* app/vminsert: fixes readonly check
previously vminsert doesn't check readOnly state for vmstorage, since check was never performed for nil buffer
In this case every 30 second storage node loss readonly state and received some data.
It caused re-routing and possible slow down for ingestion
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4870
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
app/vmselect: fix panic when using `/select/multitenant` endpoint
Such requests must be rejected as not found since vmselect does not support multitenant endpoint.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4910
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* deployment/docker: disable provenance in buildx
it must fix an issue with multi-platform manifest generation
at buildx >= 0.10 backward compatibility was broken and generated image cannot be used with docker systems that doesn't support oci.
disabling attestat temporary fixes it.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4907https://docs.docker.com/build/attestations/slsa-provenance/
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Set the default value for -vmstorageUserTimeout to 3 seconds. This is much better
than the 0 value, which means that TCP connection to unreachable vmstorage could block
for up to 16 minutes.
- Document -vmstorageUserTimeout at docs/Cluster-VictoriaMetrics.md
Initially, stream parse mode was reading data from response and parsing it on flight. This was causing longer delay to read the whole response and required increasing timeout value to allow data processing while reading. So that 908e35affd increased timeout value to fix this.
But after 74c00a8762 response in stream parse mode is saved into memory and then parsed eliminating necessity of having timeout value higher that for usual scrape.
Updates: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4847
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Retry failed write request on the closed connection immediately,
without waiting for backoff. This should improve data delivery speed
and reduce amount of error logs emitted by vmagent when using idle connections.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4139
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: retry failed write request on the closed connection
Re-instantinate request before retry as body could have been already spoiled.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: correctly re-instantinate HTTP req on retries
Previosly, request retry to datasource re-used existing HTTP request.
But if request object was already partially processed (body was read),
then retry will be unsuccessful.
The change re-instantinates HTTP request object before retry.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: review fix
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Add button to prettify query
Just capitalizes query text for now
* Add /prettify-query API handler
* Replace UI pretiffier using prettifier API
* Add showing server errors
Had to pass setQueryErrors from useFetchQuery.ts
* Use serverUrl from global AppState
* Change icon to AutoAwsome icon + added style change color when button is active
* Add sync/await to prettifyQuery function
* Doc public function for lint
* Minor async fix
* Removed extra blank lines
* Extract usePrettifyQuery hook
* Made more generic style for :active button
* Refactor usePrettifyQuery
However, prettify errors don't clean up query errors, but should
* Add prettyQuery functionality to CHANGELOG.md
* Reuse queryErrors
* Unhide errors on start
---------
Co-authored-by: Tamara <toma.vashchuk@gmail.com>
app/vmctl: don't interrupt migration process if tenant has no data
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Alexander Marshalov <_@marshalov.org>
vmagent: properly add extra labels before sending data to remote storage
labels from `remoteWrite.label` are now added to sent metrics just before they
are pushed to `remoteWrite.url` after all relabelings, including stream aggregation relabelings (#4247)
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4247
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Fix display of ingested rows rate for `Samples ingested/s`
and `Samples rate` panels for vmagent's dasbhoard.
Previously, not all ingested protocols were accounted in these panels.
An extra panel `Rows rate` was added to `Ingestion` section to display the split
for rows ingested rate by protocol.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Opentelemetry format allows histograms with non-counter buckets. In this case it makes no sense to add buckets into database
and save only counter with _count suffix.
It could be used as gauge.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4814
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promrelabel: fix relabeling if clause being applied to labels outside of current context
Relabeling is applied to each metric row separately, but in order to lower amount of memory allocations it is reusing labels.
Functions which are working on current metric row labels are supposed to use only current metric labels by using provided offset, but if clause matcher was using the whole labels set instead of local metrics.
This leaded to invalid relabeling results such as one described here: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/CHANGELOG.md: document the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1998
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4806
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This reverts commit 252643d100.
Reason for revert: the commit incorrectly fixes the the issue.
The `remoteAddr` must be properly quoted inside lib/httpserver.GetQuotedRemoteAddr().
It isn't quoted properly if the request contains X-Forwarded-For header.
The proper fix will be included in the follow-up commit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4676
{vmagent/remotewrite,vminsert/common}: fix dropInput and keepInput flags inconsistency
Sync behavior for dropInput and keepInput flags between single-node and vmagent.
Fix vmagent not respecting dropInput flag and reverse logic for keepInput.
* rename `configErr` to `lastConfigErr` to reduce confusion
* add tests to verify metrics and msg are set properly
* fix mistake when config success metric wasn't restored after an error
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Correctly calculate `Bytes per point` value for single-server and cluster VM dashboards.
Before, the calculation mistakenly accounted for the number of entries in indexdb in
denominator, which could have shown lower values than expected.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The `ConcurrentFlushesHitTheLimit` could be related to components like
vminsert, vmstorage, vm-single-node and vmagent. Moving this alert
to the `health` section of alerts will be benefitial for all components
and will remove the duplicates from single/cluster alerts.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The new panel supposed to show whether the number of concurrent
inserts processed by vmagent isn't reaching the limit.
The panel contains recommendation what to do if limit is reached.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Binary export API protocol can be disabled via `-vm-native-disable-binary-protocol` cmd-line flag when migrating data from VictoriaMetrics. Disabling binary protocol
can be useful for deduplication of the exported data before ingestion.
For this, deduplication need to be configured at `-vm-native-src-addr` side
and `-vm-native-disable-binary-protocol` should be set on vmctl side.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Links of form `/api/v1/<groupID>/<alertID>/status` were deprecated
in favour of `/api/v1/alerts?group_id=<>&alert_id=<>` links in
v1.79.0. See more details here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2825
This change removes code responsible for deprecated functionality.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Adding anchors to the 1.92 changelog breaks consistency
of navigation section at https://docs.victoriametrics.com/CHANGELOG.html
All other releases do not have subsections, so should 1.92.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: unittest support stale datapoint (#4696)"
This reverts commit 0b44df7ec8.
* Revert "docs: specify min version and limitations for vmalert's unit tests"
This reverts commit a24541bd
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Revert "vmalert: init unit test (#4596)"
This reverts commit da60a68d
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: mention unittest revert in changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/protoparser: adds opentelemetry parser
app/{vmagent,vminsert}: adds opentelemetry ingestion path
Adds ability to ingest data with opentelemetry protocol
protobuf and json encoding is supported
data converted into prometheus protobuf timeseries
each data type has own converter and it may produce multiple timeseries
from single datapoint (for summary and histogram).
only cumulative aggregationFamily is supported for sum(prometheus
counter) and histogram.
Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
updates deps
fixes tests
wip
wip
wip
wip
lib/protoparser/opentelemetry: moves to vtprotobuf generator
go mod vendor
lib/protoparse/opentelemetry: reduce memory allocations
* wip
- Remove support for JSON parsing, since it is too fragile and is rarely used in practice.
The most clients send OpenTelemetry metrics in protobuf.
The JSON parser can be added in the future if needed.
- Remove unused code from lib/protoparser/opentelemetry/pb and lib/protoparser/opentelemetry/proto
- Do not re-use protobuf message between ParseStream() calls, since there is high chance
of high fragmentation of the re-used message because of too complex nested structure of the message.
