github-mirrors/VictoriaMetrics
1
0
Fork 0
mirror of https://github.com/VictoriaMetrics/VictoriaMetrics.git synced 2024-11-21 14:44:00 +00:00
Code Issues Projects Releases Packages Wiki Activity
VictoriaMetrics/docs/VictoriaLogs/LogsQL.md

78 KiB
Raw Blame History

sort weight title menu aliases
5 5 LogsQL
docs
parent weight
victorialogs 5
/VictoriaLogs/LogsQL.html

LogsQL

LogsQL is a simple yet powerful query language for VictoriaLogs. It provides the following features:

LogsQL tutorial

If you aren't familiar with VictoriaLogs, then start with key concepts docs.

Then follow these docs:

The simplest LogsQL query is just a word, which must be found in the log message. For example, the following query finds all the logs with error word:

error

If the queried word clashes with LogsQL keywords, then just wrap it into quotes. For example, the following query finds all the log messages with and word:

"and"

It is OK to wrap any word into quotes. For example:

"error"

Moreover, it is possible to wrap phrases containing multiple words in quotes. For example, the following query finds log messages with the error: cannot find file phrase:

"error: cannot find file"

Queries above match logs with any timestamp, e.g. they may return logs from the previous year alongside recently ingested logs.

Usually logs from the previous year aren't so interesting comparing to the recently ingested logs. So it is recommended adding time filter to the query. For example, the following query returns logs with the error word, which were ingested into VictoriaLogs during the last 5 minutes:

error AND _time:5m

This query consists of two filters joined with AND operator:

The AND operator means that the log entry must match both filters in order to be selected.

Typical LogsQL query constists of multiple filters joined with AND operator. It may be tiresome typing and then reading all these AND words. So LogsQL allows omitting AND words. For example, the following query is equivalent to the query above:

error _time:5m

The query returns all the log fields by default. See how to query specific fields.

Suppose the query above selects too many rows because some buggy app pushes invalid error logs to VictoriaLogs. Suppose the app adds buggy_app word to every log line. Then the following query removes all the logs from the buggy app, allowing us paying attention to the real errors:

_time:5m error NOT buggy_app

This query uses NOT operator for removing log lines from the buggy app. The NOT operator is used frequently, so it can be substituted with ! char. So the following query is equivalent to the previous one:

_time:5m error !buggy_app

Suppose another buggy app starts pushing invalid error logs to VictoriaLogs - it adds foobar word to every emitted log line. No problems - just add !foobar to the query in order to remove these buggy logs:

_time:5m error !buggy_app !foobar

This query can be rewritten to more clear query with the OR operator inside parentheses:

_time:5m error !(buggy_app OR foobar)

Note that the parentheses are required here, since otherwise the query won't return the expected results. The query error !buggy_app OR foobar is interpreted as (error AND NOT buggy_app) OR foobar. This query may return error logs from the buggy app if they contain foobar word. This query also continues returning all the error logs from the second buggy app. This is because of different priorities for NOT, AND and OR operators. Read these docs for more details. There is no need in remembering all these priority rules - just wrap the needed query parts into explicit parentheses if you aren't sure in priority rules. As an additional bonus, explicit parentheses make queries easier to read and maintain.

Queries above assume that the error word is stored in the log message. This word can be stored in other field such as log.level. How to select error logs in this case? Just add the log.level: prefix in front of the error word:

_time:5m log.level:error !(buggy_app OR foobar)

The field name can be wrapped into quotes if it contains special chars or keywords, which may clash with LogsQL syntax. Any word also can be wrapped into quotes. So the following query is equivalent to the previous one:

"_time":"5m" "log.level":"error" !("buggy_app" OR "foobar")

What if the application identifier - such as buggy_app and foobar - is stored in the app field? Correct - just add app: prefix in front of buggy_app and foobar:

_time:5m log.level:error !(app:buggy_app OR app:foobar)

The query can be simplified by moving the app: prefix outside the parentheses:

_time:5m log.level:error !app:(buggy_app OR foobar)

The app field uniquely identifies the application instance if a single instance runs per each unique app. In this case it is recommended associating the app field with log stream fields during data ingestion. This usually improves both compression rate and query performance when querying the needed streams via _stream filter. If the app field is associated with the log stream, then the query above can be rewritten to more performant one:

_time:5m log.level:error _stream:{app!~"buggy_app|foobar"}

This query completely skips scanning for logs from buggy_app and foobar apps, thus significantly reducing disk read IO and CPU time needed for performing the query.

Finally, it is recommended reading performance tips.

Now you are familiar with LogsQL basics. Read query syntax if you want to continue learning LogsQL.

Key concepts

Word

LogsQL splits all the log fields into words delimited by non-word chars such as whitespace, parens, punctuation chars, etc. For example, the foo: (bar,"тест")! string is split into foo, bar and тест words. Words can contain arbitrary utf-8 chars. These words are taken into account by full-text search filters such as word filter, phrase filter and prefix filter.

Query syntax

LogsQL query must contain filters for selecting the matching logs. At least a single filter is required. For example, the following query selects all the logs for the last 5 minutes by using _time filter:

_time:5m

Additionally to filters, LogQL query may contain arbitrary mix of optional actions for processing the selected logs. These actions are delimited by | and are known as pipes. For example, the following query uses stats pipe for returning the number of log messages with the error word for the last 5 minutes:

_time:5m error | stats count() errors

See the list of supported pipes in LogsQL.

