Repeated instant queries with long lookbehind windows, which contain one of the following rollup functions,
are optimized via partial result caching:
- sum_over_time()
- count_over_time()
- avg_over_time()
- increase()
- rate()
The basic idea of optimization is to calculate
rf(m[d] @ t)
as
rf(m[offset] @ t) + rf(m[d] @ (t-offset)) - rf(m[offset] @ (t-d))
where rf(m[d] @ (t-offset)) is cached query result, which was calculated previously
The offset may be in the range of up to 1 hour.
The SECURITY label should be applied only to changes, which fix security issues.
The change at ad839aa492 adds new command-line flags, which can be used
for improving security in some cases. They do not fix any security issues.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5111
The new metric gets increased each time `-search.logQueryMemoryUsage` memory limit
is exceeded by a query. This metric should help to identify expensive and heavy queries
without inspecting the logs.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new rule for vmalert supposed to detect groups that miss their
evaulations due to slow queries.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The panel `Errors rate to Alertmanager` had `group` label filter
applied to the expression, while the metric `vmalert_alerts_send_errors_total`
doesn't have that label. This resulted into always empty results.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
fix possible missing firing states for alerting rules in replay mode
Before if one firing stage is bigger than single query request range, like rule with a big `for`, alerting rule won't able to be detected as firing.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
support `Strict-Transport-Security`, `Content-Security-Policy` and `X-Frame-Options`
HTTP headers in all VictoriaMetrics components.
The values for headers can be specified by users via the following flags:
`-http.header.hsts`, `-http.header.csp` and `-http.header.frameOptions`.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Previously url watchers for pod, service and node objects could be mistakenly closed
when service discovery was set up only for endpoints and endpointslice roles,
since watchers for these roles may start start pod, service and node url watchers
with nil apiWatcher passed to groupWatcher.startWatchersForRole().
Now all the url watchers, which belong to a particular groupWatcher, are stopped at once
when this groupWatcher has no apiWatcher subscribers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5216
The issue has been introduced in v1.93.5 when addressing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* do not print redundant error logs when failed to scrape consul or nomad target
prometheus performs the same because it uses consul lib which just drops the error(1806bcb38c/api/api.go (L1134))
- Make sure that invalid/missing TLS CA file or TLS client certificate files at vmagent startup
don't prevent from processing the corresponding scrape targets after the file becomes correct,
without the need to restart vmagent.
Previously scrape targets with invalid TLS CA file or TLS client certificate files
were permanently dropped after the first attempt to initialize them, and they didn't
appear until the next vmagent reload or the next change in other places of the loaded scrape configs.
- Make sure that TLS CA is properly re-loaded from file after it changes without the need to restart vmagent.
Previously the old TLS CA was used until vmagent restart.
- Properly handle errors during http request creation for the second attempt to send data to remote system
at vmagent and vmalert. Previously failed request creation could result in nil pointer dereferencing,
since the returned request is nil on error.
- Add more context to the logged error during AWS sigv4 request signing before sending the data to -remoteWrite.url at vmagent.
Previously it could miss details on the source of the request.
- Do not create a new HTTP client per second when generating OAuth2 token needed to put in Authorization header
of every http request issued by vmagent during service discovery or target scraping.
Re-use the HTTP client instead until the corresponding scrape config changes.
- Cache error at lib/promauth.Config.GetAuthHeader() in the same way as the auth header is cached,
e.g. the error is cached for a second now. This should reduce load on CPU and OAuth2 server
when auth header cannot be obtained because of temporary error.
- Share tls.Config.GetClientCertificate function among multiple scrape targets with the same tls_config.
Cache the loaded certificate and the error for one second. This should significantly reduce CPU load
when scraping big number of targets with the same tls_config.
- Allow loading TLS certificates from HTTP and HTTPs urls by specifying these urls at `tls_config->cert_file` and `tls_config->key_file`.
- Improve test coverage at lib/promauth
- Skip unreachable or invalid files specified at `scrape_config_files` during vmagent startup, since these files may become valid later.
Previously vmagent was exitting in this case.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959
c9375cac5e
Descriptions were updated in attempt to make it more clear for readers,
re-phrasing and linking missing docs.