* wip
* wip
* wip
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Add -remoteWrite.shardByURL command-line flag, which instructs vmagent to spread evenly
outgoing time series data among the configured remote storage systems specified via -remoteWrite.url .
Samples for the same time series go to the same -remoteWrite.url . This allows building horizontally
scalable stream aggregation when samples for counter and histogram series must be aggregated
by the same second-level vmagent instance.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4637
- Use a byte slice instead of a map for tracking indexes for matching series.
This improves performance, since access by slice index is faster than access by map key.
- Re-use the byte slice for tracking indexes for matching series.
This removes unnecessary memory allocations and improves stream aggregation performance a bit.
- Add an ability to return to the previous behvaiour by specifying -remoteWrite.streamAggr.dropInput command-line flag.
In this case all the input samples are dropped when stream aggregation is enabled.
- Backport the new stream aggregation behaviour from vmagent to single-node VictoriaMetrics when -streamAggr.config
option is set.
- Improve docs regarding this change at docs/CHANGELOG.md
- Document the new behavior at docs/stream-aggregation.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4575
* {lib/streamaggr,vmagent/remotewrite}: breaking change for keepInput flag
Changes default behaviour of keepInput flag to write series which did not match any aggregators to the remote write.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4243
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update app/vmagent/remotewrite/remotewrite.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: pre-create timeseries before indexDB rotation
during an hour before indexDB rotation start creating records at the next indexDB
it must improve performance during switch for the next indexDB and remove ingestion issues.
Since there is no need for creation new index records for timeseries already ingested into current indexDB
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
* lib/storage: further work on indexdb rotation optimization
- Document the change at docs/CHAGNELOG.md
- Move back various caches from indexDB to Storage. This makes the change less intrusive.
The dateMetricIDCache now takes into account indexDB generation, so it stores (date, metricID)
entries for both the current and the next indexDB.
- Consolidate the code responsible for idbNext pre-filling into prefillNextIndexDB() function.
This improves code readability and maintainability a bit.
- Rewrite and simplify the code responsible for calculating the next retention timestamp.
Add various tests for corner cases of this code.
- Remove indexdb pre-filling from RegisterMetricNames() function, since this function is rarely called.
It is OK to add indexdb entries on demand in this function. This simplifies the code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
* docs/CHANGELOG.md: refer to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4563
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* app/vmalert/datasource/graphite: allow overriding "from" parameter for datasource queries
Fixes construction of URL parameters for graphite render to allow overriding "from" parameter.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4685
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmalert/datasource/graphite: update flow for building URL parameters
Makes flow of building URL parameters same as Prometheus datasource has:
1) Setting all default values
2) Merging those values with provided `extraParams`
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Improve docs
- Hide `debug relabeling` column when -promscrape.dropOriginalLabels command-line flag is set
- Inline the code from the added template functions, since the code is harder to follow
with the template functions, especially when these functions have misleading names.
Also, these functions are used only in one place, e.g. they do not reduce the amounts of code.
- Hide `click to show original labels` title at `labels` column when original labels aren't available.
- Show the reason on whey original labels aren't available at /service-discovery page.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4597
* app/vmagent: fix creating target id if `--promscrape.dropOriginalLabels` flag was used
* app/vmagent: hide links if OriginalLabels was dropped
* app/vmagent: update CHANGELOG.md and added information to the docs
* app/vmagent: fix comments
* feat: add page to display a list of active queries (#4598)
* app/vmagent: code formatting
* fix: remove console
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
The `a op b keep_metric_names` is ambigouos to `a op (b keep_metric_names)` when `b` is a transform or rollup function.
For example, `a + rate(b) keep_metric_names`. So it is better to use more clear syntax: `(a op b) keep_metric_names`
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3710
* metricsql: add support of using keep_metric_names for binary operations
This should help to avoid confusion with queries like one in the issue #3710.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* wip
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously all the newly ingested time series were registered in global `MetricName -> TSID` index.
This index was used during data ingestion for locating the TSID (internal series id)
for the given canonical metric name (the canonical metric name consists of metric name plus all its labels sorted by label names).
The `MetricName -> TSID` index is stored on disk in order to make sure that the data
isn't lost on VictoriaMetrics restart or unclean shutdown.
The lookup in this index is relatively slow, since VictoriaMetrics needs to read the corresponding
data block from disk, unpack it, put the unpacked block into `indexdb/dataBlocks` cache,
and then search for the given `MetricName -> TSID` entry there. So VictoriaMetrics
uses in-memory cache for speeding up the lookup for active time series.
This cache is named `storage/tsid`. If this cache capacity is enough for all the currently ingested
active time series, then VictoriaMetrics works fast, since it doesn't need to read the data from disk.
VictoriaMetrics starts reading data from `MetricName -> TSID` on-disk index in the following cases:
- If `storage/tsid` cache capacity isn't enough for active time series.
Then just increase available memory for VictoriaMetrics or reduce the number of active time series
ingested into VictoriaMetrics.
- If new time series is ingested into VictoriaMetrics. In this case it cannot find
the needed entry in the `storage/tsid` cache, so it needs to consult on-disk `MetricName -> TSID` index,
since it doesn't know that the index has no the corresponding entry too.
This is a typical event under high churn rate, when old time series are constantly substituted
with new time series.
Reading the data from `MetricName -> TSID` index is slow, so inserts, which lead to reading this index,
are counted as slow inserts, and they can be monitored via `vm_slow_row_inserts_total` metric exposed by VictoriaMetrics.
Prior to this commit the `MetricName -> TSID` index was global, e.g. it contained entries sorted by `MetricName`
for all the time series ever ingested into VictoriaMetrics during the configured -retentionPeriod.
This index can become very large under high churn rate and long retention. VictoriaMetrics
caches data from this index in `indexdb/dataBlocks` in-memory cache for speeding up index lookups.
The `indexdb/dataBlocks` cache may occupy significant share of available memory for storing
recently accessed blocks at `MetricName -> TSID` index when searching for newly ingested time series.
This commit switches from global `MetricName -> TSID` index to per-day index. This allows significantly
reducing the amounts of data, which needs to be cached in `indexdb/dataBlocks`, since now VictoriaMetrics
consults only the index for the current day when new time series is ingested into it.
The downside of this change is increased indexdb size on disk for workloads without high churn rate,
e.g. with static time series, which do no change over time, since now VictoriaMetrics needs to store
identical `MetricName -> TSID` entries for static time series for every day.
This change removes an optimization for reducing CPU and disk IO spikes at indexdb rotation,
since it didn't work correctly - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 .
At the same time the change fixes the issue, which could result in lost access to time series,
which stop receving new samples during the first hour after indexdb rotation - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
The issue with the increased CPU and disk IO usage during indexdb rotation will be addressed
in a separate commit according to https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401#issuecomment-1553488685
This is a follow-up for 1f28b46ae9
* app/vmctl: fix panic `--remote-read-filter-time-start` flag not defined
* app/vmctl: update CHANGELOG.md
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
It could happen for low evaluation intervals and irregular
delays during execution that evaluation time would get
a negative offset. This could result into cumulative
discrepancy between the actual time and evaluation time for rules.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmselect: introduce `search.skipSlowReplicas` cmd-line flag
vmselect has two logical conditions during request processing when
`-replicationFactor` cmd-line flag is set:
1. If at least `len(storageNodes) - replicationFactor` responded, it could skip
waiting for the rest of nodes to respond. This could lead to problems described
here https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207.
