This reverts commit 6e395048d3.
Reason for revert: the previous logic was correct.
The purpose of `-search.maxSamplesPerQuery` command-line flag is to limit the amounts of CPU resources,
which could be taken by a single query - see https://docs.victoriametrics.com/#resource-usage-limits .
VictoriaMetrics processes samples in blocks during querying - it reads the block, then unpacks it,
then filters out samples outside the selected time range. This means that it _spends CPU time_
on reading and unpacking of _all the samples_ in every block on the requested time range,
even if only a single sample per each block matches the given time range.
The previous logic was effectively limiting CPU time a single query could take.
The new logic fails limiting CPU time a single query could take in some pathological cases
when only a small fraction of samples per each requested block fit the requested time range.
This allows performing multiplication DoS-attacks by querying very narrow time ranges over historical blocks,
which tend to be full. For example, if the `-search.maxSamplesPerQuery` equals to a billion,
and the query requests a single sample out of 8K samples per each block, this means that the query
may unpack a billion of such blocks without exceeding the limit, e.g. it may unpack and process 8K*1e9=8e12 samples.
This is not what the resource usage limits were created for originally - see https://docs.victoriametrics.com/#resource-usage-limits
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6464
This reverts commit 92b22581e6.
Reason for revert: too complex and slow approach for spellchecking task.
This approach may significantly slow down development pace. It also may take non-trivial
amounts of additional time and resources at CI/CD because of all this npm shit at cspell directory.
Note to @arkid15r : the idea with the ability to run spellchecker on all the VictoriaMetrics
codebase is great. But this shouldn't be mandatory pre-commit check. It is enough to have
a Makefile rule like `make spellcheck`, which could be run manually whenever spellcheck is needed
(e.g. once per month or once per quarter).
Reason for revert: this commit doesn't resolve real security issues,
while it complicates the resulting code in subtle ways (aka security circus).
Comparison of two strings (passwords, auth keys) takes a few nanoseconds.
This comparison is performed in non-trivial http handler, which takes thousands
of nanoseconds, and the request handler timing is non-deterministic because of Go runtime,
Go GC and other concurrently executed goroutines. The request handler timing is even
more non-deterministic when the application is executed in shared environments
such as Kubernetes, where many other applications may run on the same host and use
shared resources of this host (CPU, RAM bandwidth, network bandwidth).
Additionally, it is expected that the passwords and auth keys are passed via TLS-encrypted connections.
Establishing TLS connections takes additional non-trivial time (millions of nanoseconds),
which depends on many factors such as network latency, network congestion, etc.
This makes impossible to conduct timing attack on passwords and auth keys in VictoriaMetrics components.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6423/files
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6392
mention change for
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6457
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
With the recent release of Managed VictoriaMetrics users are able to
create and execute Alerting & Recording rules and send notifications via
hosted Alertmanager.
So, we're publishing Alertmanager configuration docs for Managed
VictoriaMetrics.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Trimming content which is loaded from an external pass leads to obscure
issues in case user-defined input contained trimmed chars. For example.
user-defined password "foo\n" will become "foo" while user will expect
it to contain a new line.
---
For example, a user defines a password which ends with `\n`. This often
happens when user Kubernetes secrets and manually encodes value as
base64-encoded string.
In this case vmauth configuration might look like:
```
users:
- url_prefix:
- http://vminsert:8480/insert/0/prometheus/api/v1/write
name: foo
username: foo
password: "foobar\n"
```
vmagent configuration for this setup will use the following flags:
```
-remoteWrite.url=http://vmauth:8427/
-remoteWrite.basicAuth.passwordFile=/tmp/vmagent-password
-remoteWrite.basicAuth.username="foo"
```
Where `/tmp/vmagent-password` is a file with `foobar\n` password.
Before this change such configuration will result in `401 Unauthorized`
response received by vmagent since after file content will become
`foobar`.
---
An example with Kubernetes operator which uses a secret to reference the
same password in multiple configurations.
<details>
<summary>See full manifests</summary>
`Secret`:
```
apiVersion: v1
data:
name: Zm9v # foo
password: Zm9vYmFy # foobar\n
username: Zm9v= # foo
kind: Secret
metadata:
name: vmuser
```
`VMUser`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMUser
metadata:
name: vmagents
spec:
generatePassword: false
name: vmagents
targetRefs:
- crd:
kind: VMAgent
name: some-other-agent
namespace: example
username: foo
# note - the secret above is referenced to provide password
passwordRef:
name: vmagent
key: password
```
`VMAgent`:
```
apiVersion: operator.victoriametrics.com/v1beta1
kind: VMAgent
metadata:
name: example
spec:
selectAllByDefault: true
scrapeInterval: 5s
replicaCount: 1
remoteWrite:
- url: "http://vmauth-vmauth-example:8427/api/v1/write"
# note - the secret above is referenced as well
basicAuth:
username:
name: vmagent
key: username
password:
name: vmagent
key: password
```
</details>
Since both config target exactly the same `Secret` object it is expected
to work, but apparently the result will be `401 Unauthrized` error.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Added a bar chart displaying the number of log entries over a time
range.
#6404
- When `_msg` is empty, all fields are displayed in a single line.
- Added double quotes when copying pairs: `key: "value"`.
- Minor style adjustments.
Check for ranged vector arguments in aggregate expressions when
`-search.disableImplicitConversion` or `-search.logImplicitConversion`
are enabled.
For example, `sum(up[5m])` will fail to execute if these flags are set.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [*] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Added config example for `min_dev_from_expected` arg; also, small
styling fixes and alignments
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
### Describe Your Changes
small fix of typos in v1.13 presets (vmanomaly docs)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
* check if `lastValue` was seen at least twice with different
timestamps. Otherwise, the difference between last timestamp and
previous timestamp could be `0` and will result into `NaN` calculation
* check if there items left in lastValue map after staleness cleanup.
Otherwise, `rate_avg` could have produce `NaN` result.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
### Describe Your Changes
Fix 404 relative img links for v1.13.0 update of vmanomaly docs
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
value→valid
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Lapo Luchini <lapo@lapo.it>
Add support for markdown format and emoji for the `_msg` field in the
"Group" view.
Add markdown rendering toggle. Disabled by default. Value is stored in
`localStorage`.
It is better to remove deprecated flag completely, so vmctl will
fail if this flag is used and user can immediately fix the issue.
Before, flag was ignored and it is worse then fail fast.
follow-up after 8b46bb0c41 (diff-2bfab3db5cc1baf4c6d3ff6b19901926e3bdf4411ec685dac973e5fcff1c723b)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* adds idleConnTimeout flag, which must reduce probability of `broken
pipe` and `connection reset` errors.