`eval_delay` was added to tests to verify it can be unmarshalled.
`eval_delay` is now applied before timestamp alignment to make it more predictable.
Before, if delay < interval the timestamp won't be aligned.
`eval_delay` and `eval_offset` was added to API output.
`PreviouslySentSeriesToRW` converted to private `previouslySentSeriesToRW`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Using `min_over_time` should reduce the amount of false positives when
component is running in near-the-threshold state. Now it should trigger
only if all collected samples were above the threshold on 10m interval.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: limit the number of parallel workers by 32
The change should improve performance and memory usage during query processing
on machines with big number of CPU cores. The number of parallel workers for
query processing is controlled via `-search.maxWorkersPerQuery` command-line flag.
By default, the number of workers is limited by the number of available CPU cores,
but not more than 32. The limit can be increased via `-search.maxWorkersPerQuery`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
- The `-search.maxWorkersPerQuery` command-line flag doesn't limit resource usage,
so move it from the `resource usage limits` to `troubleshooting` chapter at docs/Single-server-VictoriaMetrics.md
- Make more clear the description for the `-search.maxWorkersPerQuery` command-line flag
- Add the description of `-search.maxWorkersPerQuery` to docs/Cluster-VictoriaMetrics.md
- Limit the maximum value, which can be passed to `-search.maxWorkersPerQuery`, to GOMAXPROCS,
because bigger values may worsen query performance and increase CPU usage
- Improve the the description of the change at docs/CHANGELOG.md. Mark it as FEATURE instead of BUGFIX,
since it is closer to a feature than to a bugfix.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* fix inconsistent behaviors with prometheus when scraping
1. address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4959. skip job with wrong syntax in `scrape_configs` with error logs instead of exiting;
2. show error messages on vmagent /targets ui if there are wrong auth configs in `scrape_configs`, previously will print error logs and do scrape without auth header;
3. don't send requests if there are wrong auth configs in:
1. vmagent remoteWrite;
2. vmalert datasource/remoteRead/remoteWrite/notifier.
* add changelogs
* address review comments
* fix ut
This can be useful in the following queries:
drop_empty_series(temperature <= 30) default 40
This query drops temperature series with all the values bigger than 30 on the selected time range,
while replacing gaps in the remaining series with 40.
The query without drop_empty_series:
(temperature <= 30) default 40
would leave all the temperature series with all the values bigger than 30 on the selected time range,
and replace all their values with 40. This is not what could be epxected in some cases
like here - https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5071
* fixed error when creating a full backup using the `-origin` flag (#5144)
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Reduce vertical space usage, so more information is available on the screen without the need to scroll.
- Show information for lines with higher values at the top of the legend under the graph.
This should simplify graph analysis when it contains many lines.
Fix vminsert/vmstorage/vmselect metrics filtering when dashboard is used
to display data from many sub-clusters with unique job names.
Before, only one specific job could have been accounted for component-specific panels,
instead of all available jobs for the component.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
reduce lock contention for heavy aggregation requests
previously lock contetion may happen on machine with big number of CPU due to enabled string interning. sync.Map was a choke point for all aggregation requests.
Now instead of interning, new string is created. It may increase CPU and memory usage for some cases.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5087
* vmalert: add `query_time_alignment` for rule group
1. add `eval_alignment` attribute for group which by default is true. So group rule query stamp will be aligned with interval and propagated to ALERT metrics and the messages for alertmanager;
2. deprecate `datasource.queryTimeAlignment` flag.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5049
Strip sensitive information such as auth headers or passwords from datasource, remote-read,
remote-write or notifier URLs in log messages or UI. This behavior is by default and is controlled via
`-datasource.showURL`, `-remoteRead.showURL`, `remoteWrite.showURL` or `-notifier.showURL` cmd-line flags.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5044
* lib/promscrape: make concurrency control optional
Before, `-maxConcurrentInserts` was limiting all calls to `promscrape.Parse`
function: during ingestion and scraping. This behavior is incorrect.
Cmd-line flag `-maxConcurrentInserts` should have effect onl on ingestion.
Since both pipelines use the same `promscrape.Parse` function, we extend it
to make concurrency limiter optional. So caller can decide whether concurrency
should be limited or not.