2. Mark response as partial if less than `len(storageNodes) - replicationFactor` responded
without an error.
The P1 showed itself error-prone and became the main reason why
`-replicationFactor` wasn't recommended to use at vmselect level.
However, this optimization could be still very useful in situations
when there are slow and fast replicas in cluster.
But P2 remains viable and important conditionless.
Hiding P1 behind the feature-flag `search.skipSlowReplicas`
should make `-replicationFactor` flag usable again. And let users
choose whether they want P1 to be respected.
Related issues
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1207https://github.com/VictoriaMetrics/VictoriaMetrics/issues/711
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* docs: update changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
vmalert: allow disabling of `step` param attached to instant queries
This might be useful for using vmalert with datasources that to not support this param,
unlike VictoriaMetrics.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4573
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix removing storage data dir before restoring from backup
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comment
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fixes after merge with `enterprise-single-node` branch
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
- Clarify the scope of the fix at docs/CHANGELOG.md
- Handle the case when -search.maxSamplesPerSeries limit is exceeded
in the same way as the -search.maxSamplesPerQuery limit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4472
The validation was needed for covering corner cases when storage is tested with data from 1970.
This resulted into unexpected search results, as year was parsed incorrectly from the given timestamp.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
The change focuses on rectifying inconsistencies in the navigation behavior of the application
and eliminating issues encountered when manually altering the URL.
The key updates include:
- Refactoring of the routing mechanism to handle all possible routes and their states.
- Enhancement of the React Router usage to ensure a smoother navigation experience.
- Handling application state when the URL is manually changed.
expose `vmauth_user_request_duration_seconds`
and `vmauth_unauthorized_user_request_duration_seconds` summary metrics
for measuring requests latency per user.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
By default, vmalert will make multiple retry attempts with exponential delay.
The total time spent during retry attempts shouldn't exceed `-remoteWrite.retryMaxTime` (default is 30s).
When retry time is exceeded vmalert drops the data dedicated for `-remoteWrite.url`.
Before, vmalert dropped data after 5 retry attempts with 1s delay between attempts (not configurable).
See `-remoteWrite.retryMinInterval` and `-remoteWrite.retryMaxTime` cmd-line flags.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
vmalert: retry all errors except 4XX status codes
Retry all errors except 4XX status codes while pushing via remote-write
to the remote storage. Previously, errors like broken connection could
prevent vmalert from retrying the request.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix: optimize the preparation of data for the graph
* fix: optimize tooltip rendering
* fix: optimize re-rendering of the chart
* vmui: memory leak fix
* lib/storage: creates parts.json on start-up if it not exists.
It fixes migrations from versions below v1.90.0.
Previously parts.json was created only after successful merge.
But if merge was interruped for some reason (OOM or shutdown), parts.json wasn't created and partitions left after interruped merge weren't properly deleted.
Since VM cannot check if it must be removed or not.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4336
* Apply suggestions from code review
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/storage/partition.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
app/vmagent/remotewrite: fix vmagent panic on shutdown
Currently, when vmagent is stopping it first flushes pending series in remote write context and proceeds to stop streaming aggregation. This leads to streaming aggregation being unable to write results into pending timeseries (since it is already nil) and panic.
This can lead to losing some aggregation results being lost almost silently.
The fix is reordering flow to first stop streaming aggregation and flush all pending time series after that.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmctl: add verbose output for docker installations or when TTY isn't available
* app/vmctl: fix tests
* app/vmctl: make vmctl interactive if no tty
* app/vmctl: cleanup
* app/vmctl: add comment
---------
Co-authored-by: Nikolay <nik@victoriametrics.com>
* vmalert: fix nil map assignment
The storage instance with nil map params was created for remote-read purposes.
And before change 7a9ae9de0d this map was ignored in ApplyParams.
Now, it started to be used and vmalert panics in runtime.
The fix properly inits map for at `NewVMStorage` and verifies it is not nil
on assignment in `ApplyParams`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: add to changelog
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly clone Storage params
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This reverts the following commits:
- e0e16a2d36
- 2ce02a7fe6
The reason for revert: the updated logic breaks assumptions made
when fixing https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698 .
For example, if a time series stop receiving new samples during the first
day after the indexdb rotation, there are chances that the time series
won't be registered in the new indexdb. This is OK until the next indexdb
rotation, since the time series is registered in the previous indexdb,
so it can be found during queries. But the time series will become invisible
for search after the next indexdb rotation, while its data is still there.
There is also incompletely solved issue with the increased CPU and disk IO resource
usage just after the indexdb rotation. There was an attempt to fix it, but it didn't fix
it in full, while introducing the issue mentioned above. See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401
TODO: to find out the solution, which simultaneously solves the following issues:
- increased memory usage for setups high churn rate and long retention (e.g. what the reverted commit does)
- increased CPU and disk IO usage during indexdb rotation ( https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1401 )
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2698
Possible solution - to create the new indexdb in one hour before the indexdb rotation
and to gradually pre-populate it with the needed index data during the last hour before indexdb rotation.
Then the new indexdb will contain all the needed data just after the rotation,
so it won't trigger increased CPU and disk IO.
- Document the change at docs/CHANGELOG.md
- Clarify comments for non-trivial code touched by the commit
- Improve the logic behind maybeCreateIndexes():
- Correctly create per-day indexes if the indexdb rotation is performed during
the first hour or the last hour of the day by UTC.
Previously there was a possibility of missing index entries on that day.
- Increase the duration for creating new indexes in the current indexdb for up to 22 hours
after indexdb rotation. This should reduce the increased resource usage
after indexdb rotation.
It is safe to postpone index creation for the current day until the last hour
of the current day after indexdb rotation by UTC, since the corresponding (date, ...)
entries exist in the previous indexdb.
- Search for TSID by (date, MetricName) in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
- Search for (date, metricID) entries in both the current and the previous indexdb.
Previously the search was performed only in the current indexdb. This could lead
to excess creation of per-day indexes for the current day just after indexdb rotation.
* added backup locking/unlocking against retention policy to vmbackupmanager
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* added docs for new commands
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* fix review comments
Signed-off-by: Alexander Marshalov <_@marshalov.org>
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* feat: improvement of the top queries page
* vmui/docs: enhancements to top queries page
* Apply suggestions from code review
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmui: change default font size to 14px for better readability
vmui: fix bug with missing text on buttons in safari
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* app/vmui: added Labels with the highest number of unique values
* app/vmui: cleanup
* app/vmui: cleanup
* app/vmui: add table description
* app/vmui: fix comment, updated CHANGELOG.md
* app/vmui: disable links
* app/vmui: added actions to the table, it will show values for selected label with the highest number of series
* app/vmui: fix comment
* vmalert: expand rule groups on anchor click
before, anchor click was only updating the URL.
To expand the group, user had to click on rule's block.
Now, group will toggle automatically.
* vmalert: allow filtering group in web UI
The new filter allows to filter groups and rules within
groups by: errors only or noMatch only.
The filtering supposed to help navigating big numbers of groups/rules.
