### Describe Your Changes
Update images with updated interface of the cloud solution
### Checklist
The following checks are **mandatory**:
- [ x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit c910c1c6b8)
This PR is based on
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6777. The
differences are the following:
* it keeps backward compatibility for links
* it re-structures only original document file
* it adds #common-mistakes section, re-phrased
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit ca2a08eabe)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 344d61da79)
### Describe Your Changes
docs/vmanomaly: updates for v1.16.3
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit f61d8c3ebb)
### Describe Your Changes
This PR adds the feature to parse a multi yaml doc following the
`\n---\n`
The issue is
[6753](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6753)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: kirti purohit <kirti.purohit@hpe.com>
Co-authored-by: kirti purohit <kirti.purohit@hpe.com>
Co-authored-by: Jiekun <jiekun@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 008b649658)
### Describe Your Changes
The flags docs mention the flag that does not exist (and never existed).
Perhaps that was a typo.
`s/retryMaxInterval/retryMaxTime/g`
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
(cherry picked from commit e2c73dc89f)
### Describe Your Changes
Currently, vmagent always uses a separate `http.Client` for every group
watcher in Kubernetes SD. With a high number of group watchers this
leads to large amount of opened connections.
This PR adds 2 changes to address this:
- re-use of existing `http.Client` - in case `http.Client` is connecting
to the same API server and uses the same parameters it will be re-used
between group watchers
- HTTP2 support - this allows to reuse connections more efficiently due
to ability of using streaming via existing connections.
See this issue for the details and test results -
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5971
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit eefae85450)
### Describe Your Changes
Add darwin `amd64` and `arm64` builds for cluster binaries build.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
(cherry picked from commit 2593f32b63)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
(cherry picked from commit 18dd4105be)
### Describe Your Changes
docs/vmanomaly: remove duplicate header in VmWriter docs
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 5c9bd35eb9)
### Describe Your Changes
docs for `vmanomaly`, updated after release 1.16.2
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit b2e7b05918)
### Describe Your Changes
fix of typos and improper version references in code snippets of example
usage
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 63a9fb34d1)
The change was present in v1.103 by mistake.
In fact, it was released in v1.104
See c193e6d43e
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4086cef01c)
### Describe Your Changes
`vmanomaly` patch release 1.16.1 updates
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 150ee902fd)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
(cherry picked from commit 504da7d02b)
### Describe Your Changes
update `vnanomaly` versions in examples
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit dde2a0cb25)
### Describe Your Changes
doc updates for vmanomaly v1.16.0
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 0e54cfe350)
### Describe Your Changes
Added an ability to query data across multiple tenants. See:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/1434
Currently, the following endpoints work with multi-tenancy:
- /prometheus/api/v1/query
- /prometheus/api/v1/query_range
- /prometheus/api/v1/series
- /prometheus/api/v1/labels
- /prometheus/api/v1/label/<label_name>/values
- /prometheus/api/v1/status/active_queries
- /prometheus/api/v1/status/top_queries
- /prometheus/api/v1/status/tsdb
- /prometheus/api/v1/export
- /prometheus/api/v1/export/csv
- /vmui
A note regarding VMUI: endpoints such as `active_queries` and
`top_queries` have been updated to indicate whether query was a
single-tenant or multi-tenant, but UI needs to be updated to display
this info.
cc: @Loori-R
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Create blockResultColumn.forEachDictValue* helper functions for visiting matching
dictionary values. These helper functions should prevent from counting dictionary values
without matching logs in the future.
This is a follow-up for 0c0f013a60
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7152
* Replaces deprecated graphs with Timeseries panels
* Adds new latency dashboards for rest client and golang scheduler
* Adds new overview panels
* Adds VM Datasource version of dashboard
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
When ingesting samples with the same labels(duplicated samples or
samples with the same labels after `by` or `without` options). They
could register different entries for the same labelset in
LabelsCompressor.