This commit makes c53b5788b4
obsolete.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "dashboards: move `Concurrent inserts` panel to Troubleshooting section"
This reverts commit c53b5788b4.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: add metric `vm_promscrape_scrapes_skipped_total`
add metric `vm_promscrape_scrapes_skipped_total`to show whether vmagent skips the scrapes.
This could happen if vmagent is overloaded or target is responding too slow for configured `scrape_interval`.
The follow-up commit should add a corresponding alerting rule and panel to vmagent dashboard.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* deployment/docker: add `TooManyScrapeSkips` alerting rule for vmagent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* dashboards: add panels `Scrape duration 0.99 quantile` and `Skipped scrapes` to vmagent dashboard
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmui: update information about tsdb usage in cluster version
* vmui: cleanup
* vmui: add CHANGELOG.md
* vmui: cleanup
* vmui: update logic, move information to the visible place
* app/vmui: remove values fetch, update documentation for cardinality explorer
* app/vmui: update CHANGELOG.md
Moved because this panel is related to both: scraped and ingested data.
Before, it could have give a misleading impression that it is related to ingested metrics only.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker-compose: add vmauth to cluster env
vmauth acts as a balancer and used as an example of how to interconnect
VM components via vmauth.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docker-compose: add vmauth to cluster env
vmauth acts as a balancer and used as an example of how to interconnect
VM components via vmauth.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
`median_over_time` is handled by predefined WITH template in MetricsQL library which translates it to `quantile_over_time(0.5)`
This makes it impossble to use `median_over_time` as a usual rollup function for `aggr_over_time`.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5034
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
lib/promscrape/discovery/kubernetes: supress context.Cancelled error in logs
It is possible that context.Cancelled will appear after k8s watcher was closed due to reload(see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850).
Logging an error misinforms user and looks like vmagent discovery will stop working even though this does not affect discovery.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup: fix issue with inconsistent copying of appliedRetention.txt
appliedRetention.txt can be modified in place, so it should be always copied just the same as parts.json
Updates: https://github.com/victoriaMetrics/victoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add changelog entry for appliedRetention.txt copying fix
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* expose metrics `vmauth_config_last_reload_*` for tracking the state of config reloads, similarly to vmagent/vmalert components.
* do not print logs like `SIGHUP received...` once per configured `-configCheckInterval` cmd-line flag. This log will be printed only if config reload was invoked manually.
* prevent configuration reloading if there were no changes in config. This improves memory usage when `-configCheckInterval` cmd-line flag is configured and config has extensive list of regexp expressions requiring additional memory on parsing.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Move the bugfix description to the correct place in docs/CHANGELOG.md
- Prevent from logging of 'context canceled' errors after the url watcher is stopped,
since these errors are expected and may confuse users.
- Remove unused urlWatcher.refCount field.
- Remove unused urlWatcher.close() method.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
* lib/promscrape/discovery/kubernetes: fix leaking api watcher
goroutine which was polling k8s API had no execution control. This leaded to leaking goroutines during config reload.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4850
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: use reference counting for urlWatcher cleanup
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: remove waitgroup sync for goroutines polling API server
This is unnecessary since context will is cancelled and new requests will not be sent. Also, using waitgroup will increase time required to perform reload which might result in missed scrapes.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: clarify comment
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Apply suggestions from code review
* lib/promscrape/discovery/kubernetes: address review feedback
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/backup: force copying of parts.json
Copying of parts.json is required because `part.key()` comparison can create same key value for files with different contents. This will result in inconsistent backup being created or restored.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5005
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/backup: ensure parts.json is only copied once
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This should prevent from emitting too long lines when too long args are passed to logger.* functions.
For example, too long MetricsQL queries or too long data samples.
Adds `eval_offset` attribute for Groups.
If specified, Group will be evaluated at the exact time offset on the range of [0...evaluationInterval].
The setting might be useful for cron-like rules which must be evaluated at specific moments of time.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3409
Signed-off-by: Haley Wang <pipilong.25@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* lib/vmselectapi: do not send empty label names for labelNames request
it breaks cluster communication, since vmselect incorrectly reads request buffer, leaving unread data on it
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4932
* typo fix
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: add cardinality support for prometheus (#4320)
* docs/CHANGELOG.md: add cardinality support for prometheus
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added ability to set and clear response headers (#4825)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* app/vminsert: fixes readonly check
previously vminsert doesn't check readOnly state for vmstorage, since check was never performed for nil buffer
In this case every 30 second storage node loss readonly state and received some data.