Filtering is reflected in URL, so can be shared as a link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Without reset, labels duplicates could have been added during stream aggregation.
Since `ctx.Labels` is reused during processing of many series, each series will
add its labels to the context. Even if the same labels were already addeded on prev
iteration. Now, we reset `ctx.Labels` on each iteration to contain so labels from
different series didn't interfere.
This could have cause exceeding of the limit on number of labels per pushed time series.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4277
Signed-off-by: hagen1778 <roman@victoriametrics.com>
app/vmalert: detect alerting rules which don't match any series at all
vmalert starts to understand /query responses which contain object:
```
"stats":{"seriesFetched": "42"}
```
If object is present, vmalert parses it and populates a new field
`SeriesFetched`. This field is then used to populate the new metric
`vmalert_alerting_rules_last_evaluation_series_fetched` and to
display warnings in the vmalert's UI.
If response doesn't contain the new object (Prometheus or
VictoriaMetrics earlier than v1.90), then `SeriesFetched=nil`.
In this case, UI will contain no additional warnings.
And `vmalert_alerting_rules_last_evaluation_series_fetched` will
be set to `-1`. Negative value of the metric will help to compile
correct alerting rule in follow-up.
Thanks for the initial implementation to @Haleygo
See https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4056
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4039
Signed-off-by: hagen1778 <roman@victoriametrics.com>
It appears that 90% usage for anonymous mem usage
is already concerning. So we lowering the threshold to 80%.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
When using `retentionTimezoneOffset` and having local timezone being more than 4 hours different from UTC indexdb retention calculation could return negative value. This caused indexdb rotation to get in loop.
Fix calculation of offset to use `retentionTimezoneOffset` value properly and add test to cover all legit timezone configs.
See:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4207
- https://github.com/VictoriaMetrics/VictoriaMetrics/pull/4206
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Windows doesn't allow to remove dir with opened files. Usually it's a case for snapshots, hard cannot be removed if file is openned.
With this change, dir will be renamed and properly deleted at the next process start.
It's recommended to restart vmstorage/vmsingle for snapshots deletion completion periodically.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* lib/promscrape/discovery/kubernetes: add common labels to all ports discovered from endpoints
Sets
`__meta_kubernetes_endpoints_name` and `__meta_kubernetes_namespace` labels to all ports of pod.
Prometheus sets those labels to all ports in pod (0ab9553611/discovery/kubernetes/endpoints.go (L267C15-L269)) even if port is not matching any service.
See: #4154
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape/discovery/kubernetes: fix test for updated discovery logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Properly return empty slices instead of nil for `/api/v1/rules` and `/api/v1/alerts` API handlers.
This improves compatibility with Grafana.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4221
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Supports using `**` for `-rule` and `-rule.templates`: `dir/**/*.tpl` loads contents of dir and all subdirectories recursively.
See: #4041
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Artem Navoiev <tenmozes@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
* lib/promscrape: adds filter for consul_sd_configs:
it allows advanced filtering for consul service discovery requests
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4183
* typo fix
* removes deprecation mentions since it's not relevant
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Templating of `-external.alert.source` is not expected to have access to the query which was causing runtime error when query function was passed as nil.
See: #4181
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* feat: display heatmap in the explore metrics (#4111)
* fix: correct calc step for heatmap
* fix: remove spaces in the result of getDurationFromMilliseconds
* feat: add button "show today" to date picker
* feat: add comparison with the prev day (#3967)
* vmui/docs: add comparison of data to cardinality page
* feat: add WithTemplate page
* app/vmselect/prometheus: enable json mode for expand with expr API
* app/vmselect/prometheus: enable CORS and add content type
* feat: add api for expand with templates
* fix: remove console from useExpandWithExprs
* app/vmselect/prometheus: fix escaping
* vmui: integrate WITH template
* app/vmctl: check content type instead of form param
* fix: add content-type for fetch with-exprs
* fix: add a header to the server's response that allows the "Content-Type" header
* app/vmctl: added comment and cleanup
* app/vmctl: use format query param
---------
Co-authored-by: dmitryk-dk <kozlovdmitriyy@gmail.com>
* app/vmctl: add support for the different time format in the native binary protocol
* app/vmctl: update flag description, update CHANGELOG.md
* app/vmctl: add comment to exported function
* lib/httpserver: introduce `-http.maxConcurrentRequests` command-line flag
Introduce `-http.maxConcurrentRequests` command-line flag to protect
VM components from resource exhaustion during unexpected spikes of HTTP requests.
By default, the new flag's value is set to 0 which means no limits are applied.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/httpserver: mention http.maxConcurrentRequests in docs
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: retry datasource requests with EOF or unexpected EOF errors
Retry failed read request on the closed connection one more time.
This may improve rules execution reliability when connection
between vmalert and datasource closes unexpectedly.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: fix old tests
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This handler will instruct search engines that indexing is not allowed for the content exposed to the internet. This should help to address issues like #4128 when instances are exposed to the internet without authentication.
Improperly configured -bigMergeConcurrency command-line flag usually leads to uncontrolled
growth of unmerged parts, which, in turn, increases CPU usage and query durations.
So it is better deprecating this flag. In rare cases -smallMergeConcurrency command-line flag
can be used instead for controlling the concurrency of background merges.
This makes it easier to understand exact point in time which is included in this backup.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape: fix the problem with scrape work duplicates when file_sd_config can't be read
* lib/promscrape: clarified comment
* lib/promscrape: made better approach to handle a problem with growing []*ScrapeWork on each error when loading config
* lib/promscrape: added CHANGELOG.md
* Update docs/CHANGELOG.md
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* feat: add tips for working with the graph and legend
* feat: add the ability to collapse the legend
* vmui/docs: add the ability to collapse the legend
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/storage: check for free disk space before opening tables
We check for free disk space before call to `openTable`,
so `Storage` can be set to ReadOnly before mergeWorkers start.
Before the change, there was a chance that merges will start
even if Storage has to start in ReadOnly mode because of
`-storage.minFreeDiskSpaceBytes` limit.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4023
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/storage: chore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Update lib/storage/storage.go
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Make sure that the last successfully loaded config is used on hot-reload failure
- Properly cleanup resources occupied by already initialized aggregators
when the current aggregator fails to be initialized
- Expose distinct vmagent_streamaggr_config_reload* metrics per each -remoteWrite.streamAggr.config
This should simplify monitoring and debugging failed reloads
- Remove race condition at app/vminsert/common.MustStopStreamAggr when calling sa.MustStop() while sa
could be in use at realoadSaConfig()
- Remove lib/streamaggr.aggregator.hasState global variable, since it may negatively impact scalability
on system with big number of CPU cores at hasState.Store(true) call inside aggregator.Push().
- Remove fine-grained aggregator reload - reload all the aggregators on config change instead.
This simplifies the code a bit. The fine-grained aggregator reload may be returned back
if there will be demand from real users for it.
- Check -relabelConfig and -streamAggr.config files when single-node VictoriaMetrics runs with -dryRun flag
- Return back accidentally removed changelog for v1.87.4 at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3639
Verifying status code helps to avoid misleading errors caused by attempt to parse unsuccessful response.
