- Drop samples and return true from remotewrite.TryPush() at fast path when all the remote storage
systems are configured with the disabled on-disk queue, every in-memory queue is full
and -remoteWrite.dropSamplesOnOverload is set to true. This case is quite common,
so it should be optimized. Previously additional CPU time was spent on per-remoteWriteCtx
relabeling and other processing in this case.
- Properly count the number of dropped samples inside remoteWriteCtx.pushInternalTrackDropped().
Previously dropped samples were counted only if -remoteWrite.dropSamplesOnOverload flag is set.
In reality, the samples are dropped when they couldn't be sent to the queue because in-memory queue is full
and on-disk queue is disabled.
The remoteWriteCtx.pushInternalTrackDropped() function is called by streaming aggregation for pushing
the aggregated data to the remote storage. Streaming aggregation cannot wait until the remote storage
processes pending data, so it drops aggregated samples in this case.
- Clarify the description for -remoteWrite.disableOnDiskQueue command-line flag at -help output,
so it is clear that this flag can be set individually per each -remoteWrite.url.
- Make the -remoteWrite.dropSamplesOnOverload flag global. If some of the remote storage systems
are configured with the disabled on-disk queue, then there is no sense in keeping samples
on some of these systems, while dropping samples on the remaining systems, since this
will result in global stall on the remote storage system with the disabled on-disk queue
and with the -remoteWrite.dropSamplesOnOverload=false flag. vmagent will always return false
from remotewrite.TryPush() in this case. This will result in infinite duplicate samples
written to the remaining remote storage systems. That's why the -remoteWrite.dropSamplesOnOverload
is forcibly set to true if more than one -remoteWrite.disableOnDiskQueue flag is set.
This allows proceeding with newly scraped / pushed samples by sending them to the remaining
remote storage systems, while dropping them on overloaded systems with the -remoteWrite.disableOnDiskQueue flag set.
- Verify that the remoteWriteCtx.TryPush() returns true in the TestRemoteWriteContext_TryPush_ImmutableTimeseries test.
- Mention in vmagent docs that the -remoteWrite.disableOnDiskQueue command-line flag can be set individually per each -remoteWrite.url.
See https://docs.victoriametrics.com/vmagent/#disabling-on-disk-persistence
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6248
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065
This makes test code more clear and reduces the number of code lines by 500.
This also simplifies debugging tests. See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e
While at it, consistently use t.Fatal* instead of t.Error* across tests, since t.Error*
requires more boilerplate code, which can result in additional bugs inside tests.
While t.Error* allows writing logging errors for the same, this doesn't simplify fixing
broken tests most of the time.
This is a follow-up for a9525da8a4
This simplifies debugging tests and makes the test code more clear and concise.
See https://itnext.io/f-tests-as-a-replacement-for-table-driven-tests-in-go-8814a8b19e9e
While at is, consistently use t.Fatal* instead of t.Error* across tests, since t.Error*
requires more boilerplate code, which can result in additional bugs inside tests.
While t.Error* allows writing logging errors for the same, this doesn't simplify fixing
broken tests most of the time.
This is a follow-up for a9525da8a4
Consistently using t.Fatal* simplifies the test code and makes it less fragile, since it is common error
to forget to make proper cleanup after t.Error* call. Also t.Error* calls do not provide any practical
benefits when some tests fail. They just clutter test output with additional noise information,
which do not help in fixing failing tests most of the time.
This is a follow-up for a9525da8a4
### Describe Your Changes
In most cases histograms are exposed in sorted manner with lower buckets
being first. This means that during scraping buckets with lower bounds
have higher chance of being updated earlier than upper ones.
Previously, values were propagated from upper to lower bounds, which
means that in most cases that would produce results higher than expected
once all buckets will become updated.
Propagating from upper bound effectively limits highest value of
histogram to the value of previous scrape. Once the data will become
consistent in the subsequent evaluation this causes spikes in the
result.