It caused re-routing and possible slow down for ingestion
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
app/vmselect: fix panic when using `/select/multitenant` endpoint
Such requests must be rejected as not found since vmselect does not support multitenant endpoint.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker: disable provenance in buildx
it must fix an issue with multi-platform manifest generation
at buildx >= 0.10 backward compatibility was broken and generated image cannot be used with docker systems that doesn't support oci.
disabling attestat temporary fixes it.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4907https://docs.docker.com/build/attestations/slsa-provenance/
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
Initially, stream parse mode was reading data from response and parsing it on flight. This was causing longer delay to read the whole response and required increasing timeout value to allow data processing while reading. So that 908e35affd increased timeout value to fix this.
But after 74c00a8762 response in stream parse mode is saved into memory and then parsed eliminating necessity of having timeout value higher that for usual scrape.
Updates: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4847
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Retry failed write request on the closed connection immediately,
without waiting for backoff. This should improve data delivery speed
and reduce amount of error logs emitted by vmagent when using idle connections.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4139
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Re-instantinate request before retry as body could have been already spoiled.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: correctly re-instantinate HTTP req on retries
Previosly, request retry to datasource re-used existing HTTP request.
But if request object was already partially processed (body was read),
then retry will be unsuccessful.
The change re-instantinates HTTP request object before retry.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Add button to prettify query
Just capitalizes query text for now
* Add /prettify-query API handler
* Replace UI pretiffier using prettifier API
* Add showing server errors
Had to pass setQueryErrors from useFetchQuery.ts
* Use serverUrl from global AppState
* Change icon to AutoAwsome icon + added style change color when button is active
* Add sync/await to prettifyQuery function
* Doc public function for lint
* Minor async fix
* Removed extra blank lines
* Extract usePrettifyQuery hook
* Made more generic style for :active button
* Refactor usePrettifyQuery
However, prettify errors don't clean up query errors, but should
* Add prettyQuery functionality to CHANGELOG.md
* Reuse queryErrors
* Unhide errors on start
---------
Co-authored-by: Tamara <toma.vashchuk@gmail.com>
app/vmctl: don't interrupt migration process if tenant has no data
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Alexander Marshalov <_@marshalov.org>
vmagent: properly add extra labels before sending data to remote storage
labels from `remoteWrite.label` are now added to sent metrics just before they
are pushed to `remoteWrite.url` after all relabelings, including stream aggregation relabelings (#4247)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4247
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Fix display of ingested rows rate for `Samples ingested/s`
and `Samples rate` panels for vmagent's dasbhoard.
Previously, not all ingested protocols were accounted in these panels.
An extra panel `Rows rate` was added to `Ingestion` section to display the split
for rows ingested rate by protocol.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Opentelemetry format allows histograms with non-counter buckets. In this case it makes no sense to add buckets into database
and save only counter with _count suffix.
It could be used as gauge.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4814
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promrelabel: fix relabeling if clause being applied to labels outside of current context
Relabeling is applied to each metric row separately, but in order to lower amount of memory allocations it is reusing labels.
Functions which are working on current metric row labels are supposed to use only current metric labels by using provided offset, but if clause matcher was using the whole labels set instead of local metrics.
This leaded to invalid relabeling results such as one described here: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1998
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This reverts commit 252643d100.
Reason for revert: the commit incorrectly fixes the the issue.
The `remoteAddr` must be properly quoted inside lib/httpserver.GetQuotedRemoteAddr().
It isn't quoted properly if the request contains X-Forwarded-For header.
The proper fix will be included in the follow-up commit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4676
{vmagent/remotewrite,vminsert/common}: fix dropInput and keepInput flags inconsistency
Sync behavior for dropInput and keepInput flags between single-node and vmagent.
Fix vmagent not respecting dropInput flag and reverse logic for keepInput.
