Old CPU Accuracy setting won't translate well into since we're adding
one at the beginning of the list. On first boot with the new setting,
just use the default setting.
The current CPU accuracy settings in yuzu are fairly polarized and
require more than common knowledge to know what the optimal settings for
yuzu would be. This adds a curated option called 'Auto' that applies a
few at the moment known-good unsafe optimizations to Dynarmic.
Slight improvements to readability.
Dropped suggestions for string_view (settings.h:101), pass by value
(settings.h:82), reverting double to a float (config.cpp:316), and other
smaller ones, some out of scope.
Addresses review feedback.
Co-authored-by: Ameer J <52414509+ameerj@users.noreply.github.com>
Creates a new BasicSettings class in common/settings, and forces setting
a default and label for each setting that uses it in common/settings.
Moves defaults and labels from both frontends into common settings.
Creates a helper function in each frontend to facillitate reading the
settings now with the new default and label properties.
Settings::Setting is also now a subclass of Settings::BasicSetting. Also
adds documentation for both Setting and BasicSetting.
There are a lot of scenarios where we don't particularly care whether or not the removal operation and just simply attempt a removal.
As such, removing the [[nodiscard]] attribute is best for these functions.
This introduces a new setting Enable FS Access Log which saves the filesystem access log to sdmc:/FsAccessLog.txt
If this setting is not enabled, this will indicate to FS to not call OutputAccessLogToSdCard.
Fixes softlocks during loading in Xenoblade Chronicles 2 when certain DLC is enabled.
Causes a heap-use-after free reported by AddressSanitizer. This makes
use of std::filesystem::path, but due to that we have to use their
string() function which may not work for all characters.
Builds on german77's work to reset all settings back to their defaults.
This include UISettings and Settings values structs, but does not affect
save profiles, input profiles, and game directories.
This works from a button input in configure_general. When activated, it
calls a callback to close the whole configure dialog, then GMainWindow
deletes the old configuration, both on disk and in memory, and
reinitalizes a new one. It also resets a portion of the UI and calls the
telemetry window prompt.
This commit does not compile.
Initial work to add and connect a Reset to Defaults button to the
configure_general tab.
Co-authored-by: german77 <juangerman-13@hotmail.com>
Currently with programs that have a 0 title id, yuzu loads the custom
configuration 0000000000000000.ini for per-game configs. This is not
ideal since many homebrews share this id. Instead for these programs, we
load a config that is simply the file name and `.ini` appended to it.
* common: fs: fs_types: Create filesystem types
Contains various filesystem types used by the Common::FS library
* common: fs: fs_util: Add std::string to std::u8string conversion utility
* common: fs: path_util: Add utlity functions for paths
Contains various utility functions for getting or manipulating filesystem paths used by the Common::FS library
* common: fs: file: Rewrite the IOFile implementation
* common: fs: Reimplement Common::FS library using std::filesystem
* common: fs: fs_paths: Add fs_paths to replace common_paths
* common: fs: path_util: Add the rest of the path functions
* common: Remove the previous Common::FS implementation
* general: Remove unused fs includes
* string_util: Remove unused function and include
* nvidia_flags: Migrate to the new Common::FS library
* settings: Migrate to the new Common::FS library
* logging: backend: Migrate to the new Common::FS library
* core: Migrate to the new Common::FS library
* perf_stats: Migrate to the new Common::FS library
* reporter: Migrate to the new Common::FS library
* telemetry_session: Migrate to the new Common::FS library
* key_manager: Migrate to the new Common::FS library
* bis_factory: Migrate to the new Common::FS library
* registered_cache: Migrate to the new Common::FS library
* xts_archive: Migrate to the new Common::FS library
* service: acc: Migrate to the new Common::FS library
* applets/profile: Migrate to the new Common::FS library
* applets/web: Migrate to the new Common::FS library
* service: filesystem: Migrate to the new Common::FS library
* loader: Migrate to the new Common::FS library
* gl_shader_disk_cache: Migrate to the new Common::FS library
* nsight_aftermath_tracker: Migrate to the new Common::FS library
* vulkan_library: Migrate to the new Common::FS library
* configure_debug: Migrate to the new Common::FS library
* game_list_worker: Migrate to the new Common::FS library
* config: Migrate to the new Common::FS library
* configure_filesystem: Migrate to the new Common::FS library
* configure_per_game_addons: Migrate to the new Common::FS library
* configure_profile_manager: Migrate to the new Common::FS library
* configure_ui: Migrate to the new Common::FS library
* input_profiles: Migrate to the new Common::FS library
* yuzu_cmd: config: Migrate to the new Common::FS library
* yuzu_cmd: Migrate to the new Common::FS library
* vfs_real: Migrate to the new Common::FS library
* vfs: Migrate to the new Common::FS library
* vfs_libzip: Migrate to the new Common::FS library
* service: bcat: Migrate to the new Common::FS library
* yuzu: main: Migrate to the new Common::FS library
* vfs_real: Delete the contents of an existing file in CreateFile
Current usages of CreateFile expect to delete the contents of an existing file, retain this behavior for now.