Changing propagation to be from lower to higher buckets reduces value
spikes in most cases due to nature of the original inconsistency.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4580
An example histogram with previous(red) and updated(blue) versions:
![1719565540](https://github.com/VictoriaMetrics/VictoriaMetrics/assets/1367798/605c5e60-6abe-45b5-89b2-d470b60127b8)
This also makes logic of filling nan values with lower buckets values: [1 2 3 nan nan nan] => [1 2 3 3 3 3] obsolete.
Since buckets are now fixed from lower ones to upper this happens in the main loop, so there is no need in a second one.
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Andrii Chubatiuk <andrew.chubatiuk@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6a4bd5049b)
'any' type is supported starting from Go1.18. Let's consistently use it
instead of 'interface{}' type across the code base, since `any` is easier to read than 'interface{}'.
The change adds a new docs section with examples on how source can be
overridden. It should address questions like
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6536
While there, fix the example in `external.alert.source` cmd-line flag
and docker-compose examples.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit c429bbf889)
Reason for revert:
There are many statsd servers exist:
- https://github.com/statsd/statsd - classical statsd server
- https://docs.datadoghq.com/developers/dogstatsd/ - statsd server from DataDog built into DatDog Agent ( https://docs.datadoghq.com/agent/ )
- https://github.com/avito-tech/bioyino - high-performance statsd server
- https://github.com/atlassian/gostatsd - statsd server in Go
- https://github.com/prometheus/statsd_exporter - statsd server, which exposes the aggregated data as Prometheus metrics
These servers can be used for efficient aggregating of statsd data and sending it to VictoriaMetrics
according to https://docs.victoriametrics.com/#how-to-send-data-from-graphite-compatible-agents-such-as-statsd (
the https://github.com/prometheus/statsd_exporter can be scraped as usual Prometheus target
according to https://docs.victoriametrics.com/#how-to-scrape-prometheus-exporters-such-as-node-exporter ).
Adding support for statsd data ingestion protocol into VictoriaMetrics makes sense only if it provides
significant advantages over the existing statsd servers, while has no significant drawbacks comparing
to existing statsd servers.
The main advantage of statsd server built into VictoriaMetrics and vmagent - getting rid of additional statsd server.
The main drawback is non-trivial and inconvenient streaming aggregation configs, which must be used for the ingested statsd metrics (
see https://docs.victoriametrics.com/stream-aggregation/ ). These configs are incompatible with the configs for standalone statsd servers.
So you need to manually translate configs of the used statsd server to stream aggregation configs when migrating
from standalone statsd server to statsd server built into VictoriaMetrics (or vmagent).
Another important drawback is that it is very easy to shoot yourself in the foot when using built-in statsd server
with the -statsd.disableAggregationEnforcement command-line flag or with improperly configured streaming aggregation.
In this case the ingested statsd metrics will be stored to VictoriaMetrics as is without any aggregation.
This may result in high CPU usage during data ingestion, high disk space usage for storing all the unaggregated
statsd metrics and high CPU usage during querying, since all the unaggregated metrics must be read, unpacked and processed
during querying.
P.S. Built-in statsd server can be added to VictoriaMetrics and vmagent after figuring out more ergonomic
specialized configuration for aggregating of statsd metrics. The main requirements for this configuration:
- easy to write, read and update (ideally it should work out of the box for most cases without additional configuration)
- hard to misconfigure (e.g. hard to shoot yourself in the foot)
It would be great if this configuration will be compatible with the configuration of the most widely used statsd server.
In the mean time it is recommended continue using external statsd server.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6265
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5053
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5052
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/206
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4600
This reverts commit 5a3abfa041.
Reason for revert: exemplars aren't in wide use because they have numerous issues which prevent their adoption (see below).
Adding support for examplars into VictoriaMetrics introduces non-trivial code changes. These code changes need to be supported forever
once the release of VictoriaMetrics with exemplar support is published. That's why I don't think this is a good feature despite
that the source code of the reverted commit has an excellent quality. See https://docs.victoriametrics.com/goals/ .