* rename `configErr` to `lastConfigErr` to reduce confusion
* add tests to verify metrics and msg are set properly
* fix mistake when config success metric wasn't restored after an error
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `ConcurrentFlushesHitTheLimit` could be related to components like
vminsert, vmstorage, vm-single-node and vmagent. Moving this alert
to the `health` section of alerts will be benefitial for all components
and will remove the duplicates from single/cluster alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panel supposed to show whether the number of concurrent
inserts processed by vmagent isn't reaching the limit.
The panel contains recommendation what to do if limit is reached.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Binary export API protocol can be disabled via `-vm-native-disable-binary-protocol` cmd-line flag when migrating data from VictoriaMetrics. Disabling binary protocol
can be useful for deduplication of the exported data before ingestion.
For this, deduplication need to be configured at `-vm-native-src-addr` side
and `-vm-native-disable-binary-protocol` should be set on vmctl side.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Links of form `/api/v1/<groupID>/<alertID>/status` were deprecated
in favour of `/api/v1/alerts?group_id=<>&alert_id=<>` links in
v1.79.0. See more details here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
This change removes code responsible for deprecated functionality.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Adding anchors to the 1.92 changelog breaks consistency
of navigation section at https://docs.victoriametrics.com/CHANGELOG.html
All other releases do not have subsections, so should 1.92.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: unittest support stale datapoint (#4696)"
This reverts commit 0b44df7ec8.
* Revert "docs: specify min version and limitations for vmalert's unit tests"
This reverts commit a24541bd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: init unit test (#4596)"
This reverts commit da60a68d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: mention unittest revert in changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Add -remoteWrite.shardByURL command-line flag, which instructs vmagent to spread evenly
outgoing time series data among the configured remote storage systems specified via -remoteWrite.url .
Samples for the same time series go to the same -remoteWrite.url . This allows building horizontally
scalable stream aggregation when samples for counter and histogram series must be aggregated
by the same second-level vmagent instance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4637
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
* {lib/streamaggr,vmagent/remotewrite}: breaking change for keepInput flag
Changes default behaviour of keepInput flag to write series which did not match any aggregators to the remote write.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
* lib/storage: further work on indexdb rotation optimization
- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
It is OK to add indexdb entries on demand in this function. This simplifies the code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmalert/datasource/graphite: allow overriding "from" parameter for datasource queries
Fixes construction of URL parameters for graphite render to allow overriding "from" parameter.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4685
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmalert/datasource/graphite: update flow for building URL parameters
Makes flow of building URL parameters same as Prometheus datasource has:
1) Setting all default values
2) Merging those values with provided `extraParams`
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Improve docs
- Hide `debug relabeling` column when -promscrape.dropOriginalLabels command-line flag is set
- Inline the code from the added template functions, since the code is harder to follow
with the template functions, especially when these functions have misleading names.
Also, these functions are used only in one place, e.g. they do not reduce the amounts of code.
- Hide `click to show original labels` title at `labels` column when original labels aren't available.
- Show the reason on whey original labels aren't available at /service-discovery page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4597
* app/vmagent: fix creating target id if `--promscrape.dropOriginalLabels` flag was used
* app/vmagent: hide links if OriginalLabels was dropped
* app/vmagent: update CHANGELOG.md and added information to the docs
* app/vmagent: fix comments
* feat: add page to display a list of active queries (#4598)
* app/vmagent: code formatting
* fix: remove console
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
The `a op b keep_metric_names` is ambigouos to `a op (b keep_metric_names)` when `b` is a transform or rollup function.
For example, `a + rate(b) keep_metric_names`. So it is better to use more clear syntax: `(a op b) keep_metric_names`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3710
* metricsql: add support of using keep_metric_names for binary operations
This should help to avoid confusion with queries like one in the issue #3710.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).
The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.
The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.
VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:
- If `storage/tsid` cache capacity isn't enough for active time series.
Then just increase available memory for VictoriaMetrics or reduce the number of active time series
ingested into VictoriaMetrics.
- If new time series is ingested into VictoriaMetrics. In this case it cannot find
the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
since it doesn't know that the index has no the corresponding entry too.
This is a typical event under high churn rate, when old time series are constantly substituted
with new time series.
Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.
Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.
This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.
The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.
This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .
At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685
This is a follow-up for 1f28b46ae9
* app/vmctl: fix panic `--remote-read-filter-time-start` flag not defined
* app/vmctl: update CHANGELOG.md
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
It could happen for low evaluation intervals and irregular
delays during execution that evaluation time would get
a negative offset. This could result into cumulative
discrepancy between the actual time and evaluation time for rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect: introduce `search.skipSlowReplicas` cmd-line flag
vmselect has two logical conditions during request processing when
`-replicationFactor` cmd-line flag is set:
1. If at least `len(storageNodes) - replicationFactor` responded, it could skip
waiting for the rest of nodes to respond. This could lead to problems described
here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207.
2. Mark response as partial if less than `len(storageNodes) - replicationFactor` responded
without an error.
The P1 showed itself error-prone and became the main reason why
`-replicationFactor` wasn't recommended to use at vmselect level.
However, this optimization could be still very useful in situations
when there are slow and fast replicas in cluster.
But P2 remains viable and important conditionless.
Hiding P1 behind the feature-flag `search.skipSlowReplicas`
should make `-replicationFactor` flag usable again. And let users
choose whether they want P1 to be respected.
Related issues
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207https://github.com/VictoriaMetrics/VictoriaMetrics/issues/711
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: update changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmalert: allow disabling of `step` param attached to instant queries
This might be useful for using vmalert with datasources that to not support this param,
unlike VictoriaMetrics.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4573
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix removing storage data dir before restoring from backup
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fixes after merge with `enterprise-single-node` branch
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
- Clarify the scope of the fix at docs/CHANGELOG.md
- Handle the case when -search.maxSamplesPerSeries limit is exceeded
in the same way as the -search.maxSamplesPerQuery limit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4472
The validation was needed for covering corner cases when storage is tested with data from 1970.
This resulted into unexpected search results, as year was parsed incorrectly from the given timestamp.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The change focuses on rectifying inconsistencies in the navigation behavior of the application
and eliminating issues encountered when manually altering the URL.
The key updates include:
- Refactoring of the routing mechanism to handle all possible routes and their states.
- Enhancement of the React Router usage to ensure a smoother navigation experience.
- Handling application state when the URL is manually changed.
expose `vmauth_user_request_duration_seconds`
and `vmauth_unauthorized_user_request_duration_seconds` summary metrics
for measuring requests latency per user.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
By default, vmalert will make multiple retry attempts with exponential delay.
The total time spent during retry attempts shouldn't exceed `-remoteWrite.retryMaxTime` (default is 30s).
When retry time is exceeded vmalert drops the data dedicated for `-remoteWrite.url`.
Before, vmalert dropped data after 5 retry attempts with 1s delay between attempts (not configurable).
See `-remoteWrite.retryMinInterval` and `-remoteWrite.retryMaxTime` cmd-line flags.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
vmalert: retry all errors except 4XX status codes
Retry all errors except 4XX status codes while pushing via remote-write
to the remote storage. Previously, errors like broken connection could
prevent vmalert from retrying the request.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix: optimize the preparation of data for the graph
* fix: optimize tooltip rendering
* fix: optimize re-rendering of the chart
* vmui: memory leak fix
* lib/storage: creates parts.json on start-up if it not exists.
It fixes migrations from versions below v1.90.0.
Previously parts.json was created only after successful merge.
But if merge was interruped for some reason (OOM or shutdown), parts.json wasn't created and partitions left after interruped merge weren't properly deleted.
Since VM cannot check if it must be removed or not.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336
* Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/storage/partition.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
app/vmagent/remotewrite: fix vmagent panic on shutdown
Currently, when vmagent is stopping it first flushes pending series in remote write context and proceeds to stop streaming aggregation. This leads to streaming aggregation being unable to write results into pending timeseries (since it is already nil) and panic.
This can lead to losing some aggregation results being lost almost silently.
The fix is reordering flow to first stop streaming aggregation and flush all pending time series after that.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmctl: add verbose output for docker installations or when TTY isn't available
* app/vmctl: fix tests
* app/vmctl: make vmctl interactive if no tty
* app/vmctl: cleanup
* app/vmctl: add comment
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: fix nil map assignment
The storage instance with nil map params was created for remote-read purposes.
