separate tls config for proxy.
It also not possible to enforce HTTP-Connect with standard http lib.
* For http scrape targets, by default http.Transport.Proxy function must
be used. Since it has special case with full uri forward.
* Adds proxy.URL json methods that allow to properly copy internal
fields, like User/Password.
It should fix bug with proxy_url. When credentials specified at URL was
ignored.
* Adds tests for scrape client proxy requests
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6771
* It was necessary to add default ports for fasthttp client. After migration to the std.httpclient it's no longer needed.
* An additional configuration is required at proxy servers with implicitly set 80/443 ports to the host header (such as HA proxy.
It's expected that after upgrade __address_ label may change. But it should be rare case. 80/443 ports are not widely used at monitoring ecosystem. And it shouldn't have much impact.
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
Co-authored-by: Nikolay <nik@victoriametrics.com>
to allow configuring additional headers in each request to the
corresponding notifier.
Other flags like `-datasource.headers`, `-remoteWrite.headers` already
use `^^` as delimiter, it's consistent to use it in `-notifier.headers`
as well.
related https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3260
vmalert can integrate with alertmanager that supports multi-tenant by
adding tenantID header`X-Scope-OrgID` in requests.
In multitenancy, vmalert can also filter alerts which send to different
notifier addresses(or with different header settings) using
`alert_relabel_configs`.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3260
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
docs: vmanomaly - v1.15.5 patch notes
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Updated model list in Anomaly Detection Overview
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
vmselect will create `./tmp` dir under `cacheDataPath`. If
`cacheDataPath` is set to `/`, vmselect will use `/tmp`.
content under `/tmp` dir might be auto removed based on the OS
behaviour. See:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5770
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
release notes for 1.15.4 patch
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
- change links from relative to absolute under Anomaly Detection section
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
changelog updates to v1.15.3 patch of `vmanomaly`
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
small update to `data_range` parameter in uppermost config conversion
example
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
update vmanomaly docs to forthcoming release v1.15.2
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Production workload shows that it's useful optimisation.
Channel based objects pool allows to handle irregural data ingestion
requests and make memory allocations more smooth.
It's improves sync.Pool efficiency, since objects from sync.Pool removed
after 2 GC cycles. With GOGC=30 value, GC runs significantly more often.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6733
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f255800da3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
# Conflicts:
# app/vminsert/common/insert_ctx_pool.go
Describe Your Changes
When I use usePromCompatibleNaming with vmagent to process data that
needs to be formatted from different sources such as InfluxDB, I find
that it doesn’t work
However, it works in vminsert. I found that vminsert uses the
HasRelabeling method to determine whether to relabel.
```go
func HasRelabeling() bool {
pcs := pcsGlobal.Load()
return pcs.Len() > 0 || *usePromCompatibleNaming
}
```
in vmagent, the decision to relabel is determined only by
pcsGlobal.Len() > 0. However, in the applyRelabeling method, the
usePromCompatibleNaming logic is also used to determine whether to
relabel in the error handling.
```go
func (rctx *relabelCtx) applyRelabeling(tss []prompbmarshal.TimeSeries, pcs *promrelabel.ParsedConfigs) []prompbmarshal.TimeSeries {
if pcs.Len() == 0 && !*usePromCompatibleNaming {
// Nothing to change.
return tss
}
```
So I think that the logic for determining whether to relabel in vmagent
is not as expected.
Checklist
The following checks are mandatory:
[✅]My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
…eep_metric_names` options in stream aggregation config together
With aggregated data and raw data under the same metric, results would
be confusing.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
typos fix & clarity improvement of vmanomaly docs after v1.15.1 release
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Updated user management guide with new cloud content
This PR should be merged after the cloud PR
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
This helps to improve reliability of performing backups in environments
with unreliable connection and tolerate temporary errors at S3 provider
side.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6732
Default retry timeout is up to 3 minutes to make this consistent with
the same configuration for GCS:
a05317f61f/lib/backup/gcsremote/gcs.go (L70-L76)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Before, buffer growth was always x2 of its size, which could lead to
excessive memory usage when processing big amount of data.