Issues with Prometheus exemplars:
- Prometheus still has only experimental support for exemplars after more than three years since they were introduced.
It stores exemplars in memory, so they are lost after Prometheus restart. This doesn't look like production-ready feature.
See 0a2f3b3794/content/docs/instrumenting/exposition_formats.md (L153-L159)
and https://prometheus.io/docs/prometheus/latest/feature_flags/#exemplars-storage
- It is very non-trivial to expose exemplars alongside metrics in your application, since the official Prometheus SDKs
for metrics' exposition ( https://prometheus.io/docs/instrumenting/clientlibs/ ) either have very hard-to-use API
for exposing histograms or do not have this API at all. For example, try figuring out how to expose exemplars
via https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus .
- It looks like exemplars are supported for Histogram metric types only -
see https://pkg.go.dev/github.com/prometheus/client_golang@v1.19.1/prometheus#Timer.ObserveDurationWithExemplar .
Exemplars aren't supported for Counter, Gauge and Summary metric types.
- Grafana has very poor support for Prometheus exemplars. It looks like it supports exemplars only when the query
contains histogram_quantile() function. It queries exemplars via special Prometheus API -
https://prometheus.io/docs/prometheus/latest/querying/api/#querying-exemplars - (which is still marked as experimental, btw.)
and then displays all the returned exemplars on the graph as special dots. The issue is that this doesn't work
in production in most cases when the histogram_quantile() is calculated over thousands of histogram buckets
exposed by big number of application instances. Every histogram bucket may expose an exemplar on every timestamp shown on the graph.
This makes the graph unusable, since it is litterally filled with thousands of exemplar dots.
Neither Prometheus API nor Grafana doesn't provide the ability to filter out unneeded exemplars.
- Exemplars are usually connected to traces. While traces are good for some
I doubt exemplars will become production-ready in the near future because of the issues outlined above.
Alternative to exemplars:
Exemplars are marketed as a silver bullet for the correlation between metrics, traces and logs -
just click the exemplar dot on some graph in Grafana and instantly see the corresponding trace or log entry!
This doesn't work as expected in production as shown above. Are there better solutions, which work in production?
Yes - just use time-based and label-based correlation between metrics, traces and logs. Assign the same `job`
and `instance` labels to metrics, logs and traces, so you can quickly find the needed trace or log entry
by these labes on the time range with the anomaly on metrics' graph.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5982
- Export streamaggr.LoadFromData() function, so it could be used in tests outside the lib/streamaggr package.
This allows removing a hack with creation of temporary files at TestRemoteWriteContext_TryPush_ImmutableTimeseries.
- Move common code for mustParsePromMetrics() function into lib/prompbmarshal package,
so it could be used in tests for building []prompbmarshal.TimeSeries from string.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6206
Move the code responsible for relabelCtx clearing into deferred function.
This allows making more clear the remoteWriteCtx.TryPush code.
This is a follow-up for 879771808b
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
While at it, clarify the description of the bugfix at docs/CHANGELOG.md
Use metricsql.IsLikelyInvalid() function for determining whether the given query is likely invalid,
e.g. there is high change the query is incorrectly written, so it will return unexpected results.
The query is invalid most of the time if it passes something other than series selector into rollup function.
For example:
- rate(sum(foo))
- rate(foo + bar)
- rate(foo > bar)
Improtant note: the query is considered valid if it misses the lookbehind window in square brackes inside rollup function,
e.g. rate(foo), since this is very convenient MetricsQL extention to PromQL, and this query returns the expected results
most of the time.
Other unsafe query types can be added in the future into metricsql.IsLikelyInvalid().
TODO: probably, the -search.disableImplicitConversion command-line flag must be set by default in the future releases of VictoriaMetrics.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4338
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6180
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6450
Previously the in-memory buffer could remain unflushed for long periods of time under low ingestion rate.