For example, both index 99 and 100 can be assigned to label `foo=1` in
two concurrent pushes. Then due to differing label indexes in encoded
keys, the samples will appear as distinct in aggrState, resulting in
duplicated results after decompressing the label indexes.
fbde238cdc/lib/streamaggr/streamaggr.go (L933)
In this pull request, since we need to store `idxToLabel` first to
ensure the idx can be searched after `lc.labelToIdxStore`,
the `lc.idxToLabel` still could contain a duplicated entries
[100]="foo=1". But given the low likelihood of this issue and the size
of idxToLabel, it should be fine.
Current doc is using per-url deduplication, and users might use this example
when they have more than 1 remoteWrite URL. Which would result into extra resource usage.
Changing the example to use global dedup, as it makes more sense.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Introduce the `-search.maxDeleteSeries` flag that limits the number of
time series that can be deleted with a single
`/api/v1/admin/tsdb/delete_series` call.
Currently, any number can be deleted and if the number is big (millions)
then the operation may result in unaccounted CPU and memory usage spikes
which in some cases may result in OOM kill (see #7027). The flag limits
the number to 30k by default and the users may override it if needed at
the vmstorage start time.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7027
---------
Signed-off-by: Artem Fetishev <rtm@victoriametrics.com>
Previous commit 201fd6de1e removed
trailing space trim from data read from file. But common practice is to
remove such trailing space. And it leaded to the authorization errors
for the major group of users.
In first place, this change must help to mitigate an issue with
kubernetes. When authorization information was read from Secret content.
Changes to the operator was made to mitigate such problem at commit
1cf64358c8
We could introduce later optional flag for VictoriaMetrics to disable
trim space behavior.
Related issues:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6986https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7089https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6947
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Co-authored-by: Zhu Jiekun <jiekun@victoriametrics.com>
encoding.GetUint64s() returns uninitialized slice, which may contain arbitrary values.
So values in this slice must be reset to zero before using it for counting hits in `uniq` and `top` pipes.
This allows executing queries with `stats` pipe, which calculate multiple results with the same functions,
but with different `if (...)` conditions. For example:
_time:5m | count(), count() if (error)
Previously such queries couldn't be executed becasue automatically generated name for the second result
didn't include `if (error)`, so names for both results were identical - `count(*)`.
Now the following queries are equivalents:
_time:5s | sort by (_time)
_time:5s | order by (_time)
This is needed for convenience, since `order by` is commonly used in other query languages such as SQL.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
The change should help users to understand what happens on labels
conflict.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 59bc63ebc4)
### Describe Your Changes
Marked fluentd in victorialogs roadmap
Added fluentd syslog example setup
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 05a64a8c14)
### Describe Your Changes
- Show the time range in the tooltip when hovering over staircase
graphs.
- Use bolder lines for staircase graphs.
- Increase the number of steps on the staircase graph to 100.
- Reduce the maximum width of the tooltip to 1/3 of the screen.
- Insert only the label name under the cursor into the query input field
when `Ctrl`-clicking the line legend.
See [this
comment](https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6545#issuecomment-2336805237).
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
….url` using `-remoteWrite.streamAggr.dropInputLabels`
Before, labels were set to all the `remoteWrite.url`.
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6780
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit fbde238cdc)
### Describe Your Changes
1) Changed table settings from a popup to a modal window to simplify
future functionality additions.
2) Added functionality to save selected columns when data is modified or
the page is reloaded. See #7016.
<details>
<summary>Example screenshots</summary>
<img alt="demo-1" width="600"
src="https://github.com/user-attachments/assets/a5d9a910-363c-4931-8b12-18ea8b3d97d8"/>
</details>
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit c896bf340d)
Previously only logs inside the selected time range could be returned by stream_context pipe.
For example, the following query could return up to 10 surrounding logs only for the last 5 minutes,
while most users expect this query should return up to 10 surrounding logs without restrictions on the time range.
