For liquid text processor double braces `{{` `}}`
are special chars for templating.
Since we use them in some of our docs with different purpose,
we must escape them to avoid syntax errors from liquid.
For escaping curly braces we use bult-in plugin which helps
to enclose sections of text via `{% raw %}` and `{% endraw %}`.
This approach prevents liquid syntax errors and makes render correct.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Rules executor within group tracks series sent to remote write
in order to mark them as stale if they had disappeared in next
evaluation round.
The executor uses rules ID as a key to identifies series which belong to rule.
On config reload, executor remains active but the set of rules could change.
Hence, we need to properly cleanup the tracker for rules which has been disappeared
on config reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: calculate time for firing alert based on the given timestamp
Previously, current time was used for checking the `firing` threshold.
This is not correct, since alerts are evaluated at specific timestamps.
Hence, this specific timestamp supposed to be used in the calculation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly calculate evaluation timestamp for rules
Timestamp for rules evaluation should be calculated after
the artifical delay for groups start. Otherwise, evaluation
timestamp can fall back too far in time.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Function `ValidateTemplates`, used on the vmalert startup,
is supposed to check whether used templates and functions
in loaded rules are correct. The function was parsing
and executing loaded templates.
However, rules may contain functions which can't be executed
without values (label values or query results), like `slice`.
Because of this, validation for completely valid expression
`{{ slice $labels.job 9 }}` will fail since `$labels.job`
is empty during validation.
This PR updates `ValidateTemplates` function to only parse
templates without executing them.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2514
Signed-off-by: hagen1778 <roman@victoriametrics.com>
add progress bars to the VM importer
The new progress bars supposed to display the processing speed per each
VM importer worker. This info should help to identify if there is a bottleneck
on the VM side during the import process, without waiting for its finish.
The new progress bars can be disabled by passing `vm-disable-progress-bar` flag.
Plotting multiple progress bars requires using experimental progress bar pool
from github.com/cheggaaa/pb/v3. Switch to progress bar pool required changes
in all import modes.
The openTSDB mode wasn't changed due to its implementation, which implies individual progress
bars per each series. Because of this, using the pool wasn't possible.
Signed-off-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Before, relabeling for notifier configured via file was supported
only for target labels discovered via SD.
With this change, new config field `alert_relabel_configs` is introduced
for applying relabeling to labels of sent alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
To improve compatibility with Prometheus alerting the order of
templates processing has changed.
Before, vmalert did all labels processing beforehand. It meant
all extra labels (such as `alertname`, `alertgroup` or rule labels)
were available in templating. All collisions were resolved in favour
of extra labels.
In Prometheus, only labels from the received metric are available in
templating, so no collisions are possible.
This change makes vmalert's behaviour similar to Prometheus.
For example, consider alerting rule which is triggered by time series
with `alertname` label. In vmalert, this label would be overriden
by alerting rule's name everywhere: for alert labels, for annotations, etc.
In Prometheus, it would be overriden for alert's labels only, but in annotations
the original label value would be available.
See more details here https://github.com/prometheus/compliance/issues/80
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new flag `datasource.disableKeepAlive` allows disabling keepalive
connections. This may be useful if there are multiple datasource
replicas (e.g. vmselects) behind the HTTP balancer to avoid uneven
load spread because of long-lived connections.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Executor recently gain field for storing previously sent series.
Since the same executor object can be used in multiple goroutines,
the access to this field should be serialized.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: split alert's `Start` field into `ActiveAt` and `Start`
The `ActiveAt` field identifies when alert becomes active for rules
with `for > 0`. Previously, this value was stored in field `Start`.
The field `Start` now identifies the moment alert became `FIRING`.
The split is needed in order to distinguish these two moments
in the API responses for alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: support specific moment of time for rules evaluation
The Querier interface was extended to accept a new argument
used as a timestamp at which evaluation should be made.