* input_profiles: Don't iterate the input profile dir if it does not exist
Silences an error produced in the log if the directory does not exist.
* game_list_worker: Skip parsing file if the returned VfsFile is nullptr
Prevents crashes in GetLoader when the virtual file is nullptr
* common: fs: Validate paths for path length
* service: filesystem: Open the mod load directory as read only
Most of the code already exists to do this, but the Apply button itself
was never added. This adds a button and boolean that tells yuzu to save
the configuration after applying settings, even if close/Cancel is
pressed on the dialog. Changes after applying will not be saved when
Cancel is pressed, though.
Drops an unused variant of ApplyPerGameSetting, and turns the QComboBox
variants of SetPerGameSetting into a template.
Co-authored-by: Ameer J <52414509+ameerj@users.noreply.github.com>
Duplicate labels were unintentionally introduced due to copy-paste. This silences the compilation warning produced by the presence of these duplicates.
Allows setting CPU accuracy to Accurate or Unsafe per-game, as well as
the accuracy options for Unsafe. Debug is not allowed here as a per-game
CPU accuracy.
Originally, every time we add a per-game setting, we'd have to guard for
it when setting it on the global config, and use a specific function to
do it for the per-game config.
This moves the global check into the ApplyPerGameSetting function so
that we can use it for changing both the global and per-game states.
Less work for the programmer.
- This is a developer-only setting and no longer needs to be enabled by default.
- Also adds "use_auto_stub" setting to SDL frontend while we are here.
- Supersedes #1340.
Several issues have been reported with the borderless windowed fullscreen mode on *nix platforms. Default to exclusive fullscreen mode on these platforms for now.
The borderless windowed fullscreen mode solves several issues with the presentation of the overlay dialogs and on-screen keyboard in exclusive fullscreen mode, and also has other benefits such as smoother gameplay, lower latency and a significant reduction in screen tearing.
Co-authored-by: Its-Rei <kupfel@gmail.com>
Address Sanitizer reports stack-use-after-scope on line 231
`vulkan_devices.push_back(QString::fromStdString(name));`. Instead of
using a pointer, copy the string into a std::string and use that,
instead.
Auto-stub is an experimental debugging feature that may cause unforseen bugs. This adds a toggle to only allow auto-stubbing unimplemented functions when explicitly enabled when yuzu is launched.
Due to BindBufferRangeNV limitations and poor quality code emission from
our side, assembly shaders are currently slower than GLSL. Their build
time and feature advantages are still relevant, but they are outweighted
by their runtime performance.
Instead of using a two step initialization to report errors, initialize
the GPU renderer and rasterizer on the constructor and report errors
through std::runtime_error.
The function is unused if YUZU_ENABLE_BOXCAT is disabled, causing a
-Wunused-funciton error when compiled.
Wrapping it with `#ifdef YUZU_ENABLE_BOXCAT` to prevent compiling the
function when the variable is disabled. Opting to not use [[maybe
unused]] in case the function is totally unused in the future.
QRegularExpression was introduced in Qt 5 as a better replacement for
QRegExp. In Qt 6.0 QRegExp is removed entirely.
To remain forward compatible with Qt 6.0, we can transition over to
using QRegularExpression.
This tab of the settings is already extremely bloated and the setting itself is quite useless.
With a gamelist of almost 30 games, the cache directory is smaller than 1MB for me and therefore I don't see why it needs to be configurable.
Increases the controller connection delay to 60ms and refactors it to attempt to disconnect all controllers prior to connecting all controllers in HID.
Since this is inside a string literal, backslashes that are part of
regex syntax have to be escaped. But that's ugly, so convert to a raw
string instead.
Removes all remaining usages of the global system instance. After this,
migration can begin to migrate to being constructed and managed entirely
by the various frontends.
Not all controllers have a SDL_GameController binding. This caused controllers not present in the SDL GameController database to have buttons mapped instead of axes.
Furthermore, it was not possible to invert the axes when it could be useful such as emulating a horizontal single joycon or other potential cases. This allows us to invert the axes by reversing the order of mapping (vertical, then horizontal).
