Previously, vmagent produced parsing error for 'multitenant' auth token
value for the cases:
* data ingestion with enableMultitentEndpoints
* data scrapping at promscrape
It's inconsistent to the other VictoriaMetrics components.
Since 'multitenant' is well-known token value for multitenancy via
labels. And vmagent is intended to be compatible with vminsert ingestion
endpoints.
This commit replaces NewToken with NewTokenPossibleMultitenant function
for token parsing. It allows to use multitenant value for it. And it
makes token values consistent for the all components.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7694
Previously, there was no option to replace value of `X-Forwarded-For`
HTTP Header. It was only possible to completely remove it. It's not good
solution, since backend may require this information. But using direct
value of this header is insecure. And requires complex knowledge of
infrastruce at backend side (see spoofing X-Forwarded-For articles).
This commit adds new flag, that replaces content of `X-Forwarded-For`
HTTP Header value with current `RemoteAddress` of client that send
request.
It should be used if `vmauth` is directly attached to the internet.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6883
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
### Describe Your Changes
- Fixes the handling of the `showLegend` flag.
- Fixes the handling of `alias`.
- Adds support for alias templates, allowing dynamic substitutions like
`{{label_name}}`.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7565
### Describe Your Changes
- **Memory Optimization**: Reduced memory consumption on the "Group" and
"JSON" tabs by approximately 30%.
- **Table Pagination**: Added pagination to the "Table" view with an
option to select the number of rows displayed (from 10 to 1000 items per
page, with a default of 1000). This change significantly reduced memory
usage by approximately 75%.
Related to #7185
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
doing similar changes for both vmagent and vminsert (like one in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/7399) ends up
with almost same implementations for each of packages instead of having
this shared code in one place. one of the reasons is the same Timeseries
and Labels structure from different prompb and prompbmarshal packages.
My proposal is to use structures from prompb package only to
marshal/unmarshal sent/received data, but for internal transformations
use only structures from prompbmarshal package
Another example, where it already can help to simplify code is streaming
aggregation pipeline for vmsingle (now it first marshals
prompb.Timeseries to storage.MetricRow and then if streaming aggregation
or deduplication is enabled it unmarshals all the series back but to
prompbmarshal.Timeseries)
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Additional info from the dump can be used to debug rotuing rules.
https://pkg.go.dev/net/http/httputil#DumpRequest
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Previously multitenant cache was inited before flag.Parse call. It
didn't allow to change cache expiration value and default value was
always used.
This commit adds cache init at the first time cache was called.
Also this commit adds small cache improvements:
* chore for cleanup cache, it now uses common pattern for in-place items
filtering
* fail cache request fast if item is already expired
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
This is a follow-up after 3120dc2
- Consistently use key for rollupCache in multitenant mode cache keys use different authTokens. Previously it could lead to panic in rare cases when cache state was inconsistent.
- Do not share `err` variable across goroutines for `processBlock` function. It could lead to data races.
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7549
---------
Signed-off-by: Andrei Baidarov <abaidarov@yandex.ru>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
Previously, when the alert got resolved shortly before the vmalert
process shuts down, this could result in false alerts.
This change switches vmalert to use MetricsQL function during alerts state restore, which makes it
incompatible for state restoration with PromQL.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
### Describe Your Changes
1. **Add new `Raw Query` tab**
A new `Raw Query` tab has been added to the
[vmui](https://docs.victoriametrics.com/#vmui) interface for displaying
raw data. The tab uses the `/api/v1/export` API endpoint. Related issue:
[#7024](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7024)
2. **Fix rendering of isolated points on the graph**
Previously, isolated points (not connected to other points on the left
or right) were not visible on the graph. Now, they are rendered
correctly.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
Previously, for `^` aka pow function calls, VictoriaMetrics returned `1`
if left arg was Nan. For example, given query=`(hour()==2)^1` returns 1
for NaN produced by hour() == 2 function. It added additional non-exist
datapoints to the timeseries.
This commit port bugfix from `metricql` package and adds test for it.
Now, VictoriaMetrics
correctly returns `NaN` for such cases.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7359
Signed-off-by: f41gh7 <nik@victoriametrics.com>
(cherry picked from commit bb399518db)
This commit fixes panic for multitenant requests and empty storage node responses for tenants api.
It also optimizes `populateSqTenantTokensIfNeeded` function calls, by making it only once for query request. Previously it was incorrectly called multiple times per each storage node request.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7549
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
1. Avoid storing the last evaluation results outside of rules, check for
stale time series as soon as possible;
2. remove duplicated template `Clone()`.
This pull request is primarily reducing memory usage when rules produce
large volumes of results, as seen in
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6894.
The CPU time spent on garbage collection remains high and may be
addressed in a separate PR.
The following user-level options must be unconditionally inherited by url_map, since this is what most users expect:
- retry_status_codes
- load_balancing_policy
- drop_src_path_prefix_parts
- discover_backend_ips
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7519
The fix at a0a154511a looks too complicated and fragile:
- It moves buMin initialization to the place, which is far from its usage.