Related issue: #4034
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
- Compare directory names instead of paths to directory when determining which persistent queues must be deleted
This is less error-prone solution, since paths to the same directory can differ, which could lead
to accidental directory removal for the existing -remoteWrite.url
- Log the `removed %d dangling queues` message when at least a single queue has been removed
- Consistently use filepath.Join() for creating paths to persistent queues.
This is needed for Windows support (see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70 )
- Clarify the description of the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4014
- Allocate and initialize seriesByWorkerID slice in a single go instead
of initializing every item in the list separately.
This should reduce CPU usage a bit.
- Properly set anti-false sharing padding at timeseriesWithPadding structure
- Document the change at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3966
* allowed using dashes and dots in environment variables names for templating config files with envtemplate (#3999)
Signed-off-by: Alexander Marshalov <_@marshalov.org>
* Apply suggestions from code review
---------
Signed-off-by: Alexander Marshalov <_@marshalov.org>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/netutil: log only parsing errors for proxy-protocol
Previosly every error was logged. With configured TCP health checks at load-balancer or kubernetes, vmauth spams a lot of false positive error message into logs
* Update docs/CHANGELOG.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update lib/netutil/tcplistener.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
This commit changes background merge algorithm, so it becomes compatible with Windows file semantics.
The previous algorithm for background merge:
1. Merge source parts into a destination part inside tmp directory.
2. Create a file in txn directory with instructions on how to atomically
swap source parts with the destination part.
3. Perform instructions from the file.
4. Delete the file with instructions.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since the remaining files with instructions is replayed on the next restart,
after that the remaining contents of the tmp directory is deleted.
Unfortunately this algorithm doesn't work under Windows because
it disallows removing and moving files, which are in use.
So the new algorithm for background merge has been implemented:
1. Merge source parts into a destination part inside the partition directory itself.
E.g. now the partition directory may contain both complete and incomplete parts.
2. Atomically update the parts.json file with the new list of parts after the merge,
e.g. remove the source parts from the list and add the destination part to the list
before storing it to parts.json file.
3. Remove the source parts from disk when they are no longer used.
This algorithm guarantees that either source parts or destination part
is visible in the partition after unclean shutdown at any step above,
since incomplete partitions from step 1 or old source parts from step 3 are removed
on the next startup by inspecting parts.json file.
This algorithm should work under Windows, since it doesn't remove or move files in use.
This algorithm has also the following benefits:
- It should work better for NFS.
- It fits object storage semantics.
The new algorithm changes data storage format, so it is impossible to downgrade
to the previous versions of VictoriaMetrics after upgrading to this algorithm.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3236
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3821
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/70
* app/vmagent: allow vm proto for kafka consumer and producer
it should reduce network usage up to 50%.
According to benchmarks without any encoding at kafka topic, it reduces traffic up to 50%.
With enabled zstd at kafka topic, it shows no diffence in traffic. So it
doesn't make much sense to use it.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1225
* mention eb61a7dd68b834b08d01727a918f207700348ada at changelog
* app/vmagent: bumps kafka lib version
it allows compiling vmagent for arm64 machines
fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2271
* mention d19b1a888248c96cfd7ccee00ba6f596d89be1d7 at change log
* app/vmagent: adds natural concurrency for kafka consumer
it should improve performance for data consumption
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1957
* mention change 0c143bb22ca2e7e0b7eec9bc84a94ee2b41626ca
* Update app/vmagent/kafka/consumer.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* Update app/vmagent/kafka/consumer_cgo.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* vmalert: support concurrent reading from object storage
Config reading from GCS or S3 can be slow if object storage
contains a big number of files. Object storages are usually
fast for downloading and are slow for individual operations.
If there would be thousands of files to read, vmalert could
spend significant time for retrieving those because it is
done sequentially.
The change introduces ability to read configs from object
storage concurrently. By default, both GCS and S3 are now
read with 50 concurrent readers. This significantly reduces
the load time:
* loading 500 files with concurrency=1 takes 27s
* loading 500 files with concurrency=50 takes <1s
* vmalert: add note to Changelog
* vmalert: cleanup
* vmalert: use ticker properly
* app/vmalert: improve status reporting during config loading
* vmalert: support concurrent reading from object storage
Config reading from GCS or S3 can be slow if object storage
contains a big number of files. Object storages are usually
fast for downloading and are slow for individual operations.
If there would be thousands of files to read, vmalert could
spend significant time for retrieving those because it is
done sequentially.
The change introduces ability to read configs from object
storage concurrently. By default, both GCS and S3 are now
read with 50 concurrent readers. This significantly reduces
the load time:
* loading 500 files with concurrency=1 takes 27s
* loading 500 files with concurrency=50 takes <1s
* app/vmalert: make linter happy
The change also introduces `List` method to `FS` interface.
The `List` method can be used for wildcard support in object storage FS.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
- Sync the description for -httpListenAddr.useProxyProtocol command-line flag at vmagent and vmauth,
so it is consistent with the description at vmauth and victoria-metrics
- Add a sample of panic text to docs/CHANGELOG.md, so it could be googled
- Mention the -httpListenAddr.useProxyProtocol command-line flag in the description for the bugfix
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3335
lib{mergset,storage}: prevent possible race condition with logging stats for merges
Previously partwrapper could be release by background process and reference for part may be invalid
during logging stats. It will lead to panic at vmstorage
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3897
app/vmctl: vm-native - split migration on per-metric basis
`vm-native` mode now splits the migration process on per-metric basis.
This allows to migrate metrics one-by-one according to the specified filter.
This change allows to retry export/import requests for a specific metric and provides a better
understanding of the migration progress.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Use flag.Duration instead of flagutil.Duration for -snapshotCreateTimeout,
since the flagutil.Duration is intended mostly for big durations, e.g. days, months and years,
while the -snapshotCreateTimeout is usually smaller than one hour.
- Add links to https://docs.victoriametrics.com/#how-to-work-with-snapshots in docs/CHANGELOG.md,
so readers could easily find the corresponding docs when reading the changelog.
- Properly remove all the created directories on unsuccessful attempt to create
snapshot in Storage.CreateSnapshot().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3551
* lib/{fs,mergeset,storage}: skip `.must-remove.` dirs when creating snapshot (#3858)
* lib/{mergeset,storage}: add timeout configuration for snapshots creation, remove incomplete snapshots from storage
* docs: fix formatting
* app/vmstorage: add metrics to track status of snapshots
* app/vmstorage: use `vm_http_requests_total` metric for snapshot endpoints metrics, rename new flag to make name more clear
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: update flag name in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* app/vmstorage: reflect new metrics names change in docs
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* lib/promscrape: set `vm_promscrape_config_last_reload_successful` to 1 if there was no promscrape config provided
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* lib/promscrape: register `vm_promscrape_config_*` metrics only in case promscrape config is used
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* vmselect/promql: check for deadline in `count_values` fn
`count_values` could be very slow during the data processing.
Checking for deadline between iterations supposed to reduce
probability of exceeding `search.maxQueryDuration`.
The change also adds a new trace record, which captures the time
spent in aggregation function. Before that, the trace for aggr funcs
could be confusing since it doesn't account for all the places where
time was spent.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
* metricsql: support optional 2nd argument for rollup functions
Support optional 2nd argument `min`, `max` or `avg` for rollup functions:
* rollup
* rollup_delta
* rollup_deriv
* rollup_increase
* rollup_rate
* rollup_scrape_interval
If second argument is passed, then rollup function will return only the selected aggregation type.