The ingested logs weren't visible for search during this time.
### Describe Your Changes
- added stale metrics counters for input and output samples
- added labels for aggregator metrics =>
`name="{rwctx}:{aggrId}:{aggrSuffix}"`
- rwctx - global or number starting from 1
- aggrid - aggregator id starting from 1
- aggrSuffix - <interval>_(by|without)_label1_label2_labeln
e.g: `name="global:1:1m_without_instance_pod"`
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 861852f262)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Fixes#6453
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
- Fixed the update of the relative time range when `Execute Query` is
clicked
- Optimized server requests: now, if an error occurs in the `/query`
request, the `/hits` request will not be executed.
#6345 (duplicates: #6440, #6312)
(cherry picked from commit 43342745ac)
The TryParseTimestampRFC3339Nano() must properly parse RFC3339 timestamps with timezone offsets.
While at it, make tryParseTimestampISO8601 function private in order to prevent
from improper usage of this function from outside the lib/logstorage package.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6508
This reverts commit 5ecf439078.
Reason for revert: the previous logic was correct.
The purpose of `-search.maxSamplesPerQuery` command-line flag is to limit the amounts of CPU resources,
which could be taken by a single query - see https://docs.victoriametrics.com/#resource-usage-limits .
VictoriaMetrics processes samples in blocks during querying - it reads the block, then unpacks it,
then filters out samples outside the selected time range. This means that it _spends CPU time_
on reading and unpacking of _all the samples_ in every block on the requested time range,
even if only a single sample per each block matches the given time range.
The previous logic was effectively limiting CPU time a single query could take.
The new logic fails limiting CPU time a single query could take in some pathological cases
when only a small fraction of samples per each requested block fit the requested time range.
This allows performing multiplication DoS-attacks by querying very narrow time ranges over historical blocks,
which tend to be full. For example, if the `-search.maxSamplesPerQuery` equals to a billion,
and the query requests a single sample out of 8K samples per each block, this means that the query
may unpack a billion of such blocks without exceeding the limit, e.g. it may unpack and process 8K*1e9=8e12 samples.
This is not what the resource usage limits were created for originally - see https://docs.victoriametrics.com/#resource-usage-limits
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6464
* rm extra interface method for rw Client, as it has low applicability
and doesn't fit multitenancy well
* add `GetDroppedRows` method instead
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4ef76eed7b)
- Added a bar chart displaying the number of log entries over a time
range.
#6404
- When `_msg` is empty, all fields are displayed in a single line.
- Added double quotes when copying pairs: `key: "value"`.
- Minor style adjustments.
(cherry picked from commit 32fbffedd9)
Check for ranged vector arguments in aggregate expressions when
`-search.disableImplicitConversion` or `-search.logImplicitConversion`
are enabled.
For example, `sum(up[5m])` will fail to execute if these flags are set.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [*] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6149adbe10)
The limit is specified with command-line flag
`-search.maxSamplesPerQuery`.
Previously, samples might be over-counted and query can't be fixed by
reducing time range.
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5851
(cherry picked from commit 6e395048d3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This change fixes the following panic:
```
2024-06-04T11:16:52.899Z warn app/vmauth/auth_config.go:353 cannot discover backend SRV records for http://srv+localhost:8080: lookup localhost on 10.100.10.4:53: server misbehaving; use it literally
panic: runtime error: integer divide by zero
goroutine 9 [running]:
github.com/VictoriaMetrics/VictoriaMetrics/lib/httpserver.handlerWrapper.func1()
/Users/lhhdz/wd/projects/go/VictoriaMetrics/lib/httpserver/httpserver.go:291 +0x58
panic({0x103115100?, 0x10338d700?})
/Users/lhhdz/go/pkg/mod/golang.org/toolchain@v0.0.1-go1.22.3.darwin-arm64/src/runtime/panic.go:770 +0x124
main.getLeastLoadedBackendURL({0x0?, 0x22?, 0x1400014757b?}, 0x1400013c120?)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:473 +0x210
main.(*URLPrefix).getBackendURL(0x140000aa080)
/Users/lhhdz/wd/projects/go/VictoriaMetrics/app/vmauth/auth_config.go:312 +0xb8
```
---------
Co-authored-by: Haley Wang <haley@victoriametrics.com>
* fixes linter error
* simplify code a bit
* fixes bug with incorrectly set configSuccess metric. It was not set to
1 in case of config rollback
Signed-off-by: f41gh7 <nik@victoriametrics.com>
When I use vminsert's `relabelConfig`, I found that now there is no
reloaded api. However, `vminsert` under `VM-Single` has it. So, I hope
to add it to the `cluster/vminster`.