* one-time retry trivial network requests for the same backend
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* deprecate `--vm-disable-progress-bar` in favour of `--disable-progress-bar`
* new `--disable-progress-bar` consistently disables usage of progress bar
for all migration modes.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6367
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Use bytesutil.InternString() instead of strings.Clone() for inputKey and outputKey in aggregatorpushSamples().
This should reduce string allocation rate, since strings can be re-used between aggrState flushes.
- Reduce memory allocations at dedupAggrShard by storing dedupAggrSample by value in the active series map.
- Remove duplicate call to bytesutil.InternBytes() at Deduplicator, since it is already called inside dedupAggr.pushSamples().
- Add missing string interning at rateAggrState.pushSamples().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6402
The main change is getting rid of interning of sample key. It was
discovered that for cases with many unique time series aggregated by
vmagent interned keys could grow up to hundreds of millions of objects.
This has negative impact on the following aspects:
1. It slows down garbage collection cycles, as GC has to scan all inuse
objects periodically. The higher is the number of inuse objects, the
longer it takes/the more CPU it takes.
2. It slows down the hot path of samples aggregation where each key
needs to be looked up in the map first.
The change makes code more fragile, but suppose to provide performance
optimization for heavy-loaded vmagents with stream aggregation enabled.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
### Describe Your Changes
Added streamaggr metrics to:
- `vm_streamaggr_samples_lag_seconds` - samples lag
- `vm_streamaggr_ignored_samples_total{reason="nan"}` - ignored NaN
samples
- `vm_streamaggr_ignored_samples_total{reason="too_old"}` - ignored old
samples
### Describe Your Changes
Fix for issue #6396: according to rmdir manpage, ENOTEMPTY and EEXIST
should be treated equally
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6396
### Checklist
The following checks are **mandatory**:
- [x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Ludovic Pollet <ludovic.pollet@exfo.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Unsupported path is already handled by `lib/httpserver`.
This prevents from misleading errors in logs caused by double-writing response headers.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Scratch based images will be using a separate tag: "(version)-scratch"
and will be built for the same architecture as regular images.
This is useful for environments with higher security standards. In this
case using alpine as base layer requires updating images more frequently
in order to get the latest updates for the base image, even in case the
user did not need to update VictoriaMetrics version.
Tested that scratch images work for:
- vmagent - enterprise with kafka and opensource
- cluster
- single-node
No issues observed so far.
cc: @tenmozes
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* "*.idleConnTimeout" flags must reduce probability of `write: broken
pipe` and `read: connection reset by peer` errors Those errors may occur
if remote server closes TCP socket for connection, while it's still
exist at client.
* single time retries for `write: broken pipe` and `read: connection
reset by peer` must handle a case for incorrectly configured timeouts at
middleware proxies, mitigate minor network issues.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5661
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
Fix typo in link.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Update wording to highlight that cache is not persistent if flag is
value is empty. Previously, it was not clear if cache is not used at all
or just not persistent.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It allows to create alert for possible item drops at indexdb. It may
happen, if ingested metric size exceeds max indexdb item size.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* It must reduce memory usage for misbehaving clients. Since
VictoriaMetrics stores sparse index inmemory.
* Reduce disk space usage for indexdb.
* Prevent possible indexDB items drops.
* It may trigger slow insert and new timeseries registration due to
default value for flag change
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6176
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This PR fixes an issue where parsing long `_msg` values caused errors,
resulting in some log records not being displayed.
The error occurred due to partial processing of strings. In some cases,
a long record could be split into multiple chunks, causing only part of
the record to be processed instead of the entire entry.
#6281
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This should improve precision of `restarts` and `version change` annotations when
zooming-in/zooming-out on the dashboards.
The change also makes `restarts` dashboard visible on the panels, so user can disable it from
displaying if needed. This could be useful when restarts overlap with version change events.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* The new flag can be used for for skipping TLS certificates
verification when connecting to S3 endpoint. Affects vmbackup,
vmrestore, vmbackupmanager.
* replace deprecated `EndpointResolver` with `BaseEndpoint`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1056
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The error appears when executing annotations query against Prometheus backend
because the query itself hasn't specified look-behind window (which is allowed
in VictoriaMetrics query engine).
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6309
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Prevent excessive resource usage when stream aggregation config file
contains no matchers by prevent pushing data into Aggregators object.
Before this change a lot of extra work was invoked without reason.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Occasionally, vmagent sends empty blocks to downstream servers. If a
downstream server returns an unexpected response, vmagent gets stuck in
a retry loop. While vmagent handles 400 and 409 errors, there are
various prometheus remote write implementations that return different
error codes. For example, vector returns a 422 error. To mitigate the
risk of vmagent getting stuck in a retry loop, it is advisable to skip
sending empty blocks to downstream servers.
Co-authored-by: hao.peng <hao.peng@smartx.com>
Co-authored-by: Zhu Jiekun <jiekun.dev@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* adds datadog extensions for statsd:
- multiple packed values (v1.1)
- additional types distribution, histogram
* adds type check and append metric type to the labels with special tag
name `__statsd_metric_type__`. It simplifies streaming aggregation
config.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Allocations are reduced by implementing custom json parser via fastjson
lib.
The change also re-uses `promInstant` object in attempt to reduce number
of
allocations when parsing big responses, as usually happens with heavy
recording rules.
```
name old allocs/op new allocs/op delta
ParsePrometheusResponse/Instant-10 9.65k ± 0% 5.60k ± 0% ~ (p=1.000 n=1+1)
```
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
it's needed to remove Summary metric type from the global state of
metrics package. metrics package tracks each bucket of summary and
periodically swaps old buckets with new.
Simple set unregister is not enough to release memory used by Set
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6247
Added `rate` and `rate_avg` output
Resource usage is the same as for increase output, tested on a benchmark
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html):
allow configuring `-remoteWrite.disableOnDiskQueue` and
`-remoteWrite.dropSamplesOnOverload` cmd-line flags per each
`-remoteWrite.url`. See this [pull
request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065).
Thanks to @rbizos for implementaion!
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add
labels `path` and `url` to metrics
`vmagent_remotewrite_push_failures_total` and
`vmagent_remotewrite_samples_dropped_total`. Now number of failed pushes
and dropped samples can be tracked per `-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Raphael Bizos <r.bizos@criteo.com>
Set correct suffix `<output>_prometheus` for aggregation outputs
`increase_prometheus` and `total_prometheus`
Before, outputs `total` and `total_prometheus` or `increase` and
`increase_prometheus` had the same suffix.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Though labels compressor is quite resource intensive, each aggregator
and deduplicator instance has it's own compressor. Made it shared across
all aggregators to consume less resources while using multiple
aggregators.