Filters

LogsQL supports various filters for searching for log messages (see below). They can be combined into arbitrary complex queries via logical filters.

Filters are applied to _msg field by default. If the filter must be applied to other log field, then its' name followed by the colon must be put in front of the filter. For example, if error word filter must be applied to the log.level field, then use log.level:error query.

Field names and filter args can be put into quotes if they contain special chars, which may clash with LogsQL syntax. LogsQL supports quoting via double quotes ", single quotes ' and backticks:

"some 'field':123":i('some("value")') AND `other"value'`

If doubt, it is recommended quoting field names and filter args.

The list of LogsQL filters:

Time filter

VictoriaLogs scans all the logs per each query if it doesn't contain the filter on _time field. It uses various optimizations in order to accelerate full scan queries without the _time filter, but such queries can be slow if the storage contains large number of logs over long time range. The easiest way to optimize queries is to narrow down the search with the filter on _time field.

For example, the following query returns log messages ingested into VictoriaLogs during the last hour, which contain the error word:

_time:1h AND error

The following formats are supported for _time filter:

  • _time:duration matches logs with timestamps on the time range (now-duration, now]. Examples:
    • _time:5m - returns logs for the last 5 minutes
    • _time:2.5d15m42.345s - returns logs for the last 2.5 days, 15 minutes and 42.345 seconds
    • _time:1y - returns logs for the last year
  • _time:YYYY-MM-DD - matches all the logs for the particular day by UTC. For example, _time:2023-04-25 matches logs on April 25, 2023 by UTC.
  • _time:YYYY-MM - matches all the logs for the particular month by UTC. For example, _time:2023-02 matches logs on February, 2023 by UTC.
  • _time:YYYY - matches all the logs for the particular year by UTC. For example, _time:2023 matches logs on 2023 by UTC.
  • _time:YYYY-MM-DDTHH - matches all the logs for the particular hour by UTC. For example, _time:2023-04-25T22 matches logs on April 25, 2023 at 22 hour by UTC.
  • _time:YYYY-MM-DDTHH:MM - matches all the logs for the particular minute by UTC. For example, _time:2023-04-25T22:45 matches logs on April 25, 2023 at 22:45 by UTC.
  • _time:YYYY-MM-DDTHH:MM:SS - matches all the logs for the particular second by UTC. For example, _time:2023-04-25T22:45:59 matches logs on April 25, 2023 at 22:45:59 by UTC.
  • _time:[min_time, max_time] - matches logs on the time range [min_time, max_time], including both min_time and max_time. The min_time and max_time can contain any format specified here. For example, _time:[2023-04-01, 2023-04-30] matches logs for the whole April, 2023 by UTC, e.g. it is equivalent to _time:2023-04.
  • _time:[min_time, max_time) - matches logs on the time range [min_time, max_time), not including max_time. The min_time and max_time can contain any format specified here. For example, _time:[2023-02-01, 2023-03-01) matches logs for the whole February, 2023 by UTC, e.g. it is equivalent to _time:2023-02.

It is possible to specify time zone offset for all the absolute time formats by appending +hh:mm or -hh:mm suffix. For example, _time:2023-04-25+05:30 matches all the logs on April 25, 2023 by India time zone, while _time:2023-02-07:00 matches all the logs on February, 2023 by California time zone.

It is possible to specify generic offset for the selected time range by appending offset after the _time filter. Examples:

  • _time:5m offset 1h matches logs on the time range (now-1h5m, now-1h].
  • _time:2023-07 offset 5h30m matches logs on July, 2023 by UTC with offset 5h30m.
  • _time:[2023-02-01, 2023-03-01) offset 1w matches logs the week before the time range [2023-02-01, 2023-03-01) by UTC.

Performance tips:

  • It is recommended specifying the smallest possible time range during the search, since it reduces the amounts of log entries, which need to be scanned during the query. For example, _time:1h is usually faster than _time:5h.

  • While LogsQL supports arbitrary number of _time:... filters at any level of logical filters, it is recommended specifying a single _time filter at the top level of the query.

  • See other performance tips.

See also:

Stream filter

VictoriaLogs provides an optimized way to select log entries, which belong to particular log streams. This can be done via _stream:{...} filter. The {...} may contain arbitrary Prometheus-compatible label selector over fields associated with log streams. For example, the following query selects log entries with app field equal to nginx:

_stream:{app="nginx"}

This query is equivalent to the following exact() query, but the upper query usually works much faster:

app:exact("nginx")

Performance tips:

  • It is recommended using the most specific _stream:{...} filter matching the smallest number of log streams, which needs to be scanned by the rest of filters in the query.

  • While LogsQL supports arbitrary number of _stream:{...} filters at any level of logical filters, it is recommended specifying a single _stream:... filter at the top level of the query.

  • See other performance tips.

See also:

Word filter

The simplest LogsQL query consists of a single word to search in log messages. For example, the following query matches log messages with error word inside them:

error

This query matches the following log messages:

  • error
  • an error happened
  • error: cannot open file

This query doesn't match the following log messages:

  • ERROR, since the filter is case-sensitive by default. Use i(error) for this case. See these docs for details.
  • multiple errors occurred, since the errors word doesn't match error word. Use error* for this case. See these docs for details.