---------
Signed-off-by: z-anshun <1179798460@qq.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Add support for markdown format and emoji for the `_msg` field in the
"Group" view.
Add markdown rendering toggle. Disabled by default. Value is stored in
`localStorage`.
It is better to remove deprecated flag completely, so vmctl will
fail if this flag is used and user can immediately fix the issue.
Before, flag was ignored and it is worse then fail fast.
follow-up after 8b46bb0c41 (diff-2bfab3db5cc1baf4c6d3ff6b19901926e3bdf4411ec685dac973e5fcff1c723b)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8d95522529)
* adds idleConnTimeout flag, which must reduce probability of `broken
pipe` and `connection reset` errors.
* one-time retry trivial network requests for the same backend
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d44058bcd6)
* deprecate `--vm-disable-progress-bar` in favour of `--disable-progress-bar`
* new `--disable-progress-bar` consistently disables usage of progress bar
for all migration modes.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6367
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8b46bb0c41)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
…pAuth.*
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6329,
makes `reloadAuthKey`, `configAuthKey`, `flagsAuthKey`, `pprofAuthKey`
behavior the same way,
but keys like `-snapshotAuthKey`, `-forceMergeAuthKey` are still
protected by httpAuth.*. All the available key are listed in
https://docs.victoriametrics.com/single-server-victoriametrics/#security.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 61dce6f2a1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Unsupported path is already handled by `lib/httpserver`.
This prevents from misleading errors in logs caused by double-writing response headers.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a5f81f67fd)
* "*.idleConnTimeout" flags must reduce probability of `write: broken
pipe` and `read: connection reset by peer` errors Those errors may occur
if remote server closes TCP socket for connection, while it's still
exist at client.
* single time retries for `write: broken pipe` and `read: connection
reset by peer` must handle a case for incorrectly configured timeouts at
middleware proxies, mitigate minor network issues.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5661
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit b97916276f)
use GetOptionalArg instead of index to fallback to a first argument if
index is absent for remotewrite.streamaggr.config
(cherry picked from commit 7e5a206057)
It allows to create alert for possible item drops at indexdb. It may
happen, if ingested metric size exceeds max indexdb item size.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 69d244e6fb)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Update wording to highlight that cache is not persistent if flag is
value is empty. Previously, it was not clear if cache is not used at all
or just not persistent.
* It must reduce memory usage for misbehaving clients. Since
VictoriaMetrics stores sparse index inmemory.
* Reduce disk space usage for indexdb.
* Prevent possible indexDB items drops.
* It may trigger slow insert and new timeseries registration due to
default value for flag change
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6176
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
This PR fixes an issue where parsing long `_msg` values caused errors,
resulting in some log records not being displayed.
The error occurred due to partial processing of strings. In some cases,
a long record could be split into multiple chunks, causing only part of
the record to be processed instead of the entire entry.
#6281
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Prevent excessive resource usage when stream aggregation config file
contains no matchers by prevent pushing data into Aggregators object.
