Previously, for `^` aka pow function calls, VictoriaMetrics returned `1`
if left arg was Nan. For example, given query=`(hour()==2)^1` returns 1
for NaN produced by hour() == 2 function. It added additional non-exist
datapoints to the timeseries.
This commit port bugfix from `metricql` package and adds test for it.
Now, VictoriaMetrics
correctly returns `NaN` for such cases.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7359
Signed-off-by: f41gh7 <nik@victoriametrics.com>
(cherry picked from commit bb399518db)
Previously, dedup was added as a downsampling rule with 0s offset to all downsmapling rules with filters. That enforced a metric name lookup even in cases it is not needed.
For example, the following configuration: `-dedup.minScrapeInterval=10s -downsampling.period={__name__=~"node.*"}:1h:1m` would be parsed as: `{__name__=~"node.*"}:1h:1m {}:0s:10s`
This commit changes this logic and treats dedup as a separate case. This allows to perform metric name lookups only in cases when timestamp of current partition can be eligible to use some of downsampling filters. Newer parts will not trigger metric name lookup and will apply deduplication directly.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7440
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
After changes at commit 787b9cd. Minimal timestamps for extDB check was performed without context of the index search prefix.
It worked fine for Single node version, but for cluster version a different prefix was used for
metricID search requests. It may lead to incomplete results, if minimal missing timestamp was cached
for the tenant with different ingestion patterns.
Minimal reproducible case is:
- metrics were ingested for tenants 0 and 1
- at some point in time metrics ingestion for tenant 1 stopped
- index records have the following timestamps layout:
tenant 0: 1,2,3,4,5,6
tenant 1: 1,2,3,4
- after indexDB rotation, containsTimeRange lookups may produce
incorrect results:
time range request for tenant 1 - 5:6 caches 5 as min timestamp
request for the same or smaller time range for tenant 0 now returns
empty results.
Second case:
- requests for the tenant without metrics always updates atomic value with incorrect minimal time range for other tenants.
This commit replaces single atomic with map of search prefix keys. It should have slight performance overhead,
but work consistently for cluster version. minMissingTimestamp is cached by prefix search key, which included tenantID.
Since it will be only populated at runtime, it doesn't hold unused tenants for queries.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7417
This commit fixes panic for multitenant requests and empty storage node responses for tenants api.
It also optimizes `populateSqTenantTokensIfNeeded` function calls, by making it only once for query request. Previously it was incorrectly called multiple times per each storage node request.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7549
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
The following user-level options must be unconditionally inherited by url_map, since this is what most users expect:
- retry_status_codes
- load_balancing_policy
- drop_src_path_prefix_parts
- discover_backend_ips
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7519
Previously, vmauth could have pick `buMin` as least loaded backend
without checking its status. In result, vmauth could have respond to the
user with an error even if there were healthy backends. That could
happen if healthy backends already had non-zero amount of concurrent
requests executing at the moment of least-loaded backend choosing logic.
Steps to reproduce:
1. Setup vmauth with two backends: healthy and non-healthy
2. Execute a bunch of concurrent requests against vmauth (i.e. Grafana
dash reload)
3. Observe that some requests will fail with message that all backends
are unavailable
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
---
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a0a154511a)
Previously it incorrectly applied xFilesFactor, if it's value equal to 0.
This commit properly handles this case and returns result according to
the graphite documentation:
`xFilesFactor follows the same semantics as in Whisper storage schemas. Setting it to 0 (the default) means that only a single value in the series needs to be non-null for it to be considered non-empty, setting it to 1 means that all values in the series must be non-null. A setting of 0.5 means that at least half the values in the series must be non-null.`
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Evgeniy Negriy <einegriy@avito.ru>
(cherry picked from commit d27dfac5c6)
### Describe Your Changes
I don't like this solution, but it works. Other possible solutions
described in an issue
fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7068
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a88f896b43)
### Describe Your Changes
Fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7301
When querying with condition like `WHERE a=1` (looking for series A),
InfluxDB can return data with the tag `a=1` (series A) and data with the
tag `a=1,b=1` (series B).
However, series B is will be queried later and it's data should not be
combined into series A's data.
This PR filter those series that are not identical to the original query
condition.
For table `example`:
```
// time host region value
// ---- ---- ------ -----
// 2024-10-25T02:12:13.469720983Z serverA us_west 0.64
// 2024-10-25T02:12:21.832755213Z serverA us_west 0.75
// 2024-10-25T02:12:32.351876479Z serverA 0.88
// 2024-10-25T02:12:37.766320484Z serverA 0.95
```
The query for series A (`example_value{host="serverA"}`) and result will
be:
```SQL
SELECT * FROM example WHERE host = "serverA"
```
```json
{
"results": [{
"statement_id": 0,
"series": [{
"name": "cpu",
"columns": ["time", "host", "region", "value"],
"values": [
["2024-10-25T02:12:13.469720983Z", "serverA", "us_west", 0.64],
["2024-10-25T02:12:21.832755213Z", "serverA", "us_west", 0.75],
["2024-10-25T02:12:32.351876479Z", "serverA", null, 0.88],
["2024-10-25T02:12:37.766320484Z", "serverA", null, 0.95]
]
}]
}]
}
```
We need to abandon `values[0]` and `values[1]` because the value of
**unwanted** column `region` is not null.
As for series B (`example_value{host="serverA", region="us_west"}`), no
change needed since the query filter out unwanted rows already.