By default the given word is searched in the _msg field. Specify the field name in front of the word and put a colon after it if it must be searched in the given field. For example, the following query returns log entries containing the error word in the log.level field:

log.level:error

Both the field name and the word in the query can contain arbitrary utf-8-encoded chars. For example:

поле:значение

Both the field name and the word in the query can be put inside quotes if they contain special chars, which may clash with the query syntax. For example, the following query searches for the ip 1.2.3.45 in the field ip:remote:

"ip:remote":"1.2.3.45"

See also:

Phrase filter

Is you need to search for log messages with the specific phrase inside them, then just wrap the phrase in quotes. The phrase can contain any chars, including whitespace, punctuation, parens, etc. They are taken into account during the search. For example, the following query matches log messages with ssh: login fail phrase inside them:

"ssh: login fail"

This query matches the following log messages:

  • ERROR: ssh: login fail for user "foobar"
  • ssh: login fail!

This query doesn't match the following log messages:

  • ssh login fail, since the message misses : char just after the ssh. Use seq("ssh", "login", "fail") query if log messages with the sequence of these words must be found. See these docs for details.
  • login fail: ssh error, since the message doesn't contain the full phrase requested in the query. If you need matching a message with all the words listed in the query, then use ssh AND login AND fail query. See these docs for details.
  • ssh: login failed, since the message ends with failed word instead of fail word. Use "ssh: login fail"* query for this case. See these docs for details.
  • SSH: login fail, since the SSH word is in capital letters. Use i("ssh: login fail") for case-insensitive search. See these docs for details.

By default the given phrase is searched in the _msg field. Specify the field name in front of the phrase and put a colon after it if it must be searched in the given field. For example, the following query returns log entries containing the cannot open file phrase in the event.original field:

event.original:"cannot open file"

Both the field name and the phrase can contain arbitrary utf-8-encoded chars. For example:

сообщение:"невозможно открыть файл"

The field name can be put inside quotes if it contains special chars, which may clash with the query syntax. For example, the following query searches for the cannot open file phrase in the field some:message:

"some:message":"cannot open file"

See also:

Prefix filter

If you need to search for log messages with words / phrases containing some prefix, then just add * char to the end of the word / phrase in the query. For example, the following query returns log messages, which contain words with err prefix:

err*

This query matches the following log messages:

  • err: foobar
  • cannot open file: error occurred

This query doesn't match the following log messages:

  • Error: foobar, since the Error word starts with capital letter. Use i(err*) for this case. See these docs for details.
  • fooerror, since the fooerror word doesn't start with err. Use re("err") for this case. See these docs for details.

Prefix filter can be applied to phrases. For example, the following query matches log messages containing phrases with unexpected fail prefix:

"unexpected fail"*

This query matches the following log messages:

  • unexpected fail: IO error
  • error:unexpected failure

This query doesn't match the following log messages:

  • unexpectedly failed, since the unexpectedly doesn't match unexpected word. Use unexpected* AND fail* for this case. See these docs for details.
  • failed to open file: unexpected EOF, since failed word occurs before the unexpected word. Use unexpected AND fail* for this case. See these docs for details.

By default the prefix filter is applied to the _msg field. Specify the needed field name in front of the prefix filter in order to apply it to the given field. For example, the following query matches log.level field containing any word with the err prefix:

log.level:err*

If the field name contains special chars, which may clash with the query syntax, then it may be put into quotes in the query. For example, the following query matches log:level field containing any word with the err prefix.

"log:level":err*

Performance tips:

See also:

Empty value filter

Sometimes it is needed to find log entries without the given log field. This can be performed with log_field:"" syntax. For example, the following query matches log entries without host.hostname field:

host.hostname:""

See also:

Any value filter

Sometimes it is needed to find log entries containing any non-empty value for the given log field. This can be performed with log_field:* syntax. For example, the following query matches log entries with non-empty host.hostname field:

host.hostname:*

See also:

Exact filter

The word filter and phrase filter return log messages, which contain the given word or phrase inside them. The message may contain additional text other than the requested word or phrase. If you need searching for log messages or log fields with the exact value, then use the exact(...) filter. For example, the following query returns log messages wih the exact value fatal error: cannot find /foo/bar:

exact("fatal error: cannot find /foo/bar")

The query doesn't match the following log messages:

  • fatal error: cannot find /foo/bar/baz or some-text fatal error: cannot find /foo/bar, since they contain an additional text other than the specified in the exact() filter. Use "fatal error: cannot find /foo/bar" query in this case. See these docs for details.

  • FATAL ERROR: cannot find /foo/bar, since the exact() filter is case-sensitive. Use i("fatal error: cannot find /foo/bar") in this case. See these docs for details.

By default the exact() filter is applied to the _msg field. Specify the field name in front of the exact() filter and put a colon after it if it must be searched in the given field. For example, the following query returns log entries with the exact error value at log.level field:

log.level:exact("error")

Both the field name and the phrase can contain arbitrary utf-8-encoded chars. For example:

log.уровень:exact("ошибка")

The field name can be put inside quotes if it contains special chars, which may clash with the query syntax. For example, the following query matches the error value in the field log:level:

"log:level":exact("error")

See also:

Exact prefix filter

Sometimes it is needed to find log messages starting with some prefix. This can be done with the exact("prefix"*) filter. For example, the following query matches log messages, which start from Processing request prefix:

exact("Processing request"*)

This filter matches the following log messages:

  • Processing request foobar
  • Processing requests from ...

It doesn't match the following log messages:

  • processing request foobar, since the log message starts with lowercase p. Use exact("processing request"*) OR exact("Processing request"*) query in this case. See these docs for details.
  • start: Processing request, since the log message doesn't start with Processing request. Use "Processing request" query in this case. See these docs for details.