It is needed to align rules execution time within the group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: mark disappeared series as stale
Series generated by alerting rules, which were sent to remote write
now will be marked as stale if they will disappear on the next
evaluation. This would make ALERTS and ALERTS_FOR_TIME series
more precise.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: evaluate rules at fixed timestamp
Before, time at which rules were evaluated was calculated
right before rule execution. The change makes sure
that timestamp is calculated only once per evalution round
and all rules are using the same timestamp.
It also updates the logic of resending of already resolved
alert notification.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: allow overridin `alertname` label value if it is present in response
Previously, `alertname` was always equal to the Alerting Rule name. Now,
its value can be overriden if series in response containt the different value
for this label.
The change is needed for improving compatibility with Prometheus.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: align rules evaluation in time
Now, evaluation timestamp for rules evaluates as if
there was no delay in rules evaluation. It means, that
rules will be evaluated at fixed timestamps+group_interval.
This way provides more consistent evaluation results and
improves compatibility with Prometheus,
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add metric for missed iterations
New metric `vmalert_iteration_missed_total` will show
whether rules evaluation round was missed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: reduce delay before the initial rule evaluation in group
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: rollback alertname override
According to the spec:
```
The alert name from the alerting rule (HighRequestLatency from the example above) MUST be added to the labels of the alert with the label name as alertname. It MUST override any existing alertname label.
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-3
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: throw err immediately on dedup detection
```
The execution of an alerting rule MUST error out immediately and MUST NOT send any alerts
or add samples to samples receiver if there is more than one alert with the same labels
```
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md#step-4
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: cleanup
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: use strings builder to reduce allocs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support of `resendDelay` flag for alerts
Co-authored-by: dmitryk-dk <dmitry.kozlov@brightlocal.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add support for `sortByLabel` template function
* vmalert: update API according to Prometheus conformance program
The changes to the API, field names and URL path has been made
according to the Prometheus specification for `alert_generator`
https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
* vmalert: fix the timestamp of the evaluated rules
The timestamp used for alert's `EndsAt` was calculated
before sending the notification. While the correct way
is to use the timestamp taken right before rules evaluation.
* vmalert: add `-datasource.queryTimeAlignment` flag
The flag is supposed to provide ability to disable `time`
param alignment when executing rules. By default, this flag
is enabled, so it remains backward compatible.
The flag was introduced to achieve better compatibility
with Prometheus behaviour according to https://github.com/prometheus/compliance/blob/main/alert_generator/specification.md
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/discovery/consul: update services on the watcher's start
Previously, watcher's start was only initing goroutines for discovery
but not waiting for the first iteration to end. It means first Consul
discovery wasn't returning discovered targets until the next iteration.
The change makes the watcher's start blocking until we get first discovery
iteration done and all registries updated.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: remove workarounds for consul SD
Now when consul SD lib properly updates services
on the first start, we don't need workarounds in vmalert.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/discovery/consul: update after review
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
The change allows to specify duration values like `1d`, `1w`
for fields `scrape_interval`, `scrape_timeout`, etc.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/817#issuecomment-1033384766
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/blockcache: make linter happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/promscrape: support prometheus-like duration in scrape configs
* add support for extra fields `scrape_align_interval` and `scrape_offset`;
* support Prometheus duration parsing for `__scrape_interval__`
and `__scrape_duration__` labels;
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
* wip
* docs/CHANGELOG.md: document the feature
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* Mention about the ability to configure vmalert notifiers via files in docs/CHANGELOG.md
* Mention about the ability to use Consul service discovery for vmalert notifiers in docs/CHANGELOG.md
* Run `make docs-sync` in order to sync app/vmalert/README.md to docs/vmalert.md
vmalert: support configuration file for notifiers
* vmalert notifiers now can be configured via file
see https://docs.victoriametrics.com/vmalert.html#notifier-configuration-file
* add support of Consul service discovery for notifiers config
see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1947
* add UI section for currently loaded/discovered notifiers
* deprecate `-rule.configCheckInterval` in favour of `-configCheckInterval`
* add ability to suppress logs for duplicated targets for notifiers discovery
* change behaviour of `vmalert_alerts_send_errors_total` - it now accounts
for failed alerts, not HTTP calls.