Before this change a lot of extra work was invoked without reason.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 7ce052b32d)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Occasionally, vmagent sends empty blocks to downstream servers. If a
downstream server returns an unexpected response, vmagent gets stuck in
a retry loop. While vmagent handles 400 and 409 errors, there are
various prometheus remote write implementations that return different
error codes. For example, vector returns a 422 error. To mitigate the
risk of vmagent getting stuck in a retry loop, it is advisable to skip
sending empty blocks to downstream servers.
Co-authored-by: hao.peng <hao.peng@smartx.com>
Co-authored-by: Zhu Jiekun <jiekun.dev@gmail.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 3661373cc2)
* adds datadog extensions for statsd:
- multiple packed values (v1.1)
- additional types distribution, histogram
* adds type check and append metric type to the labels with special tag
name `__statsd_metric_type__`. It simplifies streaming aggregation
config.
* remove statsd support from cluster, since cluster doesn't support
stream aggregation.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b2765c45d0)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Allocations are reduced by implementing custom json parser via fastjson
lib.
The change also re-uses `promInstant` object in attempt to reduce number
of
allocations when parsing big responses, as usually happens with heavy
recording rules.
```
name old allocs/op new allocs/op delta
ParsePrometheusResponse/Instant-10 9.65k ± 0% 5.60k ± 0% ~ (p=1.000 n=1+1)
```
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4f0525852f)
Allocations are reduced by re-using the byte buffer when converting
labels to string keys.
```
name old allocs/op new allocs/op delta
GetStaleSeries-10 703 ± 0% 203 ± 0% ~ (p=1.000 n=1+1)
```
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b0c1f3d819)
it's needed to remove Summary metric type from the global state of
metrics package. metrics package tracks each bucket of summary and
periodically swaps old buckets with new.
Simple set unregister is not enough to release memory used by Set
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6247
(cherry picked from commit 6a6e34ab8e)
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html):
allow configuring `-remoteWrite.disableOnDiskQueue` and
`-remoteWrite.dropSamplesOnOverload` cmd-line flags per each
`-remoteWrite.url`. See this [pull
request](https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6065).
Thanks to @rbizos for implementaion!
* FEATURE: [vmagent](https://docs.victoriametrics.com/vmagent.html): add
labels `path` and `url` to metrics
`vmagent_remotewrite_push_failures_total` and
`vmagent_remotewrite_samples_dropped_total`. Now number of failed pushes
and dropped samples can be tracked per `-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Raphael Bizos <r.bizos@criteo.com>
(cherry picked from commit 87fd400dfc)
### Describe Your Changes
Added makefile rule for `GOARCH=loong64` to support building all
VictoriaMetrics components on the `loongarch64` platform.
### Checklist
The following checks are **mandatory**:
* [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: qiangxuhui <qiangxuhui@loongson.cn>
(cherry picked from commit 80f3644ee3)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
This code adds Exemplars to VMagent and the promscrape parser adhering
to OpenMetrics Specifications. This will allow forwarding of exemplars
to Prometheus and other third party apps that support OpenMetrics specs.
---------
Signed-off-by: Ted Possible <ted_possible@cable.comcast.com>
(cherry picked from commit 5a3abfa041)
When at least one remote write has deduplication configured it cleans up
timeseries while they can be in use by another remote write without
deduplication
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6205
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 879771808b)
The new flag type is supposed to be used for specifying URL values which
could contain sensitive information such as auth tokens in GET params or
HTTP basic authentication.
The URL flag also allows loading its value from files if `file://`
prefix is specified. As example, the new flag type was used in
app/vmbackup as it requires specifying `authKey` param for making the
snapshot.
See related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5973
Thanks to @wasim-nihal for initial implementation
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6060
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 029060af60)
See https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6140
We don't cover this corner case as it has low chance for reproduction.
Precisely, the requirements are following:
1. vmagent need to be configured with multiple identical `remoteWrite.url` flags;
2. At least one of the persistent queues need to be non-empty, which already
signalizes about issues with setup;
3. vmagent need to be restarted with removing of one of `remoteWrite.url` flags.