By default the exact() filter is applied to the _msg field. Specify the field name in front of the exact() filter and put a colon after it if it must be searched in the given field. For example, the following query returns log entries with log.level field, which starts with err prefix:

log.level:exact("err"*)

Both the field name and the phrase can contain arbitrary utf-8-encoded chars. For example:

log.уровень:exact("ошиб"*)

The field name can be put inside quotes if it contains special chars, which may clash with the query syntax. For example, the following query matches log:level values starting with err prefix:

"log:level":exact("err"*)

See also:

Multi-exact filter

Sometimes it is needed to locate log messages with a field containing one of the given values. This can be done with multiple exact filters combined into a single logical filter. For example, the following query matches log messages with log.level field containing either error or fatal exact values:

log.level:(exact("error") OR exact("fatal"))

While this solution works OK, LogsQL provides simpler and faster solution for this case - the in() filter.

log.level:in("error", "fatal")

It works very fast for long lists passed to in().

The future VictoriaLogs versions will allow passing arbitrary queries into in() filter. For example, the following query selects all the logs for the last hour for users, who visited pages with admin word in the path during the last day:

_time:1h AND user_id:in(_time:1d AND path:admin | fields user_id)

See the Roadmap for details.

See also:

Case-insensitive filter

Case-insensitive filter can be applied to any word, phrase or prefix by wrapping the corresponding word filter, phrase filter or prefix filter into i(). For example, the following query returns log messages with error word in any case:

i(error)

The query matches the following log messages:

  • unknown error happened
  • ERROR: cannot read file
  • Error: unknown arg
  • An ErRoR occured

The query doesn't match the following log messages:

  • FooError, since the FooError word has superflouos prefix Foo. Use re("(?i)error") for this case. See these docs for details.
  • too many Errors, since the Errors word has superflouos suffix s. Use i(error*) for this case.

By default the i() filter is applied to the _msg field. Specify the needed field name in front of the filter in order to apply it to the given field. For example, the following query matches log.level field containing error word in any case:

log.level:i(error)

If the field name contains special chars, which may clash with the query syntax, then it may be put into quotes in the query. For example, the following query matches log:level field containing error word in any case.

"log:level":i("error")

Performance tips:

See also:

Sequence filter

Sometimes it is needed to find log messages with words or phrases in a particular order. For example, if log messages with error word followed by open file phrase must be found, then the following LogsQL query can be used:

seq("error", "open file")

This query matches some error: cannot open file /foo/bar message, since the open file phrase goes after the error word. The query doesn't match the cannot open file: error message, since the open file phrase is located in front of the error word. If you need matching log messages with both error word and open file phrase, then use error AND "open file" query. See these docs for details.

By default the seq() filter is applied to the _msg field. Specify the needed field name in front of the filter in order to apply it to the given field. For example, the following query matches event.original field containing (error, "open file") sequence:

event.original:seq(error, "open file")

If the field name contains special chars, which may clash with the query syntax, then it may be put into quotes in the query. For example, the following query matches event:original field containing (error, "open file") sequence:

"event:original":seq(error, "open file")

See also:

Regexp filter

LogsQL supports regular expression filter with re2 syntax via re(...) expression. For example, the following query returns all the log messages containing err or warn susbstrings:

re("err|warn")

The query matches the following log messages, which contain either err or warn substrings:

  • error: cannot read data
  • 2 warnings have been raised
  • data trasferring finished

The query doesn't match the following log messages:

  • ERROR: cannot open file, since the ERROR word is in uppercase letters. Use re("(?i)(err|warn)") query for case-insensitive regexp search. See these docs for details. See also case-insenstive filter docs.
  • it is warmer than usual, since it doesn't contain neither err nor warn substrings.

By default the re() filter is applied to the _msg field. Specify the needed field name in front of the filter in order to apply it to the given field. For example, the following query matches event.original field containing either err or warn substrings:

event.original:re("err|warn")

If the field name contains special chars, which may clash with the query syntax, then it may be put into quotes in the query. For example, the following query matches event:original field containing either err or warn substrings:

"event:original":re("err|warn")

Performance tips:

  • Prefer combining simple word filter with logical filter instead of using regexp filter. For example, the re("error|warning") query can be substituted with error OR warning query, which usually works much faster. Note that the re("error|warning") matches errors as well as warnings words, while error OR warning matches only the specified words. See also multi-exact filter.
  • Prefer moving the regexp filter to the end of the logical filter, so lightweighter filters are executed first.
  • Prefer using exact("some prefix"*) instead of re("^some prefix"), since the exact() works much faster than the re() filter.
  • See other performance tips.

See also:

Range filter

If you need to filter log message by some field containing only numeric values, then the range() filter can be used. For example, if the request.duration field contains the request duration in seconds, then the following LogsQL query can be used for searching for log entries with request durations exceeding 4.2 seconds:

request.duration:range(4.2, Inf)

The lower and the upper bounds of the range are excluded by default. If they must be included, then substitute the corresponding parentheses with square brackets. For example:

  • range[1, 10) includes 1 in the matching range
  • range(1, 10] includes 10 in the matching range
  • range[1, 10] includes 1 and 10 in the matching range

The range boundaries can be expressed in the following forms:

  • Hexadecimal form. For example, range(0xff, 0xABCD).
  • Binary form. Form example, range(0b100110, 0b11111101)
  • Integer form with _ delimiters for better readability. For example, range(1_000, 2_345_678).