* vmalert: check if remoteWrite is configured for replay mode
The purpose of `replay` mode is to backfill results of recording
or alerting rules. So `remoteWrite.url` should be required.
Otherwise, process can fail on attempt to send data.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update app/vmalert/main.go
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
When using `vmalert` with older Prometheus versions, the passed
`step=2m` may be parsed by Prometheus with an err: "cannot parse \"2m0s\" to a valid duration".
In order to improve compatibility vmalert will always convert step duration to seconds.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1943
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Service labels like `alertname` or `alertgroup` were attached
after template expanding for `labels` section. Because of this,
labels `alertname` or `alertgroup` weren't available for templating
in `labels` section of alert's definition.
This commit changes the order of labels attaching and adds a test
for verifying these labels availability.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1921
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: introduce additional HTTP URL params per-group configuration
The new group field `params` allows to configure custom HTTP URL params
per each group. These params will be applied to every request before
executing rule's expression. Hot config reload is also supported.
Field `extra_filter_labels` was deprecated in favour of `params` field.
vmalert will print deprecation log message if config file contains
the deprecated field.
`params` fields are supported by both Prometheus and Graphite datasource types.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: provide more examples for `params` field
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: set higher priority for `params` setting
If there would be a conflict between URL params set in `datasource.url` flag
and params in group definition the latter will have higher priority.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The bump was required for `vmalert` package.
`vmalert` docs now also contain an updated description.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, vmalert would print an err message and set vmalert_config_last_reload_successful=0
only once during a hot reload of a bad config. Such behaviour may result into non noticed
event of a bad config reload attempt
Now, it continues to print error messages and keep vmalert_config_last_reload_successful state
until successful attempt will be made or config state will be rolled back to prev state.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For a long time notifier.Addr flag was required. The assumption was that vmalert will
be always used for alerting. However, practice shows that some users need only
recording rules. In this case, requirement of notifier.Addr is ambigious.
The change verifies if loaded config contains recording or alerting rules and
if there are corresponding flags set. This is true for initial config load
and hot reload.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This removes the unneeded level of indirection and improves code readability.
The "prometheus" and "graphite" constants aren't going to change in the future, so there is no sense in hiding them behind constants.
Previously only the lower part of 64-bit hash was used for calculating the offset.
This may give uneven distribution in some cases. So let's use all the available 64 bits from the hash
for calculating the offset.
Prometheus allows to have groups with no rules, so we should support
it in vmalert as well for compatibility reasons.
It is also allowed to hot-reload empty groups by adding or removing rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously, ID for alert entity was generated without alertname or groupname.
This led to collision, when multiple alerting rules within the same group
producing same labelsets. E.g. expr: `sum(metric1) by (job) > 0` and
expr: `sum(metric2) by (job) > 0` could result into same labelset `job: "job"`.
The issue affects only UI and Web API parts of vmalert, because alert ID is used
only for displaying and finding active alerts. It does not affect state restore
procedure, since this label was added right before pushing to remote storage.
The change now adds all extra labels right after receiving response from the datasource.
And removes adding extra labels before pushing to remote storage.
Additionally, change introduces a new flag `Restored` which will be displayed in UI
for alerts which have been restored from remote storage on restart.
Commit fixes potential race condition when group update
and generating of ID() happens simultaneously.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Regression was introduced during code refactoring. It potentially
could lead to situation when SIGHUP signals were ignored while
vmalert was still busy with initing group manager.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The extra `/` may cause issues when additional path prefixes
are configured. Also, removing it makes it consistent
with the rest of declarations.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `datasource.maxIdleConnections` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmauth: adjust `http.Transport.MaxIdleConns` value accordingly to `http.Transport.MaxIdleConnsPerHost`
`http.Transport.MaxIdleConnsPerHost` setting is controlled by `maxIdleConnsPerBackend` flag,
while `http.Transport.MaxIdleConns` is inherited from DefaultTransport and is equal to `100`.