We do not document this case in vmagent.md as it seems to be a rare corner case
and its explanation will require too much of explanation and confuse users.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4251292708)
Starting from v1.99.0 vmalert could ignore anchors pointing to specific
rule groups if `search` param was present in URL.
This change makes anchors compatible with `search` param in UI.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 5f487c7090)
Stream aggregation may yield inaccurate results if it processes incomplete data.
This issue can arise when data is sourced from clients that maintain a queue of unsent data, such as Prometheus or vmagent.
If the queue isn't fully cleared within the aggregation interval, only a portion of the time series may be included in that period, leading to distorted calculations.
To mitigate this we add an option to ignore first N aggregation intervals. It is expected, that client queues
will be cleared during the time while aggregation ignores first N intervals and all subsequent aggregations
will be correct.
(cherry picked from commit c0e4ccb7b5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
The memory usage for plain sync.Pool doesn't increase comparing to the memory usage for the hybrid scheme,
so it is better to use plain sync.Pool in order to simplify the code and make it more readable and maintainable.
This is a follow-up for c22da2f917
Data ingestion benchmark doesn't show memory usage difference between two approaches,
so let's use simpler approach in order to improve code readability and maintainability.
This is a follow-up for 77c597738c
This scheme was used for reducing memory usage when vmagent runs on a machine with big number of CPU cores
and the ingestion rate isn't too big. The scheme with channel-based pool could reduce memory usage,
since it minimizes the number of PushCtx structs in the pool in this case.
Performance tests didn't reveal significant difference in memory usage under both low and high ingestion rate
between plain sync.Pool and the current hybrid scheme, so replace the scheme with plain sync.Pool in order
to simplify the code.
There was a sleep statement in the test, waiting for Group
to perform a couple of evaluation. But looks like
it worked unreliable for some CI tests like the one below
https://github.com/VictoriaMetrics/VictoriaMetrics/actions/runs/8718213844/job/23915007958?pr=6115
This commit changes the sleep statement on a function that
waits for a specific number of evaluations. It should make this
test faster in general case, and more reliable for slow environemnts.
This simplifies further maintenance and opens doors for additional config options
supported by lib/promauth. For example, an ability to specify client TLS certificates.
- Use exact matching by default for the query arg value provided via arg=value syntax at src_query_args.
Regex matching can be enabled by using =~ instead of = . For example, arg=~regex.
This ensures that the exact matching works as expected without the need to escape special regex chars.
- Add helper functions for creating QueryArg, Header and Regex structs in tests.
This improves maintainability of the tests.
- Remove url.QueryUnescape() call on the url in TestCreateTargetURLSuccess(), since this is bogus approach.
The url.QueryUnescape() must be applied to individual query args, and it mustn't be applied to the whole url,
since in this case it may perform invalid unescaping in the context of the url, or make the resulting url invalid.
While at it, properly marshal all the fields inside UserInfo config to yaml in tests.
Previously Header and QueryArg structs were improperly marshaled because the custom MarshalYAML
is called only on pointers to Header and QueryArg structs. This improves test coverage.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6070
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6115
* app/vmauth: do not increment backend_errors when hitting concurrency limit
Previously, both "vmauth_concurrent_requests_limit_reached_total" and "vmauth_user_request_backend_errors_total" were incremented.
This was based on the assumption that if concurrency limit is hit the backend must be failing to handle the request thus meaning an error.
This assumption does not work in case the endpoint can be overloaded by the misbehaving client sending too many requests within the timeframe.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5565
Signed-off-by: hagen1778 <roman@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
* any status code from the range 200-299 from alertmanager to vmalert is not considered an error from now on (#6110)
* add changelog
(cherry picked from commit 7308bad777)
* vmui: fix parsing of fractional values
* vmui/vmanomaly: update display logic to align with vmanomaly /query_range API
* vmui/vmanomaly: rename flag anomalyView to isAnomalyView
(cherry picked from commit f06f55edb6)
- Automatically reload changed TLS root CA pointed by -remoteWrite.tlsCAFile command-line flag
- Automatically reload changed TLS root CA configured via oauth2.tsl_config.ca_file option at -promscrape.config
- Document the change as a feature instead of a bug at docs/CHANGELOG.md
- Simplify the code at lib/promauth, which is responsible for reloading changed TLS root CA files.