### Note
This is a draft PR for verifying the fix.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f16a58f14c)
### Describe Your Changes
Add puppetdb sd to changelog of `v1.106.0` version.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 11d735a91f)
### Describe Your Changes
Christmas is early and you get the first present in the shape of
spelling fixes.
Sorry for the big amount :)
### Checklist
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 2e8f420d84)
- remove reference to sparse cache as it was reverted in 9f9cc24e4c
- add reference to 1.102.6 and 1.97.11 LTS releases
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit a3401c8d64)
Previously vmgateway returned error for the requests with multitenant
tenant.
This commit allows to rate limit multitenant requests and apply global
rate limit for it.
Currently it supports only queries for rate limiting.
Related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7201
This commit also addresses gateway start-up crash if datasource.url is not accessible.
Previously vmgateway could crash at start-up with enabled rate limiting if datasource for metrics
was not avaiable for any reason. It seems, that crash is expected. But in fact it's not. For instance, datasource could be in restart phase.
Replaces crash with log message error. It increased availability of vmgateway component.
Signed-off-by: f41gh7 <nik@victoriametrics.com>
This commit adds `metric_relabel_configs` and `relabel_configs` fields
into the `global` section of scrape configuration file.
New fields are used as global relabeling rules for the scrape targets.
These relabel configs are prepended to the target relabel configs.
This feature is useful to:
* apply global rules to __meta labels from service discovery targets.
* drop noisy labels during scrapping.
* mutate labels without affecting metrics ingested via any of push
protocols.
Related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6966
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3f0e2ab3b2)
Reopening PR #7373 from a branch in VictoriaMetrics repo in order to
enable edits and rebase.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 683f8c2780)
It is possible for in-memory part to be empty if ingested samples are
removed by retention filters. In this case, data will not be discarded
due to retention before creating in memory part. After in-memory parts
merge samples will be removed resulting in creating completely empty
part at destination.
This commit checks for resulting part and skips it, if it's empty.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
### Describe Your Changes
Fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7334
available disk space should be
```
(vm_free_disk_space_bytes{job=~...} - vm_free_disk_space_limit_bytes{job=~...})
```
instead of
```
vm_free_disk_space_bytes{job=~...}
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
This commit adds Kubernetes Native Sidecar support.
It's the special type of init containers, that have restartPolicy == "Always" and continue to run after container initialization.
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7287
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7182
- add a separate index cache for searches which might read through large
amounts of random entries. Primary use-case for this is retention and
downsampling filters, when applying filters background merge needs to
fetch large amount of random entries which pollutes an index cache.
Using different caches allows to reduce effect on memory usage and cache
efficiency of the main cache while still having high cache hit rate. A
separate cache size is 5% of allowed memory.
- reduce size of indexdb/dataBlocks cache in order to free memory for
new sparse cache. Reduced size by 5% and moved this to a separate cache.
- add a separate metricName search which does not cache metric names -
this is needed in order to allow disabling metric name caching when
applying downsampling/retention filters. Applying filters during
background merge accesses random entries, this fills up cache and does
not provide an actual improvement due to random access nature.
Merge performance and memory usage stats before and after the change:
- before
- after
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit 837d0d136d)
Fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7309
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5fecb77f69)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Auto-adjust `-remoteWrite.concurrency` cmd-line flags with the number of
available CPU cores in the same way as vmagent does. With this change
the default behavior of vmalert in high-loaded installation should
become more resilient. This change also reduces
`-remoteWrite.flushInterval` from `5s` to `2s` to provide better data
freshness.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
This commit properly adds `group_name` and `file` fields for recording rules web api response at `/api/v1/rules`.
Previously these fields were blank.
Related issue https://github.com/victoriaMetrics/victoriaMetrics/issues/7297
Signed-off-by: Antoine Deschênes <antoine.deschenes@linux.com>
### Describe Your Changes
Add support for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6930
Calculate `-search.maxUniqueTimeseries` by
`-search.maxConcurrentRequests` and remaining memory if it's **not set**
or **less equal than 0**.
The remaining memory is affected by `-memory.allowedPercent`,
`-memory.allowedBytes` and cgroup memory limit.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Group
[sleeps](daa7183749/app/vmalert/rule/group.go (L320))
random duration before start the evaluation, and during the sleep,
`g.updateCh <- new` will be blocked since there is no `<-g.updateCh`
waiting.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit c4fe23794a)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously unit `m` is not correctly supported.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
If a dict flag has only one value without a prefix it is supposed to
replace default value.
Previously, when flag was set to `-flag=2` and the default value in
`NewDictInt` was set to 1 the resulting value for any `flag.Get()` call
would be 1 which is not expected.
This commit updates default value for the flag in case there is only one
entry for flag and the entry is a number without a key.
This affects cluster version and specifically `replicationFactor` flag
usage with vmstorage [node
groups](https://docs.victoriametrics.com/cluster-victoriametrics/#vmstorage-groups-at-vmselect).
Previously, the following configuration would effectively be ignored:
```
/path/to/vmselect \
-replicationFactor=2 \
-storageNode=g1/host1,g1/host2,g1/host3 \
-storageNode=g2/host4,g2/host5,g2/host6 \
-storageNode=g3/host7,g3/host8,g3/host9
```
Changes from this PR will force default value for `replicationFactor`
flag to be set to `2` which is expected as the result of this
configuration.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