This change can be useful for situations where only one type of rollup calculation is needed.
For example, `rollup_rate(requests_total[5m], "max")`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* wip
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Return immediately on context cancel during the backoff sleep.
This should help with https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3747
- Add a comment describing why the second attempt to obtain the response from remote side
is perfromed immediately after the first attempt.
- Remove fasthttp dependency from lib/promscrape/discoveryutils
- Set context deadline before calling doRequestWithPossibleRetry().
This simplifies the doRequestWithPossibleRetry() a bit.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3293
* fix: do not use exponential backoff for first retry of scrape request (#3293)
* lib/promscrape: refactor `doRequestWithPossibleRetry` backoff to simplify logic
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Update lib/promscrape/client.go
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* lib/promscrape: refactor `doRequestWithPossibleRetry` to make it more straightforward
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
- Do not generate __meta_server label, since it is unavailable in Prometheus.
- Add a link to https://docs.victoriametrics.com/sd_configs.html#kuma_sd_configs to docs/CHANGELOG.md,
so users could click it and read the docs without the need to search the corresponding docs.
- Remove kumaTarget struct, since it is easier generating labels for discovered targets
directly from the response returned by Kuma. This simplifies the code.
- Store the generated labels for discovered targets inside atomic.Value. This allows reading them
from concurrent goroutines without the need to use mutex.
- Use synchronouse requests to Kuma instead of long polling, since there is a little sense
in the long polling when the Kuma server may return 304 Not Modified response every -promscrape.kumaSDCheckInterval.
- Remove -promscrape.kuma.waitTime command-line flag, since it is no longer needed when long polling isn't used.
- Set default value for -promscrape.kumaSDCheckInterval to 30s in order to be consistent with Prometheus.
- Remove unnecessary indirections for string literals, which are used only once, in order to improve code readability.
- Remove unused fields from discoveryRequest and discoveryResponse.
- Update tests.
- Document why fetch_timeout and refresh_interval options are missing in kuma_sd_config.
- Add docs to discoveryutils.RequestCallback and discoveryutils.ResponseCallback,
since these are public types.
Side notes: it is weird that Prometheus implementation for kuma_sd_configs sets `instance` label,
since usually this label is set by the Prometheus itself to __address__ after the relabeling phase.
See https://www.robustperception.io/life-of-a-label/
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3389
See https://github.com/prometheus/prometheus/issues/7919
and https://github.com/prometheus/prometheus/pull/8844
as a reference implementation in Prometheus
While at it, stop sending requests to unavailable backend for 3 seconds
before the next attempt. This should reduce the amounts of useless work
and the number of useless network packets when the backend is temporarily unavailable.
* app/vmauth: add concurent requests limit per auth record
* app/vmauth: added clarification comment
* app/vmauth: remove unused code
* app/vmauth: move read from limiter
* app/vmauth: fix text
* app/vmauth: fix comments
* - Clarify the docs for the max_concurrent_requests option at docs/vmauth.md
- Clarify the description of the change at docs/CHANGELOG.md
- Make sure that the -maxConcurrentRequests takes precedence over per-user max_concurrent_requests
- Update tests for verifying that the max_concurrent_requests option is parsed properly
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3346
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Document the change at docs/CHANGELOG.md
- Add `Reading rules from object storage` section to docs/vmalert.md
- Add `s3` prefix to command-line flags related to the configuration of s3 and gcs clients
- Explicitly mention that reading rules from object storage is supported only in enterprise version
* vmalert: use group's ID in UI to avoid collisions
Identical group names are allowed. So we should used IDs
for various groupings and aggregations in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: prevent disabling state updates tracking
The minimum number of update states to track is now set to 1.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: properly update `debug` and `update_entries_limit` params on hot-reload
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: display `debug` field for rule in UI
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: exclude `updates` field from json marhsaling
This field isn't correctly marshaled right now.
And implementing the correct marshaling for it doesn't
seem right, since json representation is mostly used
by systems like Grafana. And Grafana doesn't expect this
field to be present.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* fix test for disabled state
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmalert: speed up state restore procedure on start
Alerts state restore procedure has been changed to become asynchronous.
It doesn't block groups start anymore which significantly improves vmalert's startup time.
Instead, state restore is called by each group in their goroutines after the first rules
evaluation.
While previously state restore attempt was made for all loaded alerting rules,
now it is called only for alerts which became active after the first evaluation.
This reduces the amount of API calls to the configured remote read URL.
This also means that `remoteRead.ignoreRestoreErrors` command-line flag becomes deprecated now
and will have no effect if configured.
See relevant issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2608
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* make lint happy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* Apply suggestions from code review
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This allows better controlling requests to backends and providing better error logging.
For example, if the backend was unavailable, then the ReverseProxy was logging the error
message without client ip and the initial request uri. This could harden debugging.
This is based on https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3486
* feat: include fonts in the build
* fix: reduce size fonts
* wip
- Document the change at docs/CHANGELOG.md
- Run `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Allow users fine-tuning the maximum string length for interning via -internStringMaxLen command-line flag.
This may be used for fine-tuning RAM vs CPU usage for certain workloads.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3692
- Document the fix at docs/CHANGELOG.md
- Limit the concurrency for sendStaleMarkers() function in order to limit its memory usage
when big number of targets disappear and staleness markers are sent
for all the metrics exposed by these targets.
- Make sure that the writeRequestCtx is returned to the pool
when there is no need to send staleness markers.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3668
* feat: make the step input field global
* fix: correct get step from url
* fix: set minimumSignificantDigits to 1
* app/vmselect/vmui: `make vmui-update`
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
vmselect passes query timeout to vmstorage in seconds.
The commit 20e9598254 treated it as timeout in nanoseconds.
Fix this in order to prevent from the following errors under vmstorage load:
cannot process vmselect request: cannot execute "search_v7": couldn't start executing the request in 0.000 seconds,
since -search.maxConcurrentRequests=... concurrent requests are already executed.
The per-series timestamps are usually shared among series, so it is unsafe modifying them.
The issue has been appeared after the optimization at 2f3ddd4884
* {lib/server, app/}: use `httpAuth.*` flag as fallback for `*AuthKey` if it is not set
* lib/ingestserver/opentsdbhttp: fix opentdb HTTP handler not respecting `httpAuth.*` flags
* Apply suggestions from code review
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Use promutils.Labels.GetLabels() instead of comparing promutils.Labels.Labels to nil.
This make the code more consistent with other places.
- Mention the release where the issue has been introduced at docs/CHANGELOG.md.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3624
This should reduce memory usage when scraping big number of targets,
since this limits the summary memory usage during concurrent parsing and relabeling
by the number of available CPU cores.
Previously the -maxConcurrentInserts was limiting the number of established client connections,
which write data to VictoriaMetrics. Some of these connections could be idle.
Such connections do not consume big amounts of CPU and RAM, so there is a little sense in limiting
the number of such connections. So now the -maxConcurrentInserts command-line option
limits the number of concurrently executed insert requests, not including idle connections.
It is recommended removing -maxConcurrentInserts command-line option, since the default value
for this option should work good for most cases.