_time:5m panic | stream_context before 10
This enables the ability to implement stream context feature at VictoriaLogs web UI: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7063 .
Reduce memory usage when returning stream context over big log streams with millions of entries.
The new logic scans over all the log messages for the selected log stream, while keeping in memory only
the given number of surrounding logs. Previously all the logs for the given log stream on the selected time range
were loaded in memory before selecting the needed surrounding logs.
This should help https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6730 .
Reduce the scan performance for big log streams by fetching only the requested fields. For example, the following
query should be executed much faster than before if logs contain many fields other than _stream, _msg and _time:
panic | stream_context after 30 | fields _stream, _msg, _time
Use local timezone of the host server in this case. The timezone can be overridden
with TZ environment variable if needed.
While at it, allow using whitespace instead of T as a delimiter between data and time
in the ingested _time field. For example, '2024-09-20 10:20:30' is now accepted
during data ingestion. This is valid ISO8601 format, which is used by some log shippers,
so it should be supported. This format is also known as SQL datetime format.
Also assume local time zone when time without timezone information is passed to querying APIs.
Previously such a time was parsed in UTC timezone. Add `Z` to the end of the time string
if the old behaviour is preferred.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6721
### Describe Your Changes
VictoriaLogs allows logs without `_msg` field or `_msg` field is empty.
This lead to incorrect search result. See:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6785
This pull request search for non-empty `_msg` field before log entry is
added to `LogRows`.
New counter `vl_rows_dropped_total{reason="msg_not_exist"}` is
introduced.
Example log output:
```
2024-09-23T02:33:19.719Z warn app/vlinsert/insertutils/common_params.go:189 dropping log line without _msg field; [{@timestamp 2024-09-18T13:42:16.600000000Z} {Attributes.array.attribute ["many","values"]} {Attributes.boolean.attribute true} {Attributes.double.attribute 637.704} {Attributes.int.attribute 10} {Attributes.map.attribute.some.map.key some value} {Attributes.string.attribute some string} {Body Example ddddddddddlog record} {Resource.service.name my.service} {Scope.my.scope.attribute some scope attribute} {Scope.name my.library} {Scope.version 1.0.0} {SeverityNumber 10} {SeverityText Information} {SpanId eee19b7ec3c1b174} {TraceFlags 0} {TraceId 5b8efff798038103d269b633813fc60c}]
```
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
- [ ] Benchmark for potential performance loss.
---------
Co-authored-by: Aliaksandr Valialkin <valyala@victoriametrics.com>
Previously the original timestamp was used in the copied query, so _time:duration filters
were applied to the original time range: (timestamp-duration ... timestamp]. This resulted
in stopped live tailing, since new logs have timestamps bigger than the original time range.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7028
This pipe is useful for debugging purposes when the number of processed blocks must be calculated for the given query:
<query> | blocks_count
This helps detecting the root cause of query performance slowdown in cases like https://github.com/VictoriaMetrics/VictoriaMetrics/issues/7070
### Describe Your Changes
- Use common compose.yaml file for all victorialogs setups to set
version in a single place and override it on demand for each agent and
protocol
- Replaced multiple victorialogs instances in HA setup with single setup
with `deploy.replica` parameter set
- Added fluentd setup
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit e75ae1b274)
* `remoteWrite.maxQueueSize` from `100_000` to `1_000_000`, this should
improve resiliency of recording rules that produce many series;
* `remoteWrite.maxBatchSize` from `1_000` to `10_000`, this should be
more efficient to send from netwroking perspective;
* `remoteWrite.concurrency` from `1` to `4`, this should imrpove speed
of sending the generated series.