And before change 7a9ae9de0d this map was ignored in ApplyParams.
Now, it started to be used and vmalert panics in runtime.
The fix properly inits map for at `NewVMStorage` and verifies it is not nil
on assignment in `ApplyParams`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add to changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6
The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.
There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
Possible solution - to create the new indexdb in one hour before the indexdb rotation
and to gradually pre-populate it with the needed index data during the last hour before indexdb rotation.
Then the new indexdb will contain all the needed data just after the rotation,
so it won't trigger increased CPU and disk IO.
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
- Correctly create per-day indexes if the indexdb rotation is performed during
the first hour or the last hour of the day by UTC.
Previously there was a possibility of missing index entries on that day.
- Increase the duration for creating new indexes in the current indexdb for up to 22 hours
after indexdb rotation. This should reduce the increased resource usage
after indexdb rotation.
It is safe to postpone index creation for the current day until the last hour
of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
* added backup locking/unlocking against retention policy to vmbackupmanager
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added docs for new commands
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comments
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* feat: improvement of the top queries page
* vmui/docs: enhancements to top queries page
* Apply suggestions from code review
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmui: change default font size to 14px for better readability
vmui: fix bug with missing text on buttons in safari
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* app/vmui: added Labels with the highest number of unique values
* app/vmui: cleanup
* app/vmui: cleanup
* app/vmui: add table description
* app/vmui: fix comment, updated CHANGELOG.md
* app/vmui: disable links
* app/vmui: added actions to the table, it will show values for selected label with the highest number of series
* app/vmui: fix comment
* vmalert: expand rule groups on anchor click
before, anchor click was only updating the URL.
To expand the group, user had to click on rule's block.
Now, group will toggle automatically.
* vmalert: allow filtering group in web UI
The new filter allows to filter groups and rules within
groups by: errors only or noMatch only.
The filtering supposed to help navigating big numbers of groups/rules.
Filtering is reflected in URL, so can be shared as a link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Without reset, labels duplicates could have been added during stream aggregation.
Since `ctx.Labels` is reused during processing of many series, each series will
add its labels to the context. Even if the same labels were already addeded on prev
iteration. Now, we reset `ctx.Labels` on each iteration to contain so labels from
different series didn't interfere.
This could have cause exceeding of the limit on number of labels per pushed time series.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4277
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmalert: detect alerting rules which don't match any series at all
vmalert starts to understand /query responses which contain object:
```
"stats":{"seriesFetched": "42"}
```
If object is present, vmalert parses it and populates a new field
`SeriesFetched`. This field is then used to populate the new metric
`vmalert_alerting_rules_last_evaluation_series_fetched` and to
display warnings in the vmalert's UI.
If response doesn't contain the new object (Prometheus or
VictoriaMetrics earlier than v1.90), then `SeriesFetched=nil`.
In this case, UI will contain no additional warnings.
And `vmalert_alerting_rules_last_evaluation_series_fetched` will
be set to `-1`. Negative value of the metric will help to compile
correct alerting rule in follow-up.
Thanks for the initial implementation to @Haleygo
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4056
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4039
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It appears that 90% usage for anonymous mem usage
is already concerning. So we lowering the threshold to 80%.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
When using `retentionTimezoneOffset` and having local timezone being more than 4 hours different from UTC indexdb retention calculation could return negative value. This caused indexdb rotation to get in loop.
Fix calculation of offset to use `retentionTimezoneOffset` value properly and add test to cover all legit timezone configs.
See:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4207
- https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4206
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Windows doesn't allow to remove dir with opened files. Usually it's a case for snapshots, hard cannot be removed if file is openned.
With this change, dir will be renamed and properly deleted at the next process start.
It's recommended to restart vmstorage/vmsingle for snapshots deletion completion periodically.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* lib/promscrape/discovery/kubernetes: add common labels to all ports discovered from endpoints
Sets
`__meta_kubernetes_endpoints_name` and `__meta_kubernetes_namespace` labels to all ports of pod.
Prometheus sets those labels to all ports in pod (0ab9553611/discovery/kubernetes/endpoints.go (L267C15-L269)) even if port is not matching any service.