This should prevent from out of memory errors when big number of vmselect
nodes send many concurrent requests to vmstorage
The limit can be controlled at vmstorage via the following command-line flags:
- search.maxConcurrentRequests
- search.maxQueueDuration
See https://docs.victoriametrics.com/Cluster-VictoriaMetrics.html#resource-usage-limits
- Document the bugfix at docs/CHANGELOG.md
- Wait until all the worker goroutines are done in consulWatcher.mustStop()
- Do not log `context canceled` errors when discovering consul serviceNames
- Removed explicit handling of gzipped responses at lib/promscrape/discoveryutils.Client,
since this handling is automatically performed by net/http.Transport.
See DisableCompression option at https://pkg.go.dev/net/http#Transport .
- Remove explicit handling of the proxyURL, since it is automatically handled
by net/http.Transport. See Proxy option at https://pkg.go.dev/net/http#Transport .
- Expliticly set MaxIdleConnsPerHost, since its default value equals to 2.
Such a small value may result in excess tcp connection churn
when more than 2 concurrent requests are processed by lib/promscrape/discoveryutils.Client.
- Do not set explicitly the `Host` request header, since it is automatically set by net/http.Client.
- Backport the bugfix to the recently added nomad_sd_configs - see https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3367
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3468
- Remove undocumented `username` and `password` config options from `nomad_sd_config`.
TODO: probably, remove these options from `consul_sd_config` too?
These options exist there for backwards compatibility purposes.
- Add __meta_nomad_service_alloc_id and __meta_nomad_service_job_id meta-labels
These labels contain AllocID and JobID fields for the discovered Nomad services.
- Various typo fixes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3367
Before, if the imported line contained multiple metrics and one
or more of them had an empty values - the whole line was ignored.
Now, only metrics with empty values are ignored, and the rest
of the metrics are accepted successfully.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3540
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Allow configuring the default number of stored rule's update states in memory
via global `-rule.updateEntriesLimit` command-line flag or per-rule via rule's
`update_entries_limit` configuration param.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This simplifies manual usage of the APIs. For example, the following query
would return the results over the 2022 year.
/api/v1/query_range?start=2022&end=2023&step=1d&query=...
This is equivalent to:
/api/v1/query_range?start=2022-01-01T00:00:00Z&end=2023-01-01T00:00:00Z&step=1d&query=...
- Document the feature at docs/CHANGELOG.md.
- Document the metrics explorer at https://docs.victoriametrics.com/#metrics-explorer .
- Properly set `start` and `end` args for the selected time range
when performing the request, which returns metric names.
- Improve queries, so they return lower number of lines and labels.
This should improve metrics' exploration.
- Properly encode label filters and query args before passing them to VictoriaMetrics.
- Various cosmetic fixes.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3386
* vmagent: respect `-usePromCompatibleNaming` if no relabeling is set
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3493
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* vmagent: upd test
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously too short lookbehind window d for rate(m[d]) could be automatically extended
if it didn't cover at least two raw samples. This was needed in order to guarantee
non-empty results from rate(m[d]) on short time ranges.
Now the lookbehind window isn't extended if it is set explicitly,
since it is expected that the user knows what he is doing.
The lookbehind window continues to be extended when needed if it isn't set explicitly.
For example, in the case of rate(m).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3483
The issue triggers after the indexdb rotation for time series, which stop receiving new samples.
This results in missing data for such time series in query responses.
This commit should address the https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3502
The issue has been introduced in 2dd93449d8
- Document the change at docs/CHANELOG.md
- Log fatal errors if the -loggerJSONFields contains unexpected values
- Rename -loggerJsonFields to -loggerJSONFields for the sake of consistency naming commonly used in Go
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2348
support overriding of `-search.latencyOffset` value via
URL param `latency_offset`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3481
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This fixes handling of values bigger than 2GiB for the following command-line flags:
- -storage.minFreeDiskSpaceBytes
- -remoteWrite.maxDiskUsagePerURL
Blocked small merges may result into big number of small parts, which, in turn,
may result in increased CPU and memory usage during queries, since queries need to inspect
all the existing small parts.
The issue has been introduced in 8189770c50
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
Previously only up to 100K results were cached.
This could result in sub-optimal performance when more than 100K unique strings were actually used.
For example, when the relabeling rule was applied to a million of unique Graphite metric names
like in the https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3466
This commit should reduce the long-term CPU usage for https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3466
after all the unique Graphite metrics are registered in the FastStringMatcher.Transform() cache.
It is expected that the number of unique strings, which are passed to FastStringMatcher.Match(),
FastStringTransformer.Transform() and to InternString() during the last 5 minutes,
is limited, so the function results fit memory. Otherwise OOM crash can occur.
This should be the case for typical production workloads.
This should simplify further debugging, since the first thing to start the debugging by query trace
is to know the version of VictoriaMetrics, which produced this trace.
- Document the change at docs/CHANGELOG.md
- Run `make docs-sync` for copying app/vmgateway/README.md to docs/vmgateway.md
in order to propagate docs' changes to https://docs.victoriametrics.com/vmgateway.html
* vmalert: correctly return error for RW failures
By mistake, in 0989649ad0 the error
for remote write failures weren't return to user.
This change fixes it.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The main purpose of this command-line flag is to increase the lifetime of low-end flash storage
with the limited number of write operations it can perform. Such flash storage is usually
installed on Raspberry PI or similar appliances.
For example, `-inmemoryDataFlushInterval=1h` reduces the frequency of disk write operations
to up to once per hour if the ingested one-hour worth of data fits the limit for in-memory data.
The in-memory data is searchable in the same way as the data stored on disk.
VictoriaMetrics automatically flushes the in-memory data to disk on graceful shutdown via SIGINT signal.
The in-memory data is lost on unclean shutdown (hardware power loss, OOM crash, SIGKILL).
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3337
The recent change in modifying default value
of `datasource.queryStep` flag resulted in situation
where replay mode was always running queries with
step=`datasource.queryStep`. When it should always
use rule's evaluation interval.
The fix is related not to replay mode only, but
for all Range requests. Now step param is set
individually for each mode.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmalert: add `remoteWrite.sendTimeout` command-line flag to configure timeout for sending data to `remoteWrite.url`
* vmalert: remove WriteTimeout from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the WriteTimeout.
* vmalert: remove DisablePathAppend from clients Cfg
No need to have it as a part of configuration struct:
* the client isn't used by other packages;
* there are no internal tests to check the DisablePathAppend.
Co-authored-by: hagen1778 <roman@victoriametrics.com>
- Return meta-labels for the discovered targets via promutils.Labels
instead of map[string]string. This improves the speed of generating
meta-labels for discovered targets by up to 5x.
- Remove memory allocations in hot paths during ScrapeWork generation.
The ScrapeWork contains scrape settings for a single discovered target.
This improves the service discovery speed by up to 2x.
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* {app/vmstorage,app/vmselect}: add API to get list of existing tenants
* app/vmselect: fix error message
* {app/vmstorage,app/vmselect}: fix error messages
* app/vmselect: change log level for error handling
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
The default list of alerting rules contains the basic
rules for checking vmalert's health state and is recommended
to use for monitoring vmalert deployments.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The issue was in the `labels := dst[offset:]` line in the beginning of appendExtraLabels() function.
