mirror of
https://github.com/uhi22/pyPLC.git
synced 2024-11-10 01:05:42 +00:00
1.8 KiB
1.8 KiB
Todos
- Decode CableCheckRes."DC_EVSEStatus.EVSEStatusCode": dinDC_EVSEStatusCodeType as readable text
- Decode CableCheckRes."DC_EVSEStatus.EVSEIsolationStatus": dinisolationLevelType as readable text
- Encoder: PreChargeReq: is it possible to enable the units for EVTargetVoltage and EVTargetCurrent?
- Encoder: CurrentDemandReq: is it possible to enable the units for EVTargetVoltage and EVTargetCurrent?
- Find out, why Alpi reports CableCheckRes = Finished FAILED in v0.4
- Find out, why Compleo ignores the PowerDeliveryReq START in v0.4
- Add date/time into ExiLog
- PevMode: Add state transition in case of failed CableCheck
- PevMode: PreChargeReq: Fill EVRESSSOC, EVTargetVoltage, EVTargetCurrent
- PevMode: PowerDeliveryReq: Fill EVRESSSOC, Stop/Start
- PevMode: CurrentDemandReq: Fill EVRESSSOC, EVTargetCurrent, EVTargetVoltage
- EvseMode: CurrentDemandRes: Fill EVSEPresentVoltage, EVSEPresentCurrent, EVSEMaximumVoltageLimit, ...LimitAchieved
- EvseMode: Fill V2G messages as far as needed, to convince the car to accept it.
- PevMode: Fill V2G messages as far as needed, to convince the charger to accept it.
- PevMode: Find out the SLAC issue on Supercharger and Compleo.
- PevMode: Connect the inlet voltage measurement
- PevMode: Connect the control of CP
- PevMode: Connect the control of Relay
- docu: add link to evse which provides the 5% PWM)
- docu: add hardwareInterface into software architecture puml
- docu: create hardware architecture picture
- docu for Dieter (Schematic, concept idea, DieterLV, DieterHV, ...)
- add OLED display to the PEV controller
- in addressManager, replace the print by addToTrace
- Resolve the todo-markers in the code
- Still fixed addresses (MAC, IP) used somewhere?
- (and much more)