- Simplify the usage of lib/promauth.Config.NewRoundTripper() - now it accepts the base http.Transport
instead of a callback, which can change the internal http.Transport.
- Reuse the default tls config if lib/promauth.Config doesn't contain tls-specific configs.
This should reduce memory usage a bit when tls isn't used for scraping big number of targets.
- Do not re-read TLS root CA files on every processed request. Re-read them once per second.
This should reduce CPU usage when scraping big number of targets over https.
- Do not store cert.pem and key.pem files in TestTLSConfigWithCertificatesFilesUpdate, since they can be loaded
from byte slices via crypto/tls.X509KeyPair().
- Remove obsolete comparisons of string representations for authConfig and proxyAuthConfig at areEqualScrapeConfigs().
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5725
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5526
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2171
- Fix docs for new functions at app/vmselect/graphite/functions.json
- Properly drain series lists on errors in aggregateSeriesListsGeneric() and aggregateSeriesList()
- Add links to docs for the added functions at docs/CHANGELOG.md
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5809
- Allow specifying only a single HTTP header for reading auth tokens via -httpAuthHeader command-line flag.
This is better from security PoV, since this prevents from accidental reading of auth token from undesired
HTTP header. By default the -httpAuthHeader equals to Authorization. When it is overridden, then
auth token isn't read from Authorization header - it is read only from the specified header.
- Document the -httpAuthHeader command-line flag at https://docs.victoriametrics.com/vmauth/#reading-auth-tokens-from-other-http-headers
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6009
This reverts commit cb23685681.
Reason for revert: the "fix" may hide programming bugs related to incorrect creation of folders
before their use. This may complicate detecting and fixing such bugs in the future.
There are the following fixes for the issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5985 :
- To configure the OS to do not drop data from the system-wide temporary directory (aka /tmp).
- To run VictoriaMetrics with -cacheDataPath command-line flag, which points to the directory,
which cannot be removed automatically by the OS.
The case when the user accidentally deletes the directory with some files created by VictoriaMetrics
shouldn't be considered as expected, so VictoriaMetrics shouldn't try resolving this case automatically.
It is much better from operation and debuggability PoV is to crash with the clear `directory doesn't exist` error
in this case.
The remotewrite.Stop() expects that there are no pending calls to TryPush().
This means that the ingestionRateLimiter.Register() must be unblocked inside TryPush() when calling remotewrite.Stop().
Provide remotewrite.StopIngestionRateLimiter() function for unblocking the rate limiter before calling the remotewrite.Stop().
While at it, move the rate limiter into lib/ratelimiter package, since it has two users.
Also move the description of the feature to the correct place at docs/CHANGELOG.md.
Also cross-reference -remoteWrite.rateLimit and -maxIngestionRate command-line flags.
This is a follow-up for 02bccd1eb9
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5900
* lib/storage: adds metrics for downsampling
vm_downsampling_partitions_scheduled - shows the number of parts, that must be downsampled
vm_downsampling_partitions_scheduled_size_bytes - shows total size in bytes for parts, the must be donwsampled
These two metrics answer the questions - is downsampling running? how many parts scheduled for downsampling and how many of them currently downsampled? Storage space that it occupies.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/2612
* wip
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
- Make the configuration more clear by accepting the list of ignored labels during sharding
via a dedicated command-line flag - -remoteWrite.shardByURL.ignoreLabels.
This prevents from overloading the meaning of -remoteWrite.shardByURL.labels command-line flag.
- Removed superfluous memory allocation per each processed sample if sharding by remote storage is enabled.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/5938