The `dst` may be re-allocated when adding extra labels to it. In this case the addition of `exported_`
prefix to labels inside `labels` slice become invisible in the returned `dst` labels.
While at it, properly handle some corner cases:
- Add additional `exported_` prefix to clashing metric labels with already existing `exported_` prefix.
- Store scraped metric names in `exported___name__` label if scrape target contains `__name__` label.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3278
Thanks to @jplanckeel for the initial attempt to fix this issue
at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/3281
Previously the `quotesEscape` function was escaping only double quotes.
This wasn't enough, since the input string could contain other special chars,
which must be escaped when put inside JSON string. For example, carriage return and line feed chars (\n\r),
backslash char, etc. This led to the following issues, which were improperly fixed:
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/890 - this issue
was "fixed" by introducing the `crlfEscape` function, which led to unnecessary
complications in user templates, while not fixing various corner cases
such as backslash chars in the input string.
See 1de15ad490
- https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 - this issue
was "fixed" by urlencoding the whole string passed to -external.alert.source
command-line flag. This led to invalid urls, which couldn't be parsed by Grafana.
See 00c838353d
and 4bd0244599
This commit properly encodes the input string passed to `quotesEscape`, so it can be safely embedded inside JSON strings.
This commit deprecates crlfEscape template function and adds the following new template functions:
- strvalue and stripDomain - these functions are supported by Prometheus, so they were added
for compatibility purposes.
- jsonEscape and htmlEscape for converting the input string to valid quoted JSON string
and for html-escaping the input string, so it could be safely embedded as a plaintext
into html.
This commit also documents all supported template functions at https://docs.victoriametrics.com/vmalert.html#template-functions
The deprecated crlfEscape function isn't documented on purpose, since its usefulness is negative in general case.
This reverts commit 00c838353d.
Reason for revert: it incorrectly fixes the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3139 .
Now `-external.alert.source=explore?orgId=1&left=...` is converted to the following invalid url, which cannot be handled by Grafana:
https://grafana.example.com/explore%3ForgId%3D1%26left%3D...
The next commit will contain the correct fix of the issue - the `quotesEscape` function must
properly escape the string, so it could be embedded into JSON string. This function must
properly escape \n\r chars too. In this case the `crlfEscape` function becomes unnecessary.
Actually, the next commit makes the `crlfEscape` function deprecated.
The searchTSIDs function was searching for metricIDs matching the the given tag filters
and then was locating the corresponding TSID entries for the found metricIDs.
The TSID entries aren't needed when searching for time series names (aka MetricName),
so this commit removes the uneeded TSID search from the implementation of /api/v1/series API.
This improves perfromance of /api/v1/series calls.
This commit also improves performance a bit for /api/v1/query and /api/v1/query_range calls,
since now these calls cache small metricIDs instead of big TSID entries
in the indexdb/tagFilters cache (now this cache is named indexdb/tagFiltersToMetricIDs)
without the need to compress the saved entries in order to save cache space.
This commit also removes concurrency limiter during searching for matching time series,
which was introduced in 8f16388428, since the concurrency
for all the read queries is already limited with -search.maxConcurrentRequests command-line flag.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/648
The message about dropped data still remains at `error` level.
The change supposed to make log message more clear about how
serious it is.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* feat: add maximum display series by tabs
* feat: add warning on PredefinedPanels.tsx
* docs/CHANGELOG.md: vmui limit number of plotted series
* docs/CHANGELOG.md: vmui limit number of plotted series
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Sort labels explicitly after calling the ParsedConfigs.Apply() when needed.
This reduces CPU usage when performing metric-level relabeling, where labels' sorting isn't needed.
Previously the `__address__` label could contain only `host:port` part of the target url,
while the scheme and metrics path were obtained from `__scheme__` and `__metrics_path__`
labels. Now it is possible to set the full url in `__address__` label.
This makes valid the following scrape config, which is frequently used by novice users:
scrape_configs:
- job_name: foo
static_configs:
- targets:
- http://host1/metrics1
- https://host2/metrics2
* Optimize fast path for /api/v1/import when importing numeric values
* Move the docs about the change from features to bugfixes at docs/CHANGELOG.md
* Update tests at lib/protoparser/vmimport
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3161
* app/vmselect: properly work when export import json from `api/v1/{export, import}` API
* app/vmselect: update convert function
* app/vmselect: export null if `math.IsNaN(v)`
* app/vmselect: get float from json
* lib/protoparser: add test
* docs: add change log
* lib/protoparser: make export import api compatible
* Document the addition of Azure blob storage support in vmbackup / vmrestore
* List the supported storage system types at docs/vmrestore.md
* Mention about azblob storage system support at -src and -dst command-line flags
for vmbackup / vmrestore tools.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1029
The change is supposed to provide additional flexibility for generating alert's
source link based on label values.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vminsert: allows parsing tenant id from labels
it should help mitigate issues with vmagent's multiTenant mode, which works incorrectly at heavy load
and it cannot handle more then 100 different tenants.
This functional hidden with flag and do not change vminsert default behaviour
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2970
* Update docs/Cluster-VictoriaMetrics.md
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
* wip
* app/vminsert/netstorage: clean remaining labels in order to free up GC
* docs/Cluster-VictoriaMetrics.md: typo fix
* wip
* wip
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Allow configuring authorization params per list of targets
in vmalert's notifier config for `static_configs`.
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2690
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Cache `action: replace` results for non-trivial regexs and return them next time
instead of performing CPU-intensive regex replacement.
Optimize also `action: labelmap_all` and `action: replace_all` in the same way.
Previously empty series (e.g. series with all NaN samples) were passed to aggregate functions.
Such series must be ingored by all the aggregate functions.
So it is better from consistency PoV filtering out empty series before applying aggregate functions.
* app/vmselect: ignore empty series for `limit_offset`
VictoriaMetrics doesn't return empty series (with all NaN values) to
the user. But such series are filtered after transform functions.
It means `limit_offset` will account for empty series as well.
For example, let's consider following data set:
```
time series:
foo{label="1"} NaN, NaN, NaN, NaN // empty series
foo{label="2"} 1, 2, 3, 4
foo{label="3"} 4, 3, 2, 1
```
When user requests all series for metric `foo` the empty series
will be filtered out:
```
/query=foo:
foo{label="v2"} 1, 2, 3, 4
foo{label="v3"} 4, 3, 2, 1
```
But `limit_offset(1, 1, foo)` is applied to original series, not filtered yet.
So it will return `foo{label="v2"}` (skips the first in list)
```
/query=limit_offset(1, 1, foo):
foo{label="v2"} 1, 2, 3, 4
```
Expected result would be to apply `limit_offset` to already filtered list,
so in result we receive `foo{label="v3"}`:
```
/query=limit_offset(1, 1, foo):
foo{label="v3"} 4, 3, 2, 1
```
The change does exactly that - filters empty series before applying `limit_offset`.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* app/vmselect: ignore empty series for `limit_offset`
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* lib/{httpserver,netutil}: allow to define min and max TLS version of the http server
* lib/httpserver: added descriptions about tls supported versions
* lib/netutil: check minimal tls version, added supported tls versions to error
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