For example, scraping a target with hundreds of MBs in response could
result into hih memory spikes in vmagent because buffer has to double
its size to fit the response. See
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6759
The change smoothes out the growth rate, trading higher allocation rate
for lower mem usage at certain conditions.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
* `sort` param is unused by the current website engine, and was present only for compatibility
with previous website engine. It is time to remove it as it makes no effect
* re-structure guides content into folders to simplify assets management
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Fixing remaining typos and missing words after v.1.15.0 updates
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
- updated docs on `vmanomaly` with v1.15.0
- additional chapters of FAQ and model pages
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
VM has different responses to equivalent queries for MetricsQL and
GraphiteQL in case of failed access to one of vmstorage node of the
cluster vmstorage nodes. For GraphiteQL, the denyPartialResponse feature
is not used, it is always true, which is not always correct (depending
on the configuration).
In the PR I have removed the hardcoded denyPartialResponse for
GraphiteQL, just like MetricsQL does.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 79008b712f)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Make `-remoteWrite.streamAggr.ignoreFirstIntervals` of array type so it could
accept multiple values which can be applied to the corresponding`-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Fix `-streamAggr.dropInputLabels` behavior when global deduplication is enabled without `-streamAggr.config`.
Previously, `-remoteWrite.streamAggr.dropInputLabels` is misapplied.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
By introducing this feature, users will have the ability to customize
the sampleLimit parameter on a per-target basis, providing more
flexibility and control over the job execution behavior.
### Describe Your Changes
fixed yaml header in a guide doc, that causes hugo build error
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
- Adds support for displaying the top 5 log streams in the hits graph,
grouping the remaining streams into an "other" label.
#6545
- Adds options to customize the graph display with bar, line, stepped
line, and points views.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
The changes are based on SEO report and supposed to improve
ranking and indexation by search engines by using prompt and unique titles
and by updating unreachable links.
It also updates links to have a simplified form and replaces relative links with absolute links
according to https://docs.victoriametrics.com/#documentation
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Adds Prometheus Grafana Alloy and vmagent to the data ingestion
protocols. Grafana Agent was not added since it has been deprecated in
favor of alloy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
https://victoriametrics.slack.com/archives/C05UNTPAEDN/p1722833182319299
Sometimes users may use the wrong (lower) version of Grafana when
setting up the VictoriaLogs datasource.
It would be good to document the requirements of Grafana versions to use
VictoriaMetrics/VictoriaLogs datasource.
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Fix a typo in docs.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
This is useful for clients which validate InfluxDB is available before
data ingestion can be started.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6653
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Added `--vm-backoff-retries`, `--vm-backoff-factor`,
`--vm-backoff-min-duration` and `--vm-native-backoff-retries`,
`--vm-native-backoff-factor`, `--vm-native-backoff-min-duration`
command-line flags to the `vmctl` app. Those changes will help to
configure the retry backoff policy for different situations.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6622
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* add a toggle button to the "Group" tab that allows users to expand or collapse all groups at once
* introduce the ability to select a key for grouping logs within the "Group" tab
* display the number of entries within each log group.
* move the Markdown toggle to the general settings panel in the upper left corner.
Changes to .ts files in vmui or vmui for logs require re-building
static files that will be included into compiled binary afterwards.
We don't update static files on each .ts change PR because it results
in too many changes and complicates review.
So we need to update these static files before the actual release.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Fixes panic if incorrect metricsql expression passed to the prettifier API.
Prettify function had misleading panic for duration expression formatting. It expected all WITH templates to be already parsed.
But WITH expression expand was removed.