Note that the range() filter doesn't match log fields with non-numeric values alongside numeric values. For example, range(1, 10) doesn't match the request took 4.2 seconds log message, since the 4.2 number is surrounded by other text. Extract the numeric value from the message with parse(_msg, "the request took <request_duration> seconds") transformation and then apply the range() post-filter to the extracted request_duration field.

Performance tips:

See also:

IPv4 range filter

If you need to filter log message by some field containing only IPv4 addresses such as 1.2.3.4, then the ipv4_range() filter can be used. For example, the following query matches log entries with user.ip address in the range [127.0.0.0 - 127.255.255.255]:

user.ip:ipv4_range(127.0.0.0, 127.255.255.255)

The ipv4_range() accepts also IPv4 subnetworks in CIDR notation. For example, the following query is equivalent to the query above:

user.ip:ipv4_range("127.0.0.0/8")

If you need matching a single IPv4 address, then just put it inside ipv4_range(). For example, the following query matches 1.2.3.4 IP at user.ip field:

user.ip:ipv4_range("1.2.3.4")

Note that the ipv4_range() doesn't match a string with IPv4 address if this string contains other text. For example, ipv4_range("127.0.0.0/24") doesn't match request from 127.0.0.1: done log message, since the 127.0.0.1 ip is surrounded by other text. Extract the IP from the message with parse(_msg, "request from <ip>: done") transformation and then apply the ipv4_range() post-filter to the extracted ip field.

Hints:

  • If you need searching for log messages containing the given X.Y.Z.Q IPv4 address, then "X.Y.Z.Q" query can be used. See these docs for details.
  • If you need searching for log messages containing at least a single IPv4 address out of the given list, then "ip1" OR "ip2" ... OR "ipN" query can be used. See these docs for details.
  • If you need finding log entries with ip field in multiple ranges, then use ip:(ipv4_range(range1) OR ipv4_range(range2) ... OR ipv4_range(rangeN)) query. See these docs for details.

Performance tips:

See also:

String range filter

If you need to filter log message by some field with string values in some range, then string_range() filter can be used. For example, the following LogsQL query matches log entries with user.name field starting from A and B chars:

user.name:string_range(A, C)

The string_range() includes the lower bound, while excluding the upper bound. This simplifies querying distinct sets of logs. For example, the user.name:string_range(C, E) would match user.name fields, which start from C and D chars.

See also:

Length range filter

If you need to filter log message by its length, then len_range() filter can be used. For example, the following LogsQL query matches log messages with lengths in the range [5, 10] chars:

len_range(5, 10)

This query matches the following log messages, since their length is in the requested range:

  • foobar
  • foo bar

This query doesn't match the following log messages:

  • foo, since it is too short
  • foo bar baz abc, sinc it is too long

It is possible to use inf as the upper bound. For example, the following query matches log messages with the length bigger or equal to 5 chars:

len_range(5, inf)

The range boundaries can be expressed in the following forms:

  • Hexadecimal form. For example, len_range(0xff, 0xABCD).
  • Binary form. Form example, len_range(0b100110, 0b11111101)
  • Integer form with _ delimiters for better readability. For example, len_range(1_000, 2_345_678).

By default the len_range() is applied to the _msg field. Put the field name in front of the len_range() in order to apply the filter to the needed field. For example, the following query matches log entries with the foo field length in the range [10, 20] chars:

foo:len_range(10, 20)

See also:

Logical filter

Simpler LogsQL filters can be combined into more complex filters with the following logical operations:

  • q1 AND q2 - matches common log entries returned by both q1 and q2. Arbitrary number of filters can be combined with AND operation. For example, error AND file AND app matches log messages, which simultaneously contain error, file and app words. The AND operation is frequently used in LogsQL queries, so it is allowed to skip the AND word. For example, error file app is equivalent to error AND file AND app.

  • q1 OR q2 - merges log entries returned by both q1 and q2. Aribtrary number of filters can be combined with OR operation. For example, error OR warning OR info matches log messages, which contain at least one of error, warning or info words.

  • NOT q - returns all the log entries except of those which match q. For example, NOT info returns all the log messages, which do not contain info word. The NOT operation is frequently used in LogsQL queries, so it is allowed substituting NOT with ! in queries. For example, !info is equivalent to NOT info.

The NOT operation has the highest priority, AND has the middle priority and OR has the lowest priority. The priority order can be changed with parentheses. For example, NOT info OR debug is interpreted as (NOT info) OR debug, so it matches log messages, which do not contain info word, while it also matches messages with debug word (which may contain the info word). This is not what most users expect. In this case the query can be rewritten to NOT (info OR debug), which correctly returns log messages without info and debug words.

LogsQL supports arbitrary complex logical queries with arbitrary mix of AND, OR and NOT operations and parentheses.

By default logical filters apply to the _msg field unless the inner filters explicitly specify the needed log field via field_name:filter syntax. For example, (error OR warn) AND host.hostname:host123 is interpreted as (_msg:error OR _msg:warn) AND host.hostname:host123.

It is possible to specify a single log field for multiple filters with the following syntax:

field_name:(q1 OR q2 OR ... qN)

For example, log.level:error OR log.level:warning OR log.level:info can be substituted with the shorter query: log.level:(error OR warning OR info).