The new settings should improve remote write performance of vmalert with
default settings.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Hui Wang <haley@victoriametrics.com>
(cherry picked from commit 6b1b47df54)
The change supposed to have more practical recommendations and reflect
the real processes for maintaining the project.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
It is better to show only unhealthy targets instead of all of them when
`show_only_unhealthy` filter is enabled.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3536
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit cbeb7d50e8)
### Describe Your Changes
New logos and usage guideline
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit df665a13c9)
### Describe Your Changes
By default, the `elasticsearchexporter` in OTel Collector puts the log
message under a field other than `_msg` (e.g., `Body`). Without
specifying via an HTTP header, those logs may not be queried correctly.
See also:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6785.
This pull request updates the example configuration and notes for the
`elasticsearchexporter`.
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit fea4433362)
It is expected that range_first and range_last functions return non-nan const value across all the points
if the original series contains at least a single non-NaN value. Previously this rule was violated for NaN data points
in the original series. This could confuse users.
While at it, add tests for series with NaN values across all the range_* and running_* functions, in order to maintain
consistent handling of NaN values across these functions.
* lib/license: add support of license key hot-reload
* docs: add info about license key hot reload
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
The previous behaviour was incorrect, since it is unexpected that the -streamAggr.dedupInterval
and -remoteWrite.streamAggr.dedupInterval is applied to processed samples only if -streamAggr.config isn't set.
This is a follow-up for d523015f27
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6711
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
Co-authored-by: Artem Navoiev <tenmozes@gmail.com>
### Describe Your Changes
change the `/query_range` and `/query` requests method from `GET` to
`POST`. See #6288.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit b0bdb92729)
…g from 1e3 to 5e3
This should improve visibility on errors produced by very long queries.
The change is classified as BUG in order to port it to LTS releases.
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Mathias Palmersheim <mathias@victoriametrics.com>
(cherry picked from commit e115b85770)
Improved VictoriaMetrics documentation for cloud
Related issue: https://github.com/VictoriaMetrics/cloud/issues/2143
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 4c228f1e18)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
(cherry picked from commit 277fed9990)
* Previously, only metricID->metricName missing index records were
tracked with deadline But it was possible a case for missing
metricID->TSID index records. IndexDB metrics fix exposed misleading
metric for such missing records.
* This commit adds check for metricID->TSID missing index records. And
delete missing metricID entry if it hit 60 second deadline.
Related issue
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6931
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Previously we manually imported system windows DDLs
and made direct syscall.
But golang exposes syscall wrappers with sys/windows package.
It seems, that direct syscall was broken at 1.23 golang release. It was
`GetDiskFreeSpace` syscall in our case.
This commit replaces all manual syscalls with wrappers
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6973
Related golang issue:
https://github.com/golang/go/issues/69029
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Also tried to make it catch "Authorisation" in the future, fixed a lot
of other misspells along the way, but didn't make it catch
"Authorisation" anyway.
- Fix misspelled "Authorization" header name
- Fix misspelled "organization"
- Fix more misspells
…pair
`alert_relabel_configs` in [notifier
config](https://docs.victoriametrics.com/vmalert/#notifier-configuration-file)
can drop alert labels when used to filter different tenant alert message
to different notifier.
alertmanager would report error like `msg="Failed to validate alerts"
err="at least one label pair required"` in this case, but the rest of
the alerts inside one request would still be valid in alertmanager, so
it's not severe.
(cherry picked from commit ae4d376e41)
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Artem Navoiev <tenmozes@gmail.com>
(cherry picked from commit f9a8c09fe8)
This is needed for avoiding confusion between the `|` operator at `math` pipe and `|` pipe delimiter.
For example, the following query was parsed unexpectedly:
* | math foo / bar | fields x
as
* | math foo / (bar | fields) as x
Substituting `|` with `or` inside `math` pipe fixes this ambiguity.
* app/vmgateway: allow skipping Bearer prefix, parsing access as string
- allow disabling of "Bearer" prefix check - This is needed in order to support OIDC systems where identity token is provided separately from access token and it does not contain "Bearer" prefix(such as Azure Entra ID, ex AD).a
- support parsing "vm_access" claim as a string - This is helpful for systems where claims can only be mapped to string.