Bug was introduced at e712a49898
and present at v1.98.0+ releases
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6736
Signed-off-by: f41gh7 <nik@victoriametrics.com>
* add Logo guidelines to GitHub Readme, as it may have higher chances to be viewed by users
* rm Logo guidelines from cluster version docs, as it makes no sense anymore for this page
* rm `picutre` tag from cluster version docs, as it is not used by GitHub anymore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
- replace docs in root README with a link to official documentation
- remove old make commands for documentation
- remove redundant "VictoriaMetrics" from document titles
- merge changelog docs into a section
- rm content of Single-server-VictoriaMetrics.md as it can be included from docs/README
- add basic information to README in the root folder, so it will be useful for github users
- rm `picture` tag from docs/README as it was needed for github only, we don't display VM logo at docs.victoriametrics.com
- update `## documentation` section in docs/README to reflect the changes
- rename DD pictures, as they now belong to docs/README
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The new panel will show the 99th quantile of scrape duration in seconds.
This should help identifying vmagent instances that experiences too high scraping durations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
These changes were made as part of the title transition from Managed
VictoriaMetrics to VictoriaMetrics Cloud
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
After breadcrumb was added to docs.victoriametrics.com there's no need
to specify parent page name in a title
<img width="1437" alt="Screenshot 2024-07-27 at 10 20 09"
src="https://github.com/user-attachments/assets/733f41f4-a727-4f52-a7c0-6019edf1b803">
Also added vmdocs to gitignore to avoid committing it
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Validate files specified via `-tlsKeyFile` and `-tlsCertFile` cmd-line flags on the process start-up. Previously, validation happened on the first connection accepted by HTTP server.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6608
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
This reverts commit e280d90e9a.
Reason for revert: the updated code doesn't improve the performance of table.MustAddRows for the typical case
when rows contain timestamps belonging to ptws[0].
The performance may be improved in theory for the case when all the rows belong to partiton other than ptws[0],
but this partition is automatically moved to ptws[0] by the code at lines
6aad1d43e9/lib/storage/table.go (L287-L298) ,
so the next time the typical case will work.
Also the updated code makes the code harder to follow, since it introduces an additional level of indirection
with non-trivial semantics inside table.MustAddRows - the partition.TimeRangeInPartition() function.
This function needs to be inspected and understood when reading the code at table.MustAddRows().
This function depends on minTsInRows and maxTsInRows vars, which are defined and initialized
many lines above the partition.TimeRangeInPartition() call. This complicates reading and understanding
the code even more.
The previous code was using clearer loop over rows with the clear call to partition.HasTimestamp()
for every timestamp in the row. The partition.HasTimestamp() call is used in the table.MustAddRows()
function multiple times. This makes the use of partition.HasTimestamp() call more consistent,
easier to understand and easier to maintain comparing to the mix of partition.HasTimestamp() and partition.TimeRangeInPartition()
calls.
Aslo, there is no need in documenting some hardcore software engineering refactoring at docs/CHANGLELOG.md,
since the docs/CHANGELOG.md is intended for VictoriaMetrics users, who may not know software engineering.
The docs/CHANGELOG.md must document user-visible changes, and the docs must be concise and clear for VictoriaMetrics users.
See https://docs.victoriametrics.com/contributing/#pull-request-checklist for more details.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6629
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6677
Relative links in docs are much harder to maintain in consistent state comparing to absolute links:
- It is non-trivial to figure out the proper relative link path when creating and editing docs.
- Relative links break after moving the doc files to another paths, and it is non-trivial
to figure which links are broken after that.
See also f357ee57ef , d5809f8e12 and 8cb1822b94
- Document `make docs-debug` command at https://docs.victoriametrics.com/#documentation
- Remove unneeded ROOTDIR, REPODIR and WORKDIR env vars from docs/Makefile ,
since it is documented and expected that all the Makefile commands are run from the repository root.
- Use `docker --rm` for running Docker container with local docs server, so it is automatically
removed after pressing `Ctrl+C`. This makes the container cleanup automatic.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6677
