vmselect will create `./tmp` dir under `cacheDataPath`. If
`cacheDataPath` is set to `/`, vmselect will use `/tmp`.
content under `/tmp` dir might be auto removed based on the OS
behaviour. See:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5770
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
…eep_metric_names` options in stream aggregation config together
With aggregated data and raw data under the same metric, results would
be confusing.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 62d19369a3)
### Describe Your Changes
typos fix & clarity improvement of vmanomaly docs after v1.15.1 release
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit a99fcfbf1a)
### Describe Your Changes
Updated user management guide with new cloud content
This PR should be merged after the cloud PR
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
This helps to improve reliability of performing backups in environments
with unreliable connection and tolerate temporary errors at S3 provider
side.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6732
Default retry timeout is up to 3 minutes to make this consistent with
the same configuration for GCS:
a05317f61f/lib/backup/gcsremote/gcs.go (L70-L76)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit cb00b4b00f)
Before, buffer growth was always x2 of its size, which could lead to
excessive memory usage when processing big amount of data.
For example, scraping a target with hundreds of MBs in response could
result into hih memory spikes in vmagent because buffer has to double
its size to fit the response. See
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6759
The change smoothes out the growth rate, trading higher allocation rate
for lower mem usage at certain conditions.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f28f496a9d)
### Describe Your Changes
* `sort` param is unused by the current website engine, and was present only for compatibility
with previous website engine. It is time to remove it as it makes no effect
* re-structure guides content into folders to simplify assets management
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 35d77a3bed)
### Describe Your Changes
Fixing remaining typos and missing words after v.1.15.0 updates
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 264e9caf5a)
### Describe Your Changes
- updated docs on `vmanomaly` with v1.15.0
- additional chapters of FAQ and model pages
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit b670fa1a29)
VM has different responses to equivalent queries for MetricsQL and
GraphiteQL in case of failed access to one of vmstorage node of the
cluster vmstorage nodes. For GraphiteQL, the denyPartialResponse feature
is not used, it is always true, which is not always correct (depending
on the configuration).
In the PR I have removed the hardcoded denyPartialResponse for
GraphiteQL, just like MetricsQL does.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
The resetState arg was used only for the BenchmarkAggregatorsFlushInternalSerial benchmark.
This benchmark was testing aggregate state flush performance by keeping the same state across flushes.
The benhmark didn't reflect the performance and scalability of stream aggregation in production,
while it led to non-trivial code changes related to resetState arg handling.
So let's drop the benchmark together with all the code related to resetState handling,
in order to simplify the code at lib/streamaggr a bit.
Thanks to @AndrewChubatiuk for the original idea at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6314
Prevsiously every aggregation output was using its own timestamp for the output aggregated samples
in a single aggregation interval. This could result in unexpected inconsitent timesetamps for the output
aggregated samples.
This commit consistently uses the same timestamp across all the output aggregated samples.
This commit makes sure that the duration between subsequent timestamps strictly equals
the configured aggregation interval.
Thanks to @AndrewChubatiuk for the original idea at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6314
This commit should help https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4580
Make `-remoteWrite.streamAggr.ignoreFirstIntervals` of array type so it could
accept multiple values which can be applied to the corresponding`-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8f5c26d788)
Fix `-streamAggr.dropInputLabels` behavior when global deduplication is enabled without `-streamAggr.config`.
Previously, `-remoteWrite.streamAggr.dropInputLabels` is misapplied.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4863605469)
By introducing this feature, users will have the ability to customize
the sampleLimit parameter on a per-target basis, providing more
flexibility and control over the job execution behavior.
(cherry picked from commit 994796367b)
The error check was needed before a84491324d
It was kept by mistake and makes no sense to have rn.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9726e6c1a2)
### Describe Your Changes
fixed yaml header in a guide doc, that causes hugo build error
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 86b473c476)
### Describe Your Changes
- Adds support for displaying the top 5 log streams in the hits graph,
grouping the remaining streams into an "other" label.
#6545
- Adds options to customize the graph display with bar, line, stepped
line, and points views.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 04c2232e45)
The changes are based on SEO report and supposed to improve
ranking and indexation by search engines by using prompt and unique titles
and by updating unreachable links.
It also updates links to have a simplified form and replaces relative links with absolute links
according to https://docs.victoriametrics.com/#documentation
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 2e16732fdb)
Adds Prometheus Grafana Alloy and vmagent to the data ingestion
protocols. Grafana Agent was not added since it has been deprecated in
favor of alloy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit a46d554f74)
### Describe Your Changes
https://victoriametrics.slack.com/archives/C05UNTPAEDN/p1722833182319299
Sometimes users may use the wrong (lower) version of Grafana when
setting up the VictoriaLogs datasource.
It would be good to document the requirements of Grafana versions to use
VictoriaMetrics/VictoriaLogs datasource.
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 7551d799f7)
### Describe Your Changes
Fix a typo in docs.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 3c48e5662f)
### Describe Your Changes
This is useful for clients which validate InfluxDB is available before
data ingestion can be started.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6653
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9877a5e7d5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Added `--vm-backoff-retries`, `--vm-backoff-factor`,
`--vm-backoff-min-duration` and `--vm-native-backoff-retries`,
`--vm-native-backoff-factor`, `--vm-native-backoff-min-duration`
command-line flags to the `vmctl` app. Those changes will help to
configure the retry backoff policy for different situations.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6622
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6f401daacb)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* add a toggle button to the "Group" tab that allows users to expand or collapse all groups at once
* introduce the ability to select a key for grouping logs within the "Group" tab
* display the number of entries within each log group.
* move the Markdown toggle to the general settings panel in the upper left corner.
(cherry picked from commit e06a19d85f)
Changes to .ts files in vmui or vmui for logs require re-building
static files that will be included into compiled binary afterwards.
We don't update static files on each .ts change PR because it results
in too many changes and complicates review.
So we need to update these static files before the actual release.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Fixes panic if incorrect metricsql expression passed to the prettifier API.
Prettify function had misleading panic for duration expression formatting. It expected all WITH templates to be already parsed.
But WITH expression expand was removed.
Bug was introduced at e712a49898
and present at v1.98.0+ releases
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6736
Signed-off-by: f41gh7 <nik@victoriametrics.com>
* add Logo guidelines to GitHub Readme, as it may have higher chances to be viewed by users
* rm Logo guidelines from cluster version docs, as it makes no sense anymore for this page
* rm `picutre` tag from cluster version docs, as it is not used by GitHub anymore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 77b768089f)
### Describe Your Changes
- replace docs in root README with a link to official documentation
- remove old make commands for documentation
- remove redundant "VictoriaMetrics" from document titles
- merge changelog docs into a section
- rm content of Single-server-VictoriaMetrics.md as it can be included from docs/README
- add basic information to README in the root folder, so it will be useful for github users
- rm `picture` tag from docs/README as it was needed for github only, we don't display VM logo at docs.victoriametrics.com
- update `## documentation` section in docs/README to reflect the changes
- rename DD pictures, as they now belong to docs/README
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 58e667c895)
Signed-off-by: hagen1778 <roman@victoriametrics.com>