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
* docs/changelog: mention vmgateway updates
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Previously per-token hashes for per-block bloom filters were re-calculated on every scanned block.
This could be slow when the number of tokens is big or when the number of blocks to scan is big.
Pre-calculate hashes for bloom filters and then use them for searching in bloom filters.
This improves performance by 2.5x for in(...) filters with many values to search inside `in()`.
Previous bugfix at 49f63b2 only partially fixed pagination host validation error.
Before this fix it was:
```
unexpected nextLink host \"management.azure.com\", expecting \"https://management.azure.com\"
```
Now we only check the `Host` without schema.
However, when Azure respond `nextLink` in `Host:Port` format, the
`nextLink` check will fail:
```
unexpected nextLink host \"management.azure.com:443\", expecting \"management.azure.com\"
```
This pull request further relaxes the checks by only checking the
`Hostname`.
---
related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6912
follow up
4ecc370acb
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Previously (f1:foo OR f2:bar) was incorrectly returning `foo` token for `f1` and `bar` token for `f2`.
These tokens were used for checking against bloom filter for every data block, so the data block,
which didn't contain simultaneously `foo` token for `f1` field and `bar` token for `f2` field, was skipped.
This was incorrect, since such a block may contain logs matching the original OR filter.
The fix is to return common tokens from `OR`-delimted filters only if these tokens exist at EVERY such filter
for the given field name. If some `OR`-delimited filter misses the given field name, then `OR`-delimited filters
do not contain common tokens, which could be used for checking against bloom filter.
While at it, add more tests covering various edge cases for filters delimited by AND and OR.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6554
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6556
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Commit adds the following changes:
* Adds support of OpenTelemetry logs for Victoria Logs with protobuf encoded messages
* json encoding is not supported for the following reasons:
- It brings a lot of fragile code, which works inefficiently.
- json encoding is impossible to use with language SDK.
* splits metrics and logs structures at lib/protoparser/opentelemetry/pb package.
* adds docs with examples for opentelemetry logs.
---
Related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/4839
Co-authored-by: AndrewChubatiuk <andrew.chubatiuk@gmail.com>
Co-authored-by: f41gh7 <nik@victoriametrics.com>
* updates change log
* adds VL-Debug http header
* updates doc
* extracts only the first value of http headers for VL-Stream-Fields and VL-Ignore-Fields.
It makes behaviour the same as Query string args. And allows to easily configure client applications.
Since most of the client collectors don't support multi value headers.
Signed-off-by: f41gh7 <nik@victoriametrics.com>
* Many collectors don't support forwarding url query params to the remote system. It makes impossible to define stream fields for it. Workaround with proxy between VictoriaLogs and log shipper is too complicated solution.
* This commit adds the following changes:
* Adds fallback to to headers params, if query param is empty for:
_msg_field -> VL-Msg-Field
_stream_fields -> VL-Stream-Fields
_ignore_fields -> VL-Ignore-Fields
_time_field -> VL-Time-Field
* removes deprecations from victorialogs compose files, added more
output format examples for logstash, telegraf, fluent-bit
related issue: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5310
…specifying `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval` command-line flag
[The
documentation](https://docs.victoriametrics.com/stream-aggregation/)
contains conflicting descriptions regarding deduplication for
non-matched series when `-remoteWrite.streamAggr.config` and / or
`-streamAggr.config` are set:
1. Statement below says **all the received data** is deduplicated:
>[vmagent](https://docs.victoriametrics.com/vmagent/) supports
relabeling, deduplication and stream aggregation for all the received
data, scraped or pushed. Then, the collected data will be forwarded to
specified -remoteWrite.url destinations. The data processing order is
the following:
>1. all the received data is relabeled according to the specified
[-remoteWrite.relabelConfig](https://docs.victoriametrics.com/vmagent/#relabeling)
(if it is set)
>2. all the received data is deduplicated according to specified
[-streamAggr.dedupInterval](https://docs.victoriametrics.com/stream-aggregation/#deduplication)
(if it is set to duration bigger than 0)
2. Another statement says the deduplication is performed individually
for the **matching samples**
>The de-deduplication is performed after applying
[relabeling](https://docs.victoriametrics.com/vmagent/#relabeling) and
before performing the aggregation. If the -remoteWrite.streamAggr.config
and / or -streamAggr.config is set, then the de-duplication is performed
individually per each [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config)
for the matching samples after applying
[input_relabel_configs](https://docs.victoriametrics.com/stream-aggregation/#relabeling).