See: #4154
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix test for updated discovery logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Properly return empty slices instead of nil for `/api/v1/rules` and `/api/v1/alerts` API handlers.
This improves compatibility with Grafana.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4221
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Supports using `**` for `-rule` and `-rule.templates`: `dir/**/*.tpl` loads contents of dir and all subdirectories recursively.
See: #4041
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Artem Navoiev <tenmozes@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/promscrape: adds filter for consul_sd_configs:
it allows advanced filtering for consul service discovery requests
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4183
* typo fix
* removes deprecation mentions since it's not relevant
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Templating of `-external.alert.source` is not expected to have access to the query which was causing runtime error when query function was passed as nil.
See: #4181
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* feat: display heatmap in the explore metrics (#4111)
* fix: correct calc step for heatmap
* fix: remove spaces in the result of getDurationFromMilliseconds
* feat: add button "show today" to date picker
* feat: add comparison with the prev day (#3967)
* vmui/docs: add comparison of data to cardinality page
* feat: add WithTemplate page
* app/vmselect/prometheus: enable json mode for expand with expr API
* app/vmselect/prometheus: enable CORS and add content type
* feat: add api for expand with templates
* fix: remove console from useExpandWithExprs
* app/vmselect/prometheus: fix escaping
* vmui: integrate WITH template
* app/vmctl: check content type instead of form param
* fix: add content-type for fetch with-exprs
* fix: add a header to the server's response that allows the "Content-Type" header
* app/vmctl: added comment and cleanup
* app/vmctl: use format query param
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
* app/vmctl: add support for the different time format in the native binary protocol
* app/vmctl: update flag description, update CHANGELOG.md
* app/vmctl: add comment to exported function
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: retry datasource requests with EOF or unexpected EOF errors
Retry failed read request on the closed connection one more time.
This may improve rules execution reliability when connection
between vmalert and datasource closes unexpectedly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix old tests
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This handler will instruct search engines that indexing is not allowed for the content exposed to the internet. This should help to address issues like #4128 when instances are exposed to the internet without authentication.
Improperly configured -bigMergeConcurrency command-line flag usually leads to uncontrolled
growth of unmerged parts, which, in turn, increases CPU usage and query durations.
So it is better deprecating this flag. In rare cases -smallMergeConcurrency command-line flag
can be used instead for controlling the concurrency of background merges.
This makes it easier to understand exact point in time which is included in this backup.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape: fix the problem with scrape work duplicates when file_sd_config can't be read
* lib/promscrape: clarified comment
* lib/promscrape: made better approach to handle a problem with growing []*ScrapeWork on each error when loading config
* lib/promscrape: added CHANGELOG.md
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: add tips for working with the graph and legend
* feat: add the ability to collapse the legend
* vmui/docs: add the ability to collapse the legend
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: check for free disk space before opening tables
We check for free disk space before call to `openTable`,
so `Storage` can be set to ReadOnly before mergeWorkers start.
Before the change, there was a chance that merges will start
even if Storage has to start in ReadOnly mode because of
`-storage.minFreeDiskSpaceBytes` limit.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4023
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: chore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update lib/storage/storage.go
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
Verifying status code helps to avoid misleading errors caused by attempt to parse unsuccessful response.
Related issue: #4034
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- Compare directory names instead of paths to directory when determining which persistent queues must be deleted
This is less error-prone solution, since paths to the same directory can differ, which could lead
to accidental directory removal for the existing -remoteWrite.url
- Log the `removed %d dangling queues` message when at least a single queue has been removed
- Consistently use filepath.Join() for creating paths to persistent queues.
This is needed for Windows support (see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70 )
- Clarify the description of the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4014
- Allocate and initialize seriesByWorkerID slice in a single go instead
of initializing every item in the list separately.
This should reduce CPU usage a bit.
- Properly set anti-false sharing padding at timeseriesWithPadding structure
- Document the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3966
* allowed using dashes and dots in environment variables names for templating config files with envtemplate (#3999)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* Apply suggestions from code review
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/netutil: log only parsing errors for proxy-protocol
Previosly every error was logged. With configured TCP health checks at load-balancer or kubernetes, vmauth spams a lot of false positive error message into logs
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/netutil/tcplistener.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>