mirror of
https://github.com/uhi22/pyPLC.git
synced 2024-11-20 01:13:58 +00:00
25 lines
815 B
Markdown
25 lines
815 B
Markdown
# PLC EVSE
|
|
|
|
For use together with pyPLC.
|
|
|
|
This is a KiCad 8 project. Only the schematic, no board.
|
|
|
|
### BOM
|
|
|
|
* C1, C2, C3: elcap, 100µF, 25V
|
|
* C20: ceramic, 1nF (something between 1nF and 2.2nF is fine)
|
|
* U1: op-amp LF355
|
|
* U2, U3: isolated DCDC converter, 5V to 12V, 1W, e.g. B0512S-1WR3
|
|
* R1: 1k
|
|
* R2: 270ohm
|
|
* R5: 56k
|
|
* R6: 100k
|
|
* R7: 220k
|
|
* R8, R9: 120k (does not really matter, also 100k would be fine)
|
|
* R20: 180ohm (does not really matter. Something between 100ohm and 330ohm.)
|
|
* D1, D2: LEDs WS2812B. Also one would be sufficient.
|
|
* RV1: potentiometer e.g. 10k linear (also 1k or 22k would be fine)
|
|
* A1: Arduino Nano
|
|
* Prototyping board 100mm x 106mm
|
|
* Housing 3D printed, FreeCad mini-evse-housing.FCStd, or step: mini-evse-housing.step
|
|
* For power supply: USB A cable, cutted and soldered to the board.
|