Performance tips:

  • VictoriaLogs executes logical operations from the left to the right, so it is recommended moving the most specific and the fastest filters (such as word filter and phrase filter) to the left, while moving less specific and the slowest filters (such as regexp filter and case-insensitive filter) to the right. For example, if you need to find log messages with the error word, which match some /foo/(bar|baz) regexp, it is better from performance PoV to use the query error re("/foo/(bar|baz)") instead of re("/foo/(bar|baz)") error.

    The most specific filter means that it matches the lowest number of log entries comparing to other filters.

  • See other performance tips.

Pipes

Additionally to filters, LogsQL query may contain arbitrary mix of '|'-delimited actions known as pipes. For example, the following query uses stats, sort and limit pipes for returning top 10 log streams with the biggest number of logs during the last 5 minutes:

_time:5m | stats by (_stream) count() per_stream_logs | sort by (per_stream_logs desc) | limit 10

LogsQL supports the following pipes:

copy pipe

If some log fields must be copied, then | copy src1 as dst1, ..., srcN as dstN pipe can be used. For example, the following query copies host field to server for logs over the last 5 minutes, so the output contains both host and server fields:

_time:5m | copy host as server

Multiple fields can be copied with a single | copy ... pipe. For example, the following query copies _time field to timestamp, while _msg field is copied to message:

_time:5m | copy _time as timestmap, _msg as message

The as keyword is optional.

cp keyword can be used instead of copy for convenience. For example, _time:5m | cp foo bar is equivalent to _time:5m | copy foo as bar.

See also:

delete pipe

If some log fields must be deleted, then | delete field1, ..., fieldN pipe can be used. For example, the following query deletes host and app fields from the logs over the last 5 minutes:

_time:5m | delete host, app

del and rm keywords can be used instead of delete for convenience. For example, _time:5m | del host is equivalent to _time:5m | rm host and _time:5m | delete host.

See also:

fields pipe

By default all the log fields are returned in the response. It is possible to select the given set of log fields with | fields field1, ..., fieldN pipe. For example, the following query selects only host and _msg fields from logs for the last 5 minutes:

_time:5m | fields host, _msg

See also:

limit pipe

If only a subset of selected logs must be processed, then | limit N pipe can be used, where N can contain any supported integer numeric value. For example, the following query returns up to 100 logs over the last 5 minutes:

_time:5m | limit 100

head keyword can be used instead of limit for convenience. For example, _time:5m | head 100 is equivalent to _time:5m | limit 100.

By default rows are selected in arbitrary order because of performance reasons, so the query above can return different sets of logs every time it is executed. sort pipe can be used for making sure the logs are in the same order before applying limit ... to them.

See also:

offset pipe

If some selected logs must be skipped after sort, then | offset N pipe can be used, where N can contain any supported integer numeric value. For example, the following query skips the first 100 logs over the last 5 minutes after soring them by _time:

_time:5m | sort by (_time) | offset 100

skip keyword can be used instead of offset keyword for convenience. For example, _time:5m | skip 10 is equivalent to _time:5m | offset 10.

Note that skipping rows without sorting has little sense, since they can be returned in arbitrary order because of performance reasons. Rows can be sorted with sort pipe.

See also:

rename pipe

If some log fields must be renamed, then | rename src1 as dst1, ..., srcN as dstN pipe can be used. For example, the following query renames host field to server for logs over the last 5 minutes, so the output contains server field instead of host field:

_time:5m | rename host as server

Multiple fields can be renamed with a single | rename ... pipe. For example, the following query renames host to instance and app to job:

_time:5m | rename host as instance, app as job

The as keyword is optional.

mv keyword can be used instead of rename keyword for convenience. For example, _time:5m | mv foo bar is equivalent to _time:5m | rename foo as bar.

See also:

sort pipe

By default logs are selected in arbitrary order because of performance reasons. If logs must be sorted, then | sort by (field1, ..., fieldN) pipe can be used. The returned logs are sorted by the given fields using natural sorting.

For example, the following query returns logs for the last 5 minutes sorted by _stream and then by _time:

_time:5m | sort by (_stream, _time)

Add desc after the given log field in order to sort in reverse order of this field. For example, the following query sorts log fields in reverse order of request_duration_seconds field:

_time:5m | sort by (request_duration_seconds desc)

The reverse order can be applied globally via desc keyword after by(...) clause:

_time:5m | sort by (foo, bar) desc

Note that sorting of big number of logs can be slow and can consume a lot of additional memory. It is recommended limiting the number of logs before sorting with the following approaches:

  • Reducing the selected time range with time filter.
  • Using more specific filters, so they select less logs.

See also:

uniq pipe

| uniq ... pipe allows returning only unique results over the selected logs. For example, the following LogsQL query returns unique values for ip log field over logs for the last 5 minutes:

_time:5m | uniq by (ip)

It is possible to specify multiple fields inside by(...) clause. In this case all the unique sets for the given fields are returned. For example, the following query returns all the unique (host, path) pairs for the logs over the last 5 minutes:

_time:5m | uniq by (host, path)

Unique entries are stored in memory during query execution. Big number of unique selected entries may require a lot of memory. Sometimes it is enough to return up to N unique entries. This can be done by adding limit N after by (...) clause. This allows limiting memory usage. For example, the following query returns up to 100 unique (host, path) pairs for the logs over the last 5 minutes:

_time:5m | uniq by (host, path) limit 100

See also:

stats pipe

| stats ... pipe allows calculating various stats over the selected logs. For example, the following LogsQL query uses count stats function for calculating the number of logs for the last 5 minutes:

_time:5m | stats count() logs_total

| stats ... pipe has the following basic format:

... | stats
  stats_func1(...) as result_name1,
  ...
  stats_funcN(...) as result_nameN

Where stats_func* is any of the supported stats function, while result_name* is the name of the log field to store the result of the corresponding stats function. The as keyword is optional.