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
### Describe Your Changes
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6041
#### Added
- Added service discovery support for Vultr.
#### Docs
- `CHANGELOG.md`, `sd_configs.md`, `vmagent.md` are updated.
#### Note
- Useful links:
- Vultr API:
https://www.vultr.com/api/#tag/instances/operation/list-instances
- Vultr client SDK: https://github.com/vultr/govultr
- Prometheus SD:
https://github.com/prometheus/prometheus/tree/main/discovery/vultr
---
### Checklist
The following checks are mandatory:
- [X] I have read the [Contributing
Guidelines](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/CONTRIBUTING.md)
- [x] All commits are signed and include `Signed-off-by` line. Use `git
commit -s` to include `Signed-off-by` your commits. See this
[doc](https://git-scm.com/book/en/v2/Git-Tools-Signing-Your-Work) about
how to sign your commits.
- [x] Tests are passing locally. Use `make test` to run all tests
locally.
- [x] Linting is passing locally. Use `make check-all` to run all
linters locally.
Further checks are optional for External Contributions:
- [X] Include a link to the GitHub issue in the commit message, if issue
exists.
- [x] Mention the change in the
[Changelog](https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/docs/CHANGELOG.md).
Explain what has changed and why. If there is a related issue or
documentation change - link them as well.
Tips for writing a good changelog message::
* Write a human-readable changelog message that describes the problem
and solution.
* Include a link to the issue or pull request in your changelog message.
* Use specific language identifying the fix, such as an error message,
metric name, or flag name.
* Provide a link to the relevant documentation for any new features you
add or modify.
- [ ] After your pull request is merged, please add a message to the
issue with instructions for how to test the fix or try the feature you
added. Here is an
[example](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4048#issuecomment-1546453726)
- [x] Do not close the original issue before the change is released.
Please note, in some cases Github can automatically close the issue once
PR is merged. Re-open the issue in such case.
- [x] If the change somehow affects public interfaces (a new flag was
added or updated, or some behavior has changed) - add the corresponding
change to documentation.
Signed-off-by: Jiekun <jiekun.dev@gmail.com>
When at least one remote write has deduplication configured it cleans up
timeseries while they can be in use by another remote write without
deduplication
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The panel will show how many ongoing select queries are processed by vmstorage
and should help to identify resource bottlenecks. See panel description for more details.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Allowing to select multiple instance IPs makes it much easier to view
metrics for longer periods of time in dynamic environments such as
Kubernetes. In k8s update will also cause IP to change making it harder
to use dashboard to check the status.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5869
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The new flag type is supposed to be used for specifying URL values which
could contain sensitive information such as auth tokens in GET params or
HTTP basic authentication.
The URL flag also allows loading its value from files if `file://`
prefix is specified. As example, the new flag type was used in
app/vmbackup as it requires specifying `authKey` param for making the
snapshot.
See related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5973
Thanks to @wasim-nihal for initial implementation
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6060
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Starting from v1.99.0 vmalert could ignore anchors pointing to specific
rule groups if `search` param was present in URL.
This change makes anchors compatible with `search` param in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Using `sh` or `console` formatting doesn't do word-breaking on render. This makes flags description
harder to read, as users need to scroll the web page horizontally.
Removing the formatting renders the description with normal word-breaking.
Stream aggregation may yield inaccurate results if it processes incomplete data.
This issue can arise when data is sourced from clients that maintain a queue of unsent data, such as Prometheus or vmagent.
If the queue isn't fully cleared within the aggregation interval, only a portion of the time series may be included in that period, leading to distorted calculations.
To mitigate this we add an option to ignore first N aggregation intervals. It is expected, that client queues
will be cleared during the time while aggregation ignores first N intervals and all subsequent aggregations
will be correct.
It is better from visibility PoV if the CONTRIBUTING.md file is visible at https://docs.victoriametrics.com/contributing/ .
This page can be indexed by search engines and searched by our users later.
It is also easier to provide a link to this page now comparing to the old link, which is much harder to remember:
https://github.com/VictoriaMetrics/VictoriaMetrics/blob/master/CONTRIBUTING.md
While at it, syncrhonize docs/CONTRIBUTING.md with .github/PULL_REQUEST_TEMPLATE/pull_request_template.md ,
so they do not contain duplicate information, which can be outdated over time. Now all the relevant information
is located at docs/CONTRIBUTING.md, while .github/PULL_REQUEST_TEMPLATE/pull_request_template.md refers this doc.
This is a follow-up for c006db1798
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6040
This speeds up auto-suggestion for metric names in VMUI and Grafana, which use the following query in this case:
/api/v1/label/__name__/values?match[]={__name__=~"*.some_value.*"}
When the user types `some_value` in the query input field.
- Use exact matching by default for the query arg value provided via arg=value syntax at src_query_args.
Regex matching can be enabled by using =~ instead of = . For example, arg=~regex.
This ensures that the exact matching works as expected without the need to escape special regex chars.
- Add helper functions for creating QueryArg, Header and Regex structs in tests.
This improves maintainability of the tests.
- Remove url.QueryUnescape() call on the url in TestCreateTargetURLSuccess(), since this is bogus approach.
The url.QueryUnescape() must be applied to individual query args, and it mustn't be applied to the whole url,
since in this case it may perform invalid unescaping in the context of the url, or make the resulting url invalid.
While at it, properly marshal all the fields inside UserInfo config to yaml in tests.
Previously Header and QueryArg structs were improperly marshaled because the custom MarshalYAML
is called only on pointers to Header and QueryArg structs. This improves test coverage.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6070
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6115
If one out of 5 vmstorage nodes is unavailable, then the remaining 4 vmstorage nodes will recieve 1/5=20% increase of workload, not 5%.
If one out of 10 vmstorage nodes is unavailable, then the remaining 9 vmstorage nodes will receive 1/10=10% increase of workload, not 1%.
This is a follow-up for 458338afa5
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6099
* app/vmauth: do not increment backend_errors when hitting concurrency limit
Previously, both "vmauth_concurrent_requests_limit_reached_total" and "vmauth_user_request_backend_errors_total" were incremented.
This was based on the assumption that if concurrency limit is hit the backend must be failing to handle the request thus meaning an error.
This assumption does not work in case the endpoint can be overloaded by the misbehaving client sending too many requests within the timeframe.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5565
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* docs/cluster: update cluster resizing info
- add example of resources distribution
- add info about how to handle uneven disk usage after adding a new storage node
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Automatically reload changed TLS root CA pointed by -remoteWrite.tlsCAFile command-line flag
- Automatically reload changed TLS root CA configured via oauth2.tsl_config.ca_file option at -promscrape.config
- Document the change as a feature instead of a bug at docs/CHANGELOG.md
- Simplify the code at lib/promauth, which is responsible for reloading changed TLS root CA files.