- It embeds unclear logic on selecting the proper buMin if it is broken,
into unrelated loop.
The actual fix must be more clear:
$ git diff 95acca6b52 -- app/vmauth/
- if n := bu.concurrentRequests.Load(); n < minRequests {
+ if n := bu.concurrentRequests.Load(); n < minRequests || buMin.isBroken() {
This should simplify further maintenance of this code.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/7489
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
By default the delay equals to 1 second.
While at it, document refresh_interval query arg at /select/logsql/tail endpoint.
Thanks to @Fusl for the idea and the initial implementation at https://github.com/VictoriaMetrics/VictoriaMetrics/pull/7428
(cherry picked from commit a44787372f)
This eliminates possible bugs related to forgotten Query.Optimize() calls.
This also allows removing optimize() function from pipe interface.
While at it, drop filterNoop inside filterAnd.
(cherry picked from commit 66b2987f49)
Previously, vmauth could have pick `buMin` as least loaded backend
without checking its status. In result, vmauth could have respond to the
user with an error even if there were healthy backends. That could
happen if healthy backends already had non-zero amount of concurrent
requests executing at the moment of least-loaded backend choosing logic.
Steps to reproduce:
1. Setup vmauth with two backends: healthy and non-healthy
2. Execute a bunch of concurrent requests against vmauth (i.e. Grafana
dash reload)
3. Observe that some requests will fail with message that all backends
are unavailable
Addresses https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3061
---
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a0a154511a)
### Describe Your Changes
add sorting of logs by groups and within each group by time in desc
order. See #7184 and #7045
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
(cherry picked from commit 1e1952acf5)
Previously it incorrectly applied xFilesFactor, if it's value equal to 0.
This commit properly handles this case and returns result according to
the graphite documentation:
`xFilesFactor follows the same semantics as in Whisper storage schemas. Setting it to 0 (the default) means that only a single value in the series needs to be non-null for it to be considered non-empty, setting it to 1 means that all values in the series must be non-null. A setting of 0.5 means that at least half the values in the series must be non-null.`
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Evgeniy Negriy <einegriy@avito.ru>
(cherry picked from commit d27dfac5c6)
Loki protocol supports optional `metadata` object for each ingested line. It's added as 3rd field at the (ts,msg,metadata) tuple. Previously, loki request json parsers rejected log line if tuple size != 2.
This commit allows optional tuple field. It parses it as json object and adds it as log metadata fields to the log message stream.
related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7431
---------
Co-authored-by: f41gh7 <nik@victoriametrics.com>
(cherry picked from commit 3aeb1b96a2)
### Describe Your Changes
I don't like this solution, but it works. Other possible solutions
described in an issue
fixes https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7068
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit a88f896b43)
### Describe Your Changes
Fix https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7301
When querying with condition like `WHERE a=1` (looking for series A),
InfluxDB can return data with the tag `a=1` (series A) and data with the
tag `a=1,b=1` (series B).
However, series B is will be queried later and it's data should not be
combined into series A's data.
This PR filter those series that are not identical to the original query
condition.
For table `example`:
```
// time host region value
// ---- ---- ------ -----
// 2024-10-25T02:12:13.469720983Z serverA us_west 0.64
// 2024-10-25T02:12:21.832755213Z serverA us_west 0.75
// 2024-10-25T02:12:32.351876479Z serverA 0.88
// 2024-10-25T02:12:37.766320484Z serverA 0.95
```
The query for series A (`example_value{host="serverA"}`) and result will
be:
```SQL
SELECT * FROM example WHERE host = "serverA"
```
```json
{
"results": [{
"statement_id": 0,
"series": [{
"name": "cpu",
"columns": ["time", "host", "region", "value"],
"values": [
["2024-10-25T02:12:13.469720983Z", "serverA", "us_west", 0.64],
["2024-10-25T02:12:21.832755213Z", "serverA", "us_west", 0.75],
["2024-10-25T02:12:32.351876479Z", "serverA", null, 0.88],
["2024-10-25T02:12:37.766320484Z", "serverA", null, 0.95]
]
}]
}]
}
```
We need to abandon `values[0]` and `values[1]` because the value of
**unwanted** column `region` is not null.
As for series B (`example_value{host="serverA", region="us_west"}`), no
change needed since the query filter out unwanted rows already.
### Note
This is a draft PR for verifying the fix.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f16a58f14c)
This commit adds the following changes:
- Added support to push datadog logs with examples of how to ingest data
using Vector and Fluentbit
- Updated VictoriaLogs examples directory structure to have single
container image for victorialogs, agent (fluentbit, vector, etc) but
multiple configurations for different protocols
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6632
(cherry picked from commit e0930687f1)
In this case the _msg field is set to the value specified in the -defaultMsgValue command-line flag.
This should simplify first-time migration to VictoriaLogs from other systems.
(cherry picked from commit 16ee470da6)