For example, the following query calculates the following stats for logs over the last 5 minutes:

_time:5m | stats count() logs_total, count_uniq(_stream) streams_total

See also:

Stats by fields

The following LogsQL syntax can be used for calculating independent stats per group of log fields:

... | stats by (field1, ..., fieldM)
  stats_func1(...) as result_name1,
  ...
  stats_funcN(...) as result_nameN

This calculates stats_func* per each (field1, ..., fieldM) group of log fields.

For example, the following query calculates the number of logs and unique ip addresses over the last 5 minutes, grouped by (host, path) fields:

_time:5m | stats by (host, path) count() logs_total, count_uniq(ip) ips_total

Stats by time buckets

The following syntax can be used for calculating stats grouped by time buckets:

... | stats by (_time:step)
  stats_func1(...) as result_name1,
  ...
  stats_funcN(...) as result_nameN

This calculates stats_func* per each step of _time field. The step can have any duration value. For example, the following LogsQL query returns per-minute number of logs and unique ip addresses over the last 5 minutes:

_time:5m | stats by (_time:1m) count() logs_total, count_uniq(ip) ips_total

Additionally, the following step values are supported:

  • nanosecond - equals to 1ns duration.
  • microsecond - equals to 1µs duration.
  • millisecond - equals to 1ms duration.
  • second - equals to 1s duration.
  • minute - equals to 1m duration.
  • hour - equalst to 1h duration.
  • day - equals to 1d duration.
  • week - equals to 1w duration.
  • month - equals to one month. It properly takes into account the number of days per each month.
  • year - equals to one year. It properly takes into account the number of days per each year.

Stats by time buckets with timezone offset

VictoriaLogs stores _time values as Unix time in nanoseconds. This time corresponds to UTC time zone. Sometimes it is needed calculating stats grouped by days or weeks at non-UTC timezone. This is possible with the following syntax:

... | stats by (_time:step offset timezone_offset) ...

For example, the following query calculates per-day number of logs over the last week, in UTC+02:00 time zone:

_time:1w | stats by (_time:1d offset 2h) count() logs_total

Stats by field buckets

Every log field inside | stats by (...) can be bucketed in the same way at _time field in this example. Any numeric value can be used as step value for the bucket. For example, the following query calculates the number of requests for the last hour, bucketed by 10KB of request_size_bytes field:

_time:1h | stats by (request_size_bytes:10KB) count() requests

Stats by IPv4 buckets

Stats can be bucketed by log field containing IPv4 addresses via the ip_field_name:/network_mask syntax inside by(...) clause. For example, the following query returns the number of log entries per /24 subnetwork extracted from the ip log field during the last 5 minutes:

_time:5m | stats by (ip:/24) count() requests_per_subnet

stats pipe functions

LogsQL supports the following functions for stats pipe:

avg stats

avg(field1, ..., fieldN) stats pipe calculates the average value across all the mentioned log fields. Non-numeric values are ignored.

For example, the following query returns the average value for the duration field over logs for the last 5 minutes:

_time:5m | stats avg(duration) avg_duration

See also:

count stats

count() calculates the number of selected logs.

For example, the following query returns the number of logs over the last 5 minutes:

_time:5m | stats count() logs

It is possible calculating the number of logs with non-empty values for some log field with the count(fieldName) syntax. For example, the following query returns the number of logs with non-empty username field over the last 5 minutes:

_time:5m | stats count(username) logs_with_username

If multiple fields are enumerated inside count(), then it counts the number of logs with at least a single non-empty field mentioned inside count(). For example, the following query returns the number of logs with non-empty username or password fields over the last 5 minutes:

_time:5m | stats count(username, password) logs_with_username_or_password

See also:

count_empty stats

count_empty(field1, ..., fieldN) calculates the number of logs with empty (field1, ..., fieldN) tuples.

For example, the following query calculates the number of logs with empty username field during the last 5 minutes:

_time:5m | stats count_empty(username) logs_with_missing_username

See also:

count_uniq stats

count_uniq(field1, ..., fieldN) stats pipe calculates the number of unique non-empty (field1, ..., fieldN) tuples.

For example, the following query returns the number of unique non-empty values for ip field over the last 5 minutes:

_time:5m | stats count_uniq(ip) ips

The following query returns the number of unique (host, path) pairs for the corresponding fields over the last 5 minutes:

_time:5m | stats count_uniq(host, path) unique_host_path_pairs

Every unique value is stored in memory during query execution. Big number of unique values may require a lot of memory. Sometimes it is needed to know whether the number of unique values reaches some limit. In this case add limit N just after count_uniq(...) for limiting the number of counted unique values up to N, while limiting the maximum memory usage. For example, the following query counts up to 1_000_000 unique values for the ip field:

_time:5m | stats count_uniq(ip) limit 1_000_000 as ips_1_000_000

See also:

max stats

max(field1, ..., fieldN) stats pipe calculates the maximum value across all the mentioned log fields. Non-numeric values are ignored.

