Aliaksandr Valialkin
d962568e93
all: use %w instead of %s for wrapping errors in fmt.Errorf
...
This will simplify examining the returned errors such as httpserver.ErrorWithStatusCode .
See https://blog.golang.org/go1.13-errors for details.
2020-06-30 23:33:46 +03:00
Aliaksandr Valialkin
a586b8b6d4
app/vminsert/netstorage: do not re-route every time series to more than two vmstorage nodes when certain vmstorage nodes are temporarily slower than the rest of them
...
Previously vminsert may spread data for a single time series across all the available vmstorage nodes
when vmstorage nodes couldn't handle the given ingestion rate. This could lead to increased usage
of CPU and memory on every vmstorage node, since every vmstorage node had to register all the time
series seen in the cluster. Now a time series may spread to maximum two vmstorage nodes under heavy load.
Every time series is routed to a single vmstorage node under normal load.
2020-06-25 16:42:37 +03:00
Aliaksandr Valialkin
2fc2679a3f
app/vminsert/netstorage: remove possible race condition when broken connection may be recovered before acquiring storageNode.bcLock
2020-06-20 16:38:08 +03:00
Aliaksandr Valialkin
4400700832
app/vminsert: properly replicate data for the last RF-1
storage nodes for -replicationFactor=RF
...
Previously the data for the last `RF-1` storage noes has been incorrectly replicated to the first storage node.
2020-06-19 12:40:22 +03:00
Aliaksandr Valialkin
85c1ccb8b8
app/vminsert/netstorage: add missing return
in storageNode.checkHealth on connection failure
2020-06-18 20:51:51 +03:00
Aliaksandr Valialkin
464682f380
app/vminsert/netstorage: periodically check for each -storageNode
health, so it could be marked as healthy when it is ready to accept data
...
This fixes uneven data routing in cluster version when `-replicationFactor` is set to 1 (default value),
i.e. when the replication is disabled.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/546
2020-06-18 20:42:43 +03:00
Aliaksandr Valialkin
43b14b9569
app/vminsert/netstorage: free up unused memory in buffer after memory usage spikes
2020-06-01 14:33:35 +03:00
Aliaksandr Valialkin
f41a01332a
app/vminsert/netstorage: evenly distribute rerouted rows among all the availalbe storage nodes
...
Previously such rows were distributed to the original storage node or to the next storage node.
This may result to uneven load among the remaining storage nodes.
2020-05-30 13:51:09 +03:00
Aliaksandr Valialkin
02b2064d8e
app/vminsert/netstorage: do not increment vm_rpc_rows_lost_total when all the vmstorage nodes are unavailable, since vminsert retries sending the data instead of dropping it
2020-05-28 22:36:56 +03:00
Aliaksandr Valialkin
7a61357b5d
app/vminsert/netstorage: make sure that the the data is always replicated among -replicationFactor vmstorage nodes
...
Previously vminsert could write multiple copies of the data to a single vmstorage node when the ingestion rate
exceeds the maximum throughput for connections to vmstorage nodes.
2020-05-28 19:59:07 +03:00
Aliaksandr Valialkin
77e5165e7b
app/vminsert: add -replicationFactor
command-line flag for enabling data replication among available -storageNode instances
2020-05-27 17:29:44 +03:00
Aliaksandr Valialkin
b4e3bffe4b
app/vminsert/netstorage: emit warnings instead of errors when re-routing data to healthy storage nodes
2020-05-27 16:31:41 +03:00
Aliaksandr Valialkin
75f2f3b09d
app/vminsert/netstorage: improve ingestion performance when a single vmstorage node is slower than other vmstorage nodes
...
Previously the ingestion performance has been limited by the slowest vmstorage node.
Now vminsert should re-route data from the slowest vmstorage node to the remaining nodes.
2020-05-27 15:08:22 +03:00
Aliaksandr Valialkin
9844845d79
app/vminsert: tune the maximum summary buffer size for pending data to 1/4 of available RAM, since 1/2 of RAM is too big considering GOGC overhead
2020-05-25 02:00:37 +03:00
Aliaksandr Valialkin
4a82631e44
app/vminsert: limit the summary buffer sizes for all the storage nodes to a half of the allowed memory
2020-05-25 01:39:33 +03:00
Aliaksandr Valialkin
4bd3d4b148
app/vminsert/netstorage: do not return error from storageNode.flushBufLocked when the buffer has been successfully re-routed to healthy nodes
...
This should reduce the number of false errors in the log and the number of falsely lost rows
2020-05-22 18:29:43 +03:00
Aliaksandr Valialkin
6edc33d9bb
app/vminsert/netstorage: capture the first error instead of the last error when sending data to vmstorage
...