The fix adjusts `http.Transport.MaxIdleConns` value if it is lower than `http.Transport.MaxIdleConnsPerHost`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The source link is controlled by `external.url` and `external.alert.source`
flags, in the same way as for alertmanager notifications.
The source link is added to Alerts list view, and specific Alert view.
`omitempty` tag resulted into skipping this param on marshaling,
which was used as a checksum for groups configuration. Since on
config reload checksums are compared before applying changes,
any change to `interval` only didn't trigger config reload.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1641
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add flag to limit the max value for auto-resovle duration for alerts
The new flag `rule.maxResolveDuration` suppose to limit max value for
alert.End param, which is used by notifiers like Alertmanager for alerts auto resolve.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1586
New UI pages:
/ - welcome page with API handlers list;
/groups - list of all rules per group;
/alerts - list of all active alerts;
/groupID/alertID/status - status of the active alert;
* vmalert: allow extra GET params in datasource package
ExtraParams will be added as GET params to every HTTP request made by datasource.
The `roundDigits` param, for example, was substituted by corresponding extra param.
* vmalert: add nocache=1 param for replay process
The `nocache=1` param is VictoriaMetrics specific parameter which prevents it
from caching and boundaries aligning for queries. We set it to avoid cache
pollution in `replay` mode and also to avoid unnecessary time range boundaries
alignment.
* vmalert: mention nocache=1 in replay description
* vmalert: fix bug with unused param
* vmalert: remove `vmalert_execution_duration_seconds` metric
The summary for `vmalert_execution_duration_seconds` metric gives no additional
value comparing to `vmalert_iteration_duration_seconds` metric.
* vmalert: update config reload success metric properly
Previously, if there was unsuccessfull attempt to reload config and then
rollback to previous version - the metric remained set to 0.
* vmalert: add Grafana dashboard to overview application metrics
* docker: include vmalert target into list for scraping
* vmalert: extend notifier metrics with addr label
The change adds an `addr` label to metrics for alerts_sent and alerts_send_errors
to identify which exact address is having issues.
The according change was made to vmalert dashboard.
* vmalert: update documentation and docker environment for vmalert's dashboard
Mention Grafana's dashboard in vmalert's README in a new section #Monitoring.
Update docker-compose env to automatically add vmalert's dashboard.
Update docker-compose README with additional info about services.
* vmalert: allow to disable automatically added path to remote write address via disablePathAppend flag
* docs: update docs to include remoteWrite.disablePathAppend
* vmalert: expose new metrics for tracking number of produced samples during last evaluation
Two new metrics were added to track the number of samples produced during the last evaluation:
* vmalert_recording_rules_last_evaluation_samples
* vmalert_alerting_rules_last_evaluation_samples
The gauge type is used to remain consistent with Prometheus metric
`prometheus_rule_group_last_evaluation_samples` which is on the group level.
However, the counter type was considered as well.
Two metrics instead of one are used to make it easier to separate recording and
alerting rules. It is likely, number of samples produced by recording rules is
more important so people will refer to it more frequently.
The expected usage of the new metric is the following:
```
- alert: RecordingRuleReturnsEmptyResults
expr: sum(vmalert_recording_rules_last_evaluation_samples) by(recording) < 1
annotations:
summary: Recording rule {{$labels.recording}} returns empty results.
Please verify expression correctness.
```
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1494
* vmalert: rename `vmalert_alerts_error` to `vmalert_alerting_rules_error` to remain consistent with recording rules metrics
* vmalert: fix mistake with object reuse while parsing response
During the refactoring, the wrong optimisations was applied in
parse function which caused metric fields reset. The change removes
optimisation.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1369
* vmalert: add test to cover multiple metrics in one response
* vmalert: support rules backfilling (aka `replay`)
vmalert can `replay` configured rules in the past
and backfill results via remote write protocol.
It supports MetricsQL/PromQL storage as data source,
and can backfill data to remote write compatible
storage.
Supports recording and alerting rules `replay`. See more
details in README.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/836
* vmalert: review fixes
* vmalert: readme fixes
New flag `-rule.configCheckInterval` defines how often `vmalert` will re-read
config file. If it detects any changes, the config will be reloaded.
This behaviour is turned off by default.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/512
The new setting `extra_filter_labels` may be assigned to group.
If it is, then all rules within a group will automatically filter
for configured labels. The feature is well-described here
https://docs.victoriametrics.com#prometheus-querying-api-enhancements
New setting is compatible only with VM datasource.
* changes vmalert query function
for prometheus rules compatibility its better to use labels as map.
it simplifies template evaluation and allow to ignore can't evaluate field error
because map will return default value.
fixes https://github.com/VictoriaMetrics/operator/issues/243
duplicates map helps to determine wheter extra labels has overriden
labels which make time series unique. It was using a sorted hashed
labels sequence as a key. But hashing algorithm could have collisions,
so it is more convenient to not use hashing at all.
Log message for recording rules duplicates was improved as well.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1293
Starting from v1.56.0 VM supports `round_digits` which allows to limit
the number of digits after the decimal point in response value. The feature
can be used to reduce entropy of produced by recording rules values
and significantly improve the compression. See more details in link below.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/525
Previously, `startGroup` could exit on restore errors despite the
`remoteRead.ignoreRestoreErrors` flag value. Now vmalert checks the
flag value before deciding whether to return error or just log it.
Alerting rules now can return specific error type ErrStateRestore to indicate
whether restore state procedure failed. Such errors were returned and logged
before as well. But now user can specify whether to just log these errors
(remoteRead.ignoreRestoreErrors=true) or to stop the process
(remoteRead.ignoreRestoreErrors=false). The latter is important when VM isn't
ready yet to serve queries from vmalert and it needs to wait.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1252
* Simplify arguments list for fn `queryDataSource` to improve readbility
* vmalert: adjust `time` param according to rule evaluation interval
With this change, vmalert will start to use rule's evaluation interval
for truncating the `time` param. This is mostly needed to produce consistent
time series with timestamps unaffected by vmalert start time. Now, timestamp
becomes predictable.
Additionally, adjustment is similar to what Grafana does for plotting range graphs.
Hence, recording rule series and recording rule expression plotted in grafana
suppose to become similar in most of cases.
* changes vmalert Querier with per rule querier
it allows to changes some parametrs based on rule setting
for instance - alert type, tenant for cluster version or event endpoint url.
Previously, vmalert used `lastExecTime` timestamp when writing recording rules
to the remote storage. This may be incorrect, if vmalert uses `datasource.lookback` flag,
which means rule's expression will be executed at some moment in the past.
To avoid such situations, vmalert now will use returned timestamp instead of `lastExecTime`.
The major change is adding `sort` directive to docs. For those docs which are copied
from internal packages `sort` is added via makefile command. For the rest it is added
manually since they're updated manually as well.
The rest of changes is connected with markdown formatting. For example, changing headers
in some files (`##` => `#`) makes navigation on .github.io to look better. This especially
useful for `changelog` docs.
Table of contents for `vmctl` is dropped, since we already have it autogenerated on .github.io.
No link changes expected. The corresponding PR to `cluster` branch will be made in follow-up PR.
3s evaluation interval is too small for practical setups. It can result in increased load on datasource.
So it is better to remove it from example config args, which are usually copy-pasted by novice users.
The archive contains the following executables for Windows:
* vmagent
* vmalert
* vmauth
* vmctl
Other components - vmbackup, vmrestore, victoria-metrics - aren't supported for Windows yet