For example, the following query returns the maximum value for the duration field over logs for the last 5 minutes:

_time:5m | stats max(duration) max_duration

See also:

min stats

min(field1, ..., fieldN) stats pipe calculates the minimum value across all the mentioned log fields. Non-numeric values are ignored.

For example, the following query returns the minimum value for the duration field over logs for the last 5 minutes:

_time:5m | stats min(duration) min_duration

See also:

sum stats

sum(field1, ..., fieldN) stats pipe calculates the sum of numeric values across all the mentioned log fields.

For example, the following query returns the sum of numeric values for the duration field over logs for the last 5 minutes:

_time:5m | stats sum(duration) sum_duration

See also:

uniq_values stats

uniq_values(field1, ..., fieldN) stats pipe returns the unique non-empty values across the mentioned log fields. The returned values are encoded in JSON array. The order of the returned values is arbitrary.

For example, the following query returns unique non-empty values for the ip field over logs for the last 5 minutes:

_time:5m | stats uniq_values(ip) unique_ips

Every unique value is stored in memory during query execution. Big number of unique values may require a lot of memory. Sometimes it is enough to return only a subset of unique values. In this case add limit N after uniq_values(...) in order to limit the number of returned unique values to N, while limiting the maximum memory usage. For example, the following query returns up to 100 unique values for the ip field over the logs for the last 5 minutes. Note that arbitrary subset of unique ip values is returned every time:

_time:5m | stats uniq_values(ip) limit 100 as unique_ips_100

See also:

values stats

values(field1, ..., fieldN) stats pipe returns all the values (including empty values) for the mentioned log fields. The returned values are encoded in JSON array.

For example, the following query returns all the values for the ip field over logs for the last 5 minutes:

_time:5m | stats values(ip) ips

See also:

Stream context

LogsQL will support the ability to select the given number of surrounding log lines for the selected log lines on a per-stream basis.

See the Roadmap for details.

Transformations

It is possible to perform various transformations on the selected log entries at client side with jq, awk, cut, etc. Unix commands according to these docs.

LogsQL will support the following transformations for the selected log entries:

  • Extracting the specified fields from text log fields according to the provided pattern.
  • Extracting the specified fields from JSON strings stored inside log fields.
  • Extracting the specified fields from logfmt strings stored inside log fields.
  • Creating a new field from existing log fields according to the provided format.
  • Creating a new field according to math calculations over existing log fields.
  • Parsing duration strings into floating-point seconds for further stats calculations.
  • Creating a boolean field with the result of arbitrary post-filters applied to the current fields.
  • Creating an integer field with the length of the given field value. This can be useful for stats calculations.

See the Roadmap for details.

Post-filters

It is possible to perform post-filtering on the selected log entries at client side with grep or similar Unix commands according to these docs.

LogsQL will support post-filtering on the original log fields and fields created by various transformations. The following post-filters will be supported:

See the Roadmap for details.

Stats

Stats over the selected logs can be calculated via stats pipe.

LogsQL will support calculating the following additional stats based on the log fields and fields created by transformations:

It will be possible specifying an optional condition filter when calculating the stats. For example, sum(response_size) if (is_admin:true) calculates the total response size for admins only.

It is possible to perform stats calculations on the selected log entries at client side with sort, uniq, etc. Unix commands according to these docs.

Sorting

By default VictoriaLogs sorts the returned results by _time field if their total size doesn't exceed -select.maxSortBufferSize command-line value (by default it is set to 1MB). Otherwise sorting is skipped because of performance reasons.

Use sort pipe for sorting the results.

Limiters

LogsQL provides the following pipes for limiting the number of returned log entries:

Querying specific fields

Specific log fields can be queried via fields pipe.

Numeric values

LogsQL accepts numeric values in the following formats:

Short numeric values

LogsQL accepts integer and floating point values with the following suffixes:

  • K and KB - the value is multiplied by 10^3
  • M and MB - the value is multiplied by 10^6
  • G and GB - the value is multiplied by 10^9
  • T and TB - the value is multiplied by 10^12
  • Ki and KiB - the value is multiplied by 2^10
  • Mi and MiB - the value is multiplied by 2^20
  • Gi and GiB - the value is multiplied by 2^30
  • Ti and TiB - the value is multiplied by 2^40

All the numbers may contain _ delimiters, which may improve readability of the query. For example, 1_234_567 is equivalent to 1234567, while 1.234_567 is equivalent to 1.234567.

Duration values

LogsQL accepts duration values with the following suffixes at places where the duration is allowed:

  • ns - nanoseconds. For example, 123ns.
  • µs - microseconds. For example, 1.23µs.
  • ms - milliseconds. For example, 1.23456ms
  • s - seconds. For example, 1.234s
  • m - minutes. For example, 1.5m
  • h - hours. For example, 1.5h
  • d - days. For example, 1.5d
  • w - weeks. For example, 1w
  • y - years as 365 days. For example, 1.5y

Multiple durations can be combined. For example, 1h33m55s.

Internally duration values are converted into nanoseconds.

Performance tips

  • It is highly recommended specifying time filter in order to narrow down the search to specific time range.
  • It is highly recommended specifying stream filter in order to narrow down the search to specific log streams.
  • Move faster filters such as word filter and phrase filter to the beginning of the query. This rule doesn't apply to time filter and stream filter, which can be put at any place of the query.
  • Move more specific filters, which match lower number of log entries, to the beginning of the query. This rule doesn't apply to time filter and stream filter, which can be put at any place of the query.