PKGBUILDs/core/linux-armv5-rc/0005-at91-ariag25-updates.patch

94 lines
2.4 KiB
Diff
Raw Normal View History

2015-06-15 02:34:34 +00:00
From eb51d1cb5bce9627563695e385b39b891e998a4c Mon Sep 17 00:00:00 2001
2015-04-28 03:06:02 +00:00
From: Douglas Gilbert <[mailto:dgilbert@interlog.com]>
Date: Mon, 12 Aug 2013 10:36:25 -0500
2015-06-15 02:34:34 +00:00
Subject: [PATCH 5/6] at91: ariag25 updates
2015-04-28 03:06:02 +00:00
v2: dropped at91sam9x5 usart fix, as merged mainline
Signed-off-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
---
arch/arm/boot/dts/at91-ariag25.dts | 39 +++++++++++++++++++++++++++++++++++---
1 file changed, 36 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts
index e9ced30..8308515 100644
--- a/arch/arm/boot/dts/at91-ariag25.dts
+++ b/arch/arm/boot/dts/at91-ariag25.dts
@@ -117,7 +117,7 @@
* following can be overwritten by bootloader:
* for example u-boot 'ftd set' command
*/
- local-mac-address = [00 00 00 00 00 00];
+ local-mac-address = [00 04 25 ef 00 00];
status = "okay";
};
@@ -127,13 +127,41 @@
* Change to "okay" if you need additional serial ports
*/
uart0: serial@f8040000 {
- status = "disabled";
+ status = "okay";
};
uart1: serial@f8044000 {
status = "disabled";
};
+ spi0: spi@f0000000 {
+ status = "okay";
+ cs-gpios = <&pioA 14 0>, <0>, <0>, <0>;
+ anything@0 {
+ compatible = "spidev";
+ // spi-max-frequency = <50000000>; // 50 MHz
+ spi-max-frequency = <5000000>; // 5 MHz
+ reg = <0>;
+ };
+ // m25p80@0 {
+ // compatible = "spidev";
+ // spi-max-frequency = <50000000>;
+ // reg = <0>;
+ // };
+
+ mmc-slot@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ voltage-ranges = <3300 3300>;
+ // Use one of next 3 lines, comment out other 2
+ gpios = <&pioA 26 0>; /* CD to PA26 */
+ // broken-cd;
+ // non-removable;
+ cd-inverted;
+ spi-max-frequency = <8000000>;
+ };
+ };
+
adc0: adc@f804c000 {
status = "okay";
atmel,adc-channels-used = <0xf>;
@@ -146,7 +174,7 @@
pinctrl@fffff400 {
w1_0 {
pinctrl_w1_0: w1_0-0 {
- atmel,pins = <0 21 0x0 0x1>; /* PA21 PIO, pull-up */
+ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
};
};
};
@@ -154,6 +182,11 @@
rtc@fffffeb0 {
status = "okay";
};
+
+ watchdog@fffffe40 {
+ /* timeout-sec = <14>; */
+ status = "okay";
+ };
};
usb0: ohci@00600000 {
--
2015-06-15 02:34:34 +00:00
2.4.3
2015-04-28 03:06:02 +00:00