mirror of
https://github.com/uhi22/pyPLC.git
synced 2025-03-20 02:14:54 +00:00
1,016 B
1,016 B
Todos
- PevMode: PreChargeReq: Fill EVRESSSOC, EVTargetVoltage, EVTargetCurrent
- PevMode: PowerDeliveryReq: Fill EVRESSSOC, Stop/Start
- PevMode: CurrentDemandReq: Fill EVRESSSOC, EVTargetCurrent, EVTargetVoltage
- EvseMode: CurrentDemandRes: Fill EVSEPresentVoltage, EVSEPresentCurrent, EVSEMaximumVoltageLimit, ...LimitAchieved
- EvseMode: Fill V2G messages as far as needed, to convince the car to accept it.
- PevMode: Fill V2G messages as far as needed, to convince the charger to accept it.
- PevMode: Find out the SLAC issue on Supercharger and Compleo.
- PevMode: Connect the inlet voltage measurement
- PevMode: Connect the control of CP
- PevMode: Connect the control of Relay
- improve docu (update layer diagram, improve hardware docu, add link to evse which provides the 5% PWM)
- in addressManager, replace the print by addToTrace
- Resolve the todo-markers in the code
- Still fixed addresses (MAC, IP) used somewhere?
- (and much more)