- Simplify the usage of lib/promauth.Config.NewRoundTripper() - now it accepts the base http.Transport
instead of a callback, which can change the internal http.Transport.
- Reuse the default tls config if lib/promauth.Config doesn't contain tls-specific configs.
This should reduce memory usage a bit when tls isn't used for scraping big number of targets.
- Do not re-read TLS root CA files on every processed request. Re-read them once per second.
This should reduce CPU usage when scraping big number of targets over https.
- Do not store cert.pem and key.pem files in TestTLSConfigWithCertificatesFilesUpdate, since they can be loaded
from byte slices via crypto/tls.X509KeyPair().
- Remove obsolete comparisons of string representations for authConfig and proxyAuthConfig at areEqualScrapeConfigs().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5725
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2171
* app/vmgateway: add an ability to log invalid auth tokens
This is useful for debugging to make it easier for user to find issues in token contents.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6029
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add info about new vmgateway flag
- add changelog entry
- add info about logInvalidAuthTokens flag
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmgateway/filters/auth: improve reject reason visibility
Explicitly return a rejection reason for request when "logInvalidAuthTokens" is enabled.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/{promauth,promscrape}: automatically refresh root CA certificates after changes on disk
Added a custom `http.RoundTripper` implementation which checks for root CA content changes and updates `tls.Config` used by `http.RoundTripper` after detecting CA change.
Client certificate changes are not tracked by this implementation since `tls.Config` already supports passing certificate dynamically by overriding `tls.Config.GetClientCertificate`.
This change implements dynamic reload of root CA only for streaming client used for scraping. Blocking client (`fasthttp.HostClient`) does not support using custom transport so can't use this implementation.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: update NewRoundTripper API
Update API to allow user to update only parameters required for transport.
Add warning log when reloading Root CA failed.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: fix mutex acquire logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: replace RWMutex with regular mutex to simplify the code
- remove additional mutex used for getRootCABytes - require callee to use mutex
- replace RWMutex with regular mutex
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promauth/config: refactor
- hold the mutex lock to avoid round tripper being re-created twice
- move recreation logic into separate func to simplify the code
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Rename -opentelemetry.sanitizeMetrics command-line flag to more clear -opentelemetry.usePrometheusNaming
- Clarify the description of the change at docs/CHANGELOG.md
- Rename promrelabel.SanitizeLabelNameParts to more clear promrelabel.SplitMetricNameToTokens
- Properly split metric names at '_' char in promerlabel.SplitMetricNameToTokens.
- Add tests for various edge cases for Prometheus metric names' normalization
according to the code at b865505850/pkg/translator/prometheus/normalize_name.go
- Extract the code responsible for Prometheus metric names' normalization into a separate file (santize.go)
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6037
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6035
- Make the configuration more clear by accepting the list of ignored labels during sharding
via a dedicated command-line flag - -remoteWrite.shardByURL.ignoreLabels.
This prevents from overloading the meaning of -remoteWrite.shardByURL.labels command-line flag.
- Removed superfluous memory allocation per each processed sample if sharding by remote storage is enabled.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5938
Remove description for -search.maxExportDuration and -search.maxStatusRequestDuration command-line flags
from the 'Resource usage limits' chapter, since these flags are rarely used for limiting resource usage
and they are already documented in the 'List of command-line flags' chapter.
- Fix docs for new functions at app/vmselect/graphite/functions.json
- Properly drain series lists on errors in aggregateSeriesListsGeneric() and aggregateSeriesList()
- Add links to docs for the added functions at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5809
- Allow specifying only a single HTTP header for reading auth tokens via -httpAuthHeader command-line flag.
This is better from security PoV, since this prevents from accidental reading of auth token from undesired
HTTP header. By default the -httpAuthHeader equals to Authorization. When it is overridden, then
auth token isn't read from Authorization header - it is read only from the specified header.
- Document the -httpAuthHeader command-line flag at https://docs.victoriametrics.com/vmauth/#reading-auth-tokens-from-other-http-headers
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6009
* docs/vmanomaly: v1.12.0 & link updates
* add autotuned description to model section
* - update refs of vmanomaly on enterprise and vmalert pages
- add diagrams for model types
- update self-monitoring section
* - fix typos
- remove .index.html from links
This reverts commit cb23685681.
Reason for revert: the "fix" may hide programming bugs related to incorrect creation of folders
before their use. This may complicate detecting and fixing such bugs in the future.
There are the following fixes for the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985 :
- To configure the OS to do not drop data from the system-wide temporary directory (aka /tmp).
- To run VictoriaMetrics with -cacheDataPath command-line flag, which points to the directory,
which cannot be removed automatically by the OS.
The case when the user accidentally deletes the directory with some files created by VictoriaMetrics
shouldn't be considered as expected, so VictoriaMetrics shouldn't try resolving this case automatically.
It is much better from operation and debuggability PoV is to crash with the clear `directory doesn't exist` error
in this case.
The remotewrite.Stop() expects that there are no pending calls to TryPush().
This means that the ingestionRateLimiter.Register() must be unblocked inside TryPush() when calling remotewrite.Stop().
Provide remotewrite.StopIngestionRateLimiter() function for unblocking the rate limiter before calling the remotewrite.Stop().
While at it, move the rate limiter into lib/ratelimiter package, since it has two users.
Also move the description of the feature to the correct place at docs/CHANGELOG.md.
Also cross-reference -remoteWrite.rateLimit and -maxIngestionRate command-line flags.
This is a follow-up for 02bccd1eb9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5900
Custom HTTP headers are set via net/http.Header.Set or net/http.Header.Add functions.
These functions always convert header keys to canonical form. So the change at b577413d3b
isn't visible to users of VictoriaMetrics components.
There is no need in documenting this change at docs/CHANGELOG.md, since it doesn't give any useful information to users.
This is a follow-up for e6dd52b04c
* lib/storage: add ability to use downsampling for the given series filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add information about downsampling filters
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: fix MetricsQL filter
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: treat missing downsampling filter as a bug
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/part_header: verify correctness of downsampling filters when opening partition
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: save only appliable rules in part metadata
Filter and save only rules which are appliable to partition based on MinTimestamp of stored data.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage/downsampling: update log messages for final dedup
Properly specify a reason of re-running deduplication for partition.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/storage: consistently use MaxTimestamp to determine deduplication/downsampling rules
Using MinTimestamp leads to applying downsampling to parts which are only partially covered by downsampling rule.