Considering the following deduplication use cases:
1. To apply deduplication(globally or for specific remoteWrite
destination) for all the received data, scraped or pushed
--- using `-streamAggr.dedupInterval` or
`-remoteWrite.streamAggr.dedupInterval`.
2. To deduplicate and aggregate metrics that match the rule `match`
filters
--- using `-remoteWrite.streamAggr.config` and specifiying
`dedup_interval` option in [stream aggregation
config](https://docs.victoriametrics.com/stream-aggregation/#stream-aggregation-config).
3. To deduplicate all the received data while having `streamAggr.config`
for some metrics
--- no way for a single vmagent now, need to set up two level vmagents
This PR implements case3.
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit d523015f27)
fix#6554
andfilter shouldn't return orfilter field which result in bloomfilter
return false.
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 975ed27a76)
The prev links like `/changelog_2021/`
stopped working after 9dc8d1debd
because these files now require specifying the parent `changelog` in the path, like `/changelog/changelog_2021/`.
This fix adds an alias for an old link.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9d94573572)
### Describe Your Changes
Add mentions of VictoriaMetrics Cloud to the documentation of vmalert
where this info is helpful to a user.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 8a8a1d5df2)
### Describe Your Changes
Describe steps to run VictoriaMetrics Single node or Cluster on
VictoriaMetrics Cloud
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f6278d99dd)
### Describe Your Changes
This pull request fixes incorrect URLs in two places:
1. In the OTel guide, which has been corrected in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6880, but one
incorrect URL is still missing.
2. In the URL example, the cache reset endpoint for vmselect / Cluster
version is `/internal/resetRollupResultCache`, but it is mistakenly
noted as `/select/internal/resetRollupResultCache`, which misguides the
user. （introduced in #4468)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit f572365a93)
* typo fix
* mention version starting from features are available
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit e71cfdcfa5)
Previously, some extIndexDB metrics were not registered. It resulted
into missing metrics, if metric value was added to the extIndexDB. It's
a usual case for search requests at both indexes.
Current commit updates all metrics from extIndexDB according to the
current IndexDB. It must fix such cases
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6868
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 4ecc370acb)
### Describe Your Changes
The anchor to "Other fields" section should be #other-fields (instead of
#other-field)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: Cuong Le <cuongleqq@gmail.com>
(cherry picked from commit 6154bc9466)
`TL;DR` This PR improves the metric IDs search in IndexDB:
- Avoid seaching for metric IDs twice when `maxMetrics` limit is
exceeded
- Use correct error type for indicating that the `maxMetrics` limit is
exceded
- Simplify the logic of deciding between per-day and global index search
A unit test has been added to ensure that this refactoring does not
break anything.
---
Function calls before the fix:
```
idb.searchMetricIDs
|__ is.searchMetricIDs
|__ is.searchMetricIDsInternal
|__ is.updateMetricIDsForTagFilters
|__ is.tryUpdatingMetricIDsForDateRange
| |
|__ is.getMetricIDsForDateAndFilters
```
- `searchMetricIDsInternal` searches metric IDs for each filter set. It
maintains a metric ID set variable which is updated every time the
`updateMetricIDsForTagFilters` function is called. After each successful
call, the function checks the length of the updated metric ID set and if
it is greater than `maxMetrics`, the function returns `too many
timeseries