The first error has more chances to point to the real root cause of the issue.
2020-05-22 17:49:33 +03:00
Aliaksandr Valialkin
716bbe79d4
app/vminsert/netstorage: increase timeout for waiting for ack
message after sending big data block to vmstorage
2020-04-28 11:19:46 +03:00
Aliaksandr Valialkin
989d84cf3f
app/{vminsert,vmstorage}: wait for ack
from vmstorage
after each packet sent to it from vminsert
...
This should protect from possible data loss when `vmstorage` is stopped while the packet is sent from `vminsert`.
This commit switches to new protocol between vminsert and vmstorage, which is incompatible
with the previous protocol. So it is required that both vminsert and vmstorage nodes are updated.
2020-04-27 09:53:26 +03:00
Aliaksandr Valialkin
7ee7614e90
app/vmagent: initial implementation for vmagent
2020-02-23 17:31:54 +02:00
Aliaksandr Valialkin
347aaba79d
lib/{storage,mergeset}: use time.Ticker instead of time.Timer where appropriate
...
It has been appeared that time.Timer was used in places where time.Ticker must be used instead.
This could result in blocked goroutines as in the https://github.com/VictoriaMetrics/VictoriaMetrics/issues/316 .
2020-02-13 13:21:48 +02:00
Aliaksandr Valialkin
4d70a81e18
app/vminsert: do not drop pending rows if all the vmstorage backends are unavailable
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/294
2020-01-24 22:10:10 +02:00
Aliaksandr Valialkin
ecddba30fe
app/vminsert/netstorage: increase timeout for pushing data from vminsert to vmstorage by 3x
...
Our clients report that the previous timeout could lead to frequent errors when
vmstorage starts background merge for big parts on slow HDD.
2020-01-21 18:21:49 +02:00
Aliaksandr Valialkin
c81a89a8ed
app/vminsert: add /api/v1/import
handler
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6
2019-12-09 22:37:49 +02:00
Aliaksandr Valialkin
8d398af92f
app/vminsert/netstorage: mention the data size that cannot be sent to vmstorage
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/175
2019-09-25 12:53:41 +03:00
Aliaksandr Valialkin
73ac7b8dd6
app/vminsert/netstorage: make sure the conn exists before closing it in storageNode.closeBrokenConn
...
The conn can be missing or already closed during the call to storageNode.closeBrokenConn.
Prevent `nil pointer dereference` panic by verifying whether the conn is already closed.
Thanks to @CH-anhngo for reporting the issue.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/189
2019-09-25 10:36:50 +03:00
Aliaksandr Valialkin
550a12415a
app/vminsert/netstorage: log network errors when sending data to vmstorage nodes
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/175
2019-09-13 22:26:24 +03:00
Aliaksandr Valialkin
ed50b8792b
app/vminsert/netstorage: reduce the maximum buffer size for rerouted rows, so it occupies less RAM
2019-09-11 14:50:30 +03:00
Aliaksandr Valialkin
2f4c950fe9
app/vminsert/netstorage: send per-storageNode bufs to vmstorage nodes in parallel
...
This should improve the maximum ingestion throughput.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/175
2019-09-11 14:50:19 +03:00
Aliaksandr Valialkin
694cc59ed1
app/vminsert/netstorage: dynamically adjust timeouts for sending packets from vminsert to vmstorage depending on packet size
...
Bigger packets will have more chances to be sent to vmstorage.
2019-09-11 14:50:14 +03:00
Aliaksandr Valialkin
697de90893
app/vminsert: do not drop data in reroutedBuf if all the storage nodes are unhealthy
2019-08-23 10:38:19 +03:00
Aliaksandr Valialkin
a5dc54efc3
app/vminsert: properly limit the size of reroutedBuf
2019-08-23 10:29:51 +03:00
Aliaksandr Valialkin
c197641978
all: return 503 http error if service is temporarily unavailable
...
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/156
2019-08-23 09:49:50 +03:00
Aliaksandr Valialkin
5fcdb4a59a
app/vminsert: improve handling of unhealthy vmstorage nodes
...
* Spread load evenly among remaining healthy nodes instead of hammering
the next node after the unhealthy node.
* Make sure that the packet is flushed to storage node before returning success.
Previously packets could stay in local buffers and thus lost on connection errors.
* Keep rows in the limited memory when all the storage nodes are unhealthy.
2019-06-09 00:42:36 +03:00
Aliaksandr Valialkin
f37903adb3
app/vminsert: add -rpc.disableCompression
command-line flag for reducing CPU usage at the cost of higher network bandwidth usage
2019-05-24 12:51:07 +03:00
Aliaksandr Valialkin
24578b4bb1
all: open-sourcing cluster version
2019-05-23 00:25:38 +03:00