For example, partition covers range [1000-2000]. At t=2100 and rule offset 500 data with t=2100-500 => 1600 must be downsampled. The range check against MinTimestamp evaluates to true even though partition contains range which must not be downsampled - [1600:2000].
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Follow-up
- Apply the first matching downsampling period if multiple filters match the given time series.
This allows fine-tuning the downsampling config for the specific needs.
- Take into account downsampling filters during search queries.
- Reduce the difference between community and enterprise branches. This should simplify further maintenance of these branches.
- Properly parse series filters with colons inside them.
- Document the feature at docs/CHANGELOG.md.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4960
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* rm recommendation to keep look-behind window empty, as it is not correct
* mention the change of default value for `-search.latencyOffset`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
During shutdown period of vmalert, remotewrite client retrieve all pending time series from buffer queue, compose them into 1 batch and execute remote write.
This final batch may exceed the limit of -remoteWrite.maxBatchSize, and be rejected by the receiver (gateway, vmcluster or others).
This changes ensures that even during shutdown vmalert won't exceed the max batch size limit for remote write
destination.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6025
* vmalert: fix sending alert messages
1. fix `endsAt` field in messages that send to alertmanager, previously rule with small interval could never be triggered;
2. fix behavior of `-rule.resendDelay`, before it could prevent sending firing message when rule state is volatile.
* docs: update changelog notes
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* lib/storage/table: properly wait for force merges to be completed during shutdown
Properly keep track of running background merges and wait for merges completion when closing the table.
Previously, force merge was not in sync with overall storage shutdown which could lead to holding ptw ref.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs: add changelog entry
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
vmselect uses a cache folder in file system for two purposes:
1. Storing rollup cache results on shutdown;
2. Storing temporary search results from vmstorage during query executions.
It could happen that cache folder is deleted accidentally by user, or by OS
during cleanup routines. This would cause vmselect to:
1. panic on /metrics call, because `MustGetFreeSpace` will fail;
2. return query error user, as it won't be able to store temporary search results.
The changes in this commit are the following:
1. Make `MustGetFreeSpace` to try re-creating the cache folder if it is missing;
2. Make vmselect to try re-creating the cache folder if it can't persist tmp search
results.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* [vmagent] added ingestion rate limiting with new flag `-maxIngestionRate`. This flag can be used to limit the number of samples ingested by vmagent per second. If the limit is exceeded, the ingestion rate will be throttled.
* fix changelog
* fix review comment
When `--vm-native-step-interval` is specified, explore phase will be executed
within specified intervals. Discovered metric names will be associated with
time intervals at which they were discovered. This suppose to reduce number
of requests vmctl makes per metric name since it will skip time intervals
when metric name didn't exist.
This should also reduce probability of exceeding complexity limits
for number of selected series in one request during explore phase.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5369
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Convert test result expectations to canonical form.
Starting from b577413d3b specified header keys are forced
into canonical form https://pkg.go.dev/net/http#CanonicalHeaderKey
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It is confusing for cluster users to find that VMUI is available at vmselect as it is only mentioned in the list of URLs. Explicit mention of vmselect URL in docs will make it easier to discover.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
VictoriaMetrics destination is specified via `--vm-*` cmd-line flags
and is used in opentsdb, influx, prometheus, remote-read modes.
updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5426
Signed-off-by: hagen1778 <roman@victoriametrics.com>
If tlsServerName isn't empty, then it is likely the https request is sent to IP instead of hostname.
In this case the request will fail, since Go automatically sets the Host header to the IP instead
of the desired hostname at tlsServerName. So set the Host header to tlsServerName if itsn't empty.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5802
The `match[]` filter is mandatory at /api/v1/series, so it mustn't be dropped here.
There is no sense in dropping `match[]` filter together with `extra_label` and `extra_filters[]`
at /api/v1/labels and /api/v1/label/.../values if -search.ignoreExtraFiltersAtLabelsAPI commnad-line flag is set,
since:
- the `match[]` filter triggers slow path at these APIs;
- the `extra_label` and `extra_filters[]` filters narrow down the number of matched time series,
so they improve performance comparing to the case when only `match[]` filter is left,
while `extra_label` and `extra_filters[]` filters are dropped.
This is a follow-up for 0b7a23a91d
Improved trace display for better visual separation of branches:
* Increased left padding for each element
* Added padding for the last element in the branch
The change also removes misleading `default` value from README for `maxConcurrentInserts`
cmd-line flag.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
For example, if `interval: 1m`, then data flush occurs at the end of every minute,
while `interval: 1h` leads to data flush at the end of every hour.
Add `no_align_flush_to_interval` option, which can be used for disabling the alignment.
- Reduce memory usage by up to 5x when de-duplicating samples across big number of time series.
- Reduce memory usage by up to 5x when aggregating across big number of output time series.
- Add lib/promutils.LabelsCompressor, which is going to be used by other VictoriaMetrics components
for reducing memory usage for marshaled []prompbmarshal.Label.
- Add `dedup_interval` option at aggregation config, which allows setting individual
deduplication intervals per each aggregation.
- Add `keep_metric_names` option at aggregation config, which allows keeping the original
metric names in the output samples.
- Add `unique_samples` output, which counts the number of unique sample values.
- Add `increase_prometheus` and `total_prometheus` outputs, which ignore the first sample
per each newly encountered time series.
- Use 64-bit hashes instead of marshaled labels as map keys when calculating `count_series` output.
This makes obsolete https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5579
- Expose various metrics, which may help debugging stream aggregation:
- vm_streamaggr_dedup_state_size_bytes - the size of data structures responsible for deduplication
- vm_streamaggr_dedup_state_items_count - the number of items in the deduplication data structures
- vm_streamaggr_labels_compressor_size_bytes - the size of labels compressor data structures
- vm_streamaggr_labels_compressor_items_count - the number of entries in the labels compressor
- vm_streamaggr_flush_duration_seconds - a histogram, which shows the duration of stream aggregation flushes
- vm_streamaggr_dedup_flush_duration_seconds - a histogram, which shows the duration of deduplication flushes
- vm_streamaggr_flush_timeouts_total - counter for timed out stream aggregation flushes,
which took longer than the configured interval
- vm_streamaggr_dedup_flush_timeouts_total - counter for timed out deduplication flushes,
which took longer than the configured dedup_interval
- Actualize docs/stream-aggregation.md
The memory usage reduction increases CPU usage during stream aggregation by up to 30%.
This commit is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5850
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5898
* app/{vmagent,vminsert}: adds /v1/metrics suffix for opentelemetry route path
it must fix compatibility with opentemetry-collector [spec](https://opentelemetry.io/docs/specs/otlp/\#otlphttp-request)
this suffix is hard-coded and cannot be changed with collector configuration
* Apply suggestions from code review
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* add recommendation about network bandiwdth between vmctl, source and destination
* use more relevant time series selector in examples - see https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5835
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* metricsql: fix label_join() when `dst_label` is equal to one of the `src_label`
* Update app/vmselect/promql/transform.go
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the ability to read OpenTelemetry data from Amazon Firehose at docs/CHANGELOG.md
- Simplify parsing Firehose data. There is no need in trying to optimize the parsing with fastjson
and byte slice tricks, since OpenTelemetry protocol is really slooow because of over-engineering.
It is better to write clear code for better maintanability in the future.
- Move Firehose parser from /lib/protoparser/firehose to lib/protoparser/opentelemetry/firehose,
since it is used only by opentelemetry parser.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5893
* deployment: create a separate env for VictoriaLogs
The new environment consists of the following components:
* VictoriaLogs
* fluentbit for collecting logs and sending to VictoriaLogs
* VictoriaMetrics for scraping and storing metrics from fluentbit and VictoriaLogs
* Grafana with VictoriaLogs datasource for monitoring
-----------------
The motivation for creating a separate environment is to simplify existing environments
and make it easier to update or modify them in future.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It has been appeared that there are VictoriaMetrics users, who rely on the fact that
VictoriaMetrics components were closing incoming connections to -httpListenAddr every 2 minutes
by default. So let's return back this value by default in order to fix the breaking change
made at d8c1db7953 .
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1961891450 .
This commit returns back limits for these endpoints, which have been removed at 5d66ee88bd ,
since it has been appeared that missing limits result in high CPU usage, while the introduced concurrency limiter
results in failed lightweight requests to these endpoints because of timeout when heavyweight requests are executed.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
* vmui: add a time picker to the "Logs Explorer" page #5673
* Update app/vmui/packages/vmui/src/pages/ExploreLogs/hooks/useFetchLogs.ts
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmselect: adds milliseconds to the csv export response for rfc3339
* milliseconds is a standard prescion for VictoriaMetrics query request responses
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5837
* app/victoria-metrics: adds tests for csv export/import
follow-up after 3541a8d0cf96dd4f8563624c4aab6816615d0756
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* [lib/promutils, lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)
* fixed tests
* fixed test
* Revert "fixed test"
This reverts commit 8a29764806.
* Revert "fixed tests"
This reverts commit 9ce13d1042.
* Revert "[lib/promutils, lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)"
This reverts commit a7a04bd4
* [lib/httputils] fixed floating-point error when parsing time in RFC3339 format (#5801)
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
* support case-insensitive search
* reflect search condition in URL, so link can be sharable
* support filtering on /alerts page
* fix collapseAll/expandAll logic to respect only shown entries
* add changelog
b60dcbe11f
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Consistently return the first `limit` log entries if the total size of found log entries doesn't exceed 1Mb.
See app/vlselect/logsql/sort_writer.go . Previously random log entries could be returned with each request.
- Document the change at docs/VictoriaLogs/CHANGELOG.md
- Document the `limit` query arg at docs/VictoriaLogs/querying/README.md
- Make the change less intrusive.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5674
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5778
* - apply v1.10 changes
- chapter on model types (uni/multivariate and rolling)
* - update self-monitoring labels description
- fix typos
* fix duplicated text and link rendering
* app/vmauth: properly release memory during config reload
previously metrics package hold a refrence for channels for users concurrent requests.
it case of churn at `name` field of users configuration, new metric was created. But previous one wasn't deleted.
It prevented full parsed configuration from being garbace collected.
now all config related metrics are bound to corresponding metrics.Set and unregistered during config reload process.
It also must fix an issue with incorrect values for current concurrent user requests
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4690
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Closing client connections every 2 minutes doesn't help load balancing -
this just leads to "jumpy" connections between multiple backend servers,
e.g. the load isn't spread evenly among backend servers, and instead jumps
between the servers every 2 minutes.
It is still possible periodically closing client connections by specifying non-zero -http.connTimeout command-line flag.
This should help with https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1304#issuecomment-1636997037
This is a follow-up for d387da142e
Sync description after changes in 83e55456e2
Remove extra text in flags description for vmbackupmanager as it breaks layout
when rendered at docs.victoriametrics.com
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This panic could occur when samples with too long label values are ingested into VictoriaMetrics.
This could result in too long fistItem and commonPrefix values at blockHeader (up to 64kb each).
This may inflate the maximum index block size by 4 * maxIndexBlockSize.
* add more details to changelog
* simplify panels description
* remove capacity planning recommendation, as it proves it incompetent
Signed-off-by: hagen1778 <roman@victoriametrics.com>
During background downsampling, rate(vm_deduplicated_samples_total{type="merge"}) could be much bigger than
rate(vm_rows_added_to_storage_total) and it could last quite some time,
which causes negative values of Storage full ETA and confuses users, see playground.
Instead of trying to get more accurate results during downsampling, I think it's ok to ignore
vm_deduplicated_samples_total at all, it's more reasonable to see Storage full ETA increase after downsampling.
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
changes(), increases_over_time() and resets() shouldn't take into account
value changes, which may occur because of precision errors.
The maximum guaranteed precision for raw samples stored in VictoriaMetrics is 12 decimal digits.
So do not count relative changes for values if they are smaller than 1e-12 comparing to the value.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/767
For example, -fooDuration=',10s,' is now supported - it sets three command-line flag values:
- the first and the last one are set to the default value for `-fooDuration`
- the second one is set to 10s
* vmui: fix select closing on click outside (#5728)
* vmui: clear entered text in select after selecting a value (#5727)
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
It should help identifying cases when too much CPU is spent on garbage collection,
and advice users on how this can be addressed.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The easyproto-based marshaler is 2x slower than the previous custom marshaler,
so let's stick with it. This improves the performance for sending data to remote storage at vmagent
and reduces CPU usage to pre-v1.97.0 levels.
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5511
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
* adding support for username_file in basic_auth of scrape config
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
---------
Signed-off-by: Syed Nihal <syed.nihal@nokia.com>
This case is possible after a new brsPool is allocated. The fix is to verify whether len(brsPool) >= len(brs.brs)
before trying to append a new item to brsPool and sharing its contents with brs.brs.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5733
* app/vmselect: set proper timestamp for cached instant responses
The change updates `getSumInstantValues` to prefer timestamp
from the most recent results. Before, timestamp from cached series
was used.
The old behavior had negative impact on recording rules as they
were getting responses with shifted timestamps in past.
Subsequent recording or alerting rules fetching results of these
recording rules could get no result due to staleness interval.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5659
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This limit has little sense for these APIs, since:
- Thses APIs frequently result in scanning of all the time series on the given time range.
For example, if extra_filters={datacenter="some_dc"} .
- Users expect these APIs shouldn't hit the -search.maxUniqueTimeseries limit,
which is intended for limiting resource usage at /api/v1/query and /api/v1/query_range requests.
Also limit the concurrency for /api/v1/labels, /api/v1/label/.../values
and /api/v1/series requests in order to limit the maximum memory usage and CPU usage for these API.
This limit shouldn't affect typical use cases for these APIs:
- Grafana dashboard load when dashboard labels should be loaded
- Auto-suggestion list load when editing the query in Grafana or vmui
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5055
* port un-synced changed from docs/readme to readme
* consistently use `sh` instead of `console` highlight, as it looks like
a more appropriate syntax highlight
* consistently use `sh` instead of `bash`, as it is shorter
* consistently use `yaml` instead of `yml`
See syntax codes here https://gohugo.io/content-management/syntax-highlighting/
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Sending unfinished aggregate states tend to produce unexpected anomalies with lower values than expected.
The old behavior can be restored by specifying `flush_on_shutdown: true` setting in streaming aggregation config
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: fix data race during hot-config reload
During hot-reload, the logic evokes the group update and rules evaluation
interruption simultaneously. Falsely assuming that interruption happens before
the update. However, it could happen that group will be updated first and only
after the rules evaluation will be cancelled. Which will result in permanent
interruption for all rules within the group.
The fix caches the cancel context function into local variable first. And only after
performs the group update. With cached cancel function we can safely call it without
worrying that we cancel the evaluation for already updated group.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "app/vmalert: fix data race during hot-config reload"
This reverts commit a4bb7e8932.
* app/vmalert: fix data race during hot-config reload
During hot-reload, the logic evokes the group update and rules evaluation
interruption simultaneously. Falsely assuming that interruption happens before
the update. However, it could happen that group will be updated first and only
after the rules evaluation will be cancelled. Which will result in permanent
interruption for all rules within the group.
The fix cancels the evaulation context before applying the update, making sure
that the context will be cancelled for old group always.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Maintain a separate worker pool per each part type (in-memory, file, big and small).
Previously a shared pool was used for merging all the part types.
A single merge worker could merge parts with mixed types at once. For example,
it could merge simultaneously an in-memory part plus a big file part.
Such a merge could take hours for big file part. During the duration of this merge
the in-memory part was pinned in memory and couldn't be persisted to disk
under the configured -inmemoryDataFlushInterval .
Another common issue, which could happen when parts with mixed types are merged,
is uncontrolled growth of in-memory parts or small parts when all the merge workers
were busy with merging big files. Such growth could lead to significant performance
degradataion for queries, since every query needs to check ever growing list of parts.
This could also slow down the registration of new time series, since VictoriaMetrics
searches for the internal series_id in the indexdb for every new time series.
The third issue is graceful shutdown duration, which could be very long when a background
merge is running on in-memory parts plus big file parts. This merge couldn't be interrupted,
since it merges in-memory parts.
A separate pool of merge workers per every part type elegantly resolves both issues:
- In-memory parts are merged to file-based parts in a timely manner, since the maximum
size of in-memory parts is limited.
- Long-running merges for big parts do not block merges for in-memory parts and small parts.
- Graceful shutdown duration is now limited by the time needed for flushing in-memory parts to files.
Merging for file parts is instantly canceled on graceful shutdown now.
- Deprecate -smallMergeConcurrency command-line flag, since the new background merge algorithm
should automatically self-tune according to the number of available CPU cores.
- Deprecate -finalMergeDelay command-line flag, since it wasn't working correctly.
It is better to run forced merge when needed - https://docs.victoriametrics.com/#forced-merge
- Tune the number of shards for pending rows and items before the data goes to in-memory parts
and becomes visible for search. This improves the maximum data ingestion rate and the maximum rate
for registration of new time series. This should reduce the duration of data ingestion slowdown
in VictoriaMetrics cluster on e.g. re-routing events, when some of vmstorage nodes become temporarily
unavailable.
- Prevent from possible "sync: WaitGroup misuse" panic on graceful shutdown.
This is a follow-up for fa566c68a6 .
Thanks @misutoth to for the inspiration at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5190
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3790
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3425
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3647
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3641
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/291
* docs: remove raw and endraw tags as they are not needed for the new version of site
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
* revert formating in vmaler
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
---------
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
* app/vmalert: autogenerate `ALERTS_FOR_STATE` time series for alerting rules with `for: 0`
Previously, `ALERTS_FOR_STATE` was generated only for alerts with `for > 0`.
This behavior differs from Prometheus behavior - it generates ALERTS_FOR_STATE
time series for alerting rules with `for: 0` as well. Such time series can
be useful for tracking the moment when alerting rule became active.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5648https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3056
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: support ALERTS_FOR_STATE in `replay` mode
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts cd4f641d32 , since it has been appeared that the disabled compression
for vmstorage->vmselect data increase network bandwidth usage by more than 10x on typical production workloads,
while it decreases CPU usage at vmstorage by up to 10% and improves query latency by up to 10%.
The 10x increase in network usage is too high price for 10% improvements on query latency and vmstorage CPU usage.
This may result in network bandwidth bottlenecks, which can reduce the overall performance and stability
of VictoriaMetrics cluster. That's why return back the vmstorage->vmselect data compression by default.
The vmstorage->vmselect compression can be disabled by passing -rpc.disableCompression command-line flag to vmstorage.
The vmselect->vmselect compression in multi-level cluster setup can be disabled by passing -clusternative.disableCompression command-line flag.
It has been appeared that the registration of new time series slows down linearly
with the number of indexdb parts, since VictoriaMetrics needs to check every indexdb part
when it searches for TSID by newly ingested metric name.
The number of in-memory parts grows when new time series are registered
at high rate. The number of in-memory parts grows faster on systems with big number
of CPU cores, because the mergeset maintains per-CPU buffers with newly added entries
for the indexdb, and every such entry is transformed eventually into a separate in-memory part.
The solution has been suggested in https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212
by @misutoth - to limit the number of in-memory parts with buffered channel.
This solution is implemented in this commit. Additionally, this commit merges per-CPU parts
into a single part before adding it to the list of in-memory parts. This reduces CPU load
when searching for TSID by newly ingested metric name.
The https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5212 recommends setting the limit on the number
of in-memory parts to 100, but my internal testing shows that much lower limit 15 works with the same efficiency
on a system with 16 CPU cores while reducing memory usage for `indexdb/dataBlocks` cache by up to 50%.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5190
* lib/promscrape: respect `0` value for `series_limit` param
Respect `0` value for `series_limit` param in `scrape_config`
even if global limit was set via `-promscrape.seriesLimitPerTarget`.
Previously, `0` value will be ignored in favor of `-promscrape.seriesLimitPerTarget`.
This behavior aligns with possibility to override `series_limit` value via
relabeling with `__series_limit__` label.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update docs/CHANGELOG.md
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously, it was not possible to determine which tenant sends metrics with excessive amount of labels of label values.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmui: fix the logic of closing the popper #5470
* vmui: fix the logic of caching autocomplete results #5472
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix watcher start order for roles endpoints and endpointslice
Previously the groupWatcher could be mistakenly stopped when requests for pod or services resources take too long.
* remove mislead comment
* docs/sd_configs.md: mention -promscrape.kubernetes.attachNodeMetadataAll flag in the description for attach_metadata section
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4640
* wip
* lib/promscrape/kubernetes: prevent from stopping groupWatcher when there are in-flight apiWatcher.mustStart() calls
groupWatcher is stopped if it has zero registered apiWatchers during 14 seconds.
But such a groupWatcher can be still in use if apiWatcher for `role: endpoints` or `role: endpointslice`
is being registered and the discovery of the associated `pod` and/or `service` objects takes longer
than 14 seconds - see the beginning of groupWatcher.startWatchersForRole() function for details.
Track the number of in-flight calls to apiWatcher.mustStart() and prevent from stopping the associated groupWatcher
if the number of in-flight calls is non-zero.
P.S. postponing the discovery of `pod` and/or `service` objects associated with `endpoints` or `endpointslice` roles
isn't the best solution, since it slows down initial discovery of `endpoints` and `endpointslice` targets.
* typo fix
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Examples:
1) -metricsAuthKey=file:///abs/path/to/file - reads flag value from the given absolute filepath
2) -metricsAuthKey=file://./relative/path/to/file - reads flag value from the given relative filepath
3) -metricsAuthKey=http://some-host/some/path?query_arg=abc - reads flag value from the given url
The flag value is automatically updated when the file contents changes.
* app/vmauth: adds metric_labels and backend_errors counter
it must improve observability for user requests with new metric - per user backend errors counter.
it's needed to calculate requests fail rate to the configured backends.
metric_labels configuration allows to perform additional aggregations on top of multiple users from configuration section.
It could be multiple clients or clients with separate read/write tokens
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5565
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmselect/promql: properly handle possible negative results caused by float operations precision error in rollup functions like rate() or increase()
* fix test
- docs/sd_configs.md: moved hetzner_sd_configs docs to the correct place according to alphabetical order of SD names,
document missing __meta_hetzner_role label.
- lib/promscrape/config.go: added missing MustStop() call for Hetzner SD,
and moved the code to the correct place according to alphabetical order of SD names.
- lib/promscrape/discovery/hetzner: properly handle pagination for hloud API responses,
populate missing __meta_hetzner_role label like Prometheus does.
- Properly populate __meta_hetzner_public_ipv6_network label like Prometheus does.
- Remove unused SDConfig.Token.
- Remove "omitempty" annotation from SDConfig.Role field, since this field is mandatory.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5550
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3154
Each Grafana dashboard has unique ID which can be used to fetch the dashboard
from grafana.com: https://grafana.com/grafana/dashboards/11176
The same dashboard can be accessed via URL with slug: https://grafana.com/grafana/dashboards/11176-victoriametrics-cluster/
But using slug implies that any change to dashboard name will break the link.
So it is better to just use ID, so the dashboard URL will never break.
This is follow-up for ff33e60a3d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It is likely this value was borrowed from panel `Slow inserts` panel
from Grafana dasbhoard for VM single/cluster installations. This is a mistake.
There is no such thing as "tolerable churn rate", as tolerancy depends on the amount
of allocated resources.
Although, it is unclear what is meant by 5%. If it refers to 5% of new time series per second,
then such churn rate is extremely high. It would mean that the avg life of a time series is 20s.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Properly determine time range search for instant queries with too big look-behind window like `foo[100y]`.
Previously, such queries could return empty responses even if `foo` is present in database.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5553
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- Clarify the bugfix description at docs/CHANGELOG.md
- Simplify the code by accessing prefetchedMetricIDs struct under the lock
instead of using lockless access to immutable struct.
This shouldn't worsen code scalability too much on busy systems with many CPU cores,
since the code executed under the lock is quite small and fast.
This allows removing cloning of prefetchedMetricIDs struct every time
new metric names are pre-fetched. This should reduce load on Go GC,
since the cloning of uin64set.Set struct allocates many new objects.
Add docs to explain that `latest` backup folder can be accessed
more frequently than others. Hence, it is recommended to keep it
on storages with low access price.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Before, this cache was limited only by size.
Cache invalidation by time happens with jitter to prevent thundering herd problem.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It was calculating the number of dropped time series instead of the number of dropped samples.
While at it, drop vmalert_remotewrite_dropped_bytes_total metric, since it was inconsistently calculated -
at one place it was calculating raw protobuf-encoded sample sizes, while at another place it was calculating
the size of snappy-compressed prompbmarshal.WriteRequest protobuf message.
Additionally, this metric has zero practical sense, so just drop it in order to reduce the level of confusion.
* update link to book a demo for AD & RCA
* fix invalid refs in components/model
* - fix staging -> prod links
- replace capitalized FAQ headers
- change the section order on main page
- replace :latest tag with current stable
* add panels for detailed visualization of traffic usage between vmstorage, vminsert, vmselect
components and their clients. New panels are available in the rows dedicated to specific components.
* update "Slow Queries" panel to show percentage of the slow queries to the total number of read queries
served by vmselect. The percentage value should make it more clear for users whether there is a service degradation.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
automatically add `exported_` prefix for original evaluation result label if it's conflicted with external or reserved one,
previously it was overridden.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5161
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The user may which to control the endpoint parameters for instance to
set the audience when requesting an access token. Exposing the
parameters as a map allows for additional use cases without requiring
modification.
* lib/awsapi: properly assume role with webIdentity token
introduce new irsaRoleArn param for config. It's only needed for authorization with webIdentity token.
First credentials obtained with irsa role and the next sts assume call for an actual roleArn made with those credentials.
Common use case for it - cross AWS accounts authorization
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3822
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Some clients may ingest samples via OpenTelemetry protocol without Resource labels.
Previously VictoriaMetrics was silently dropping such samples.
The commit 317834f876 added vm_protoparser_rows_dropped_total{type="opentelemetry",reason="resource_not_set"}
counter for tracking of such dropped samples. See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5459
It is better from usability PoV to accept such samples instead of dropping them and incrementing the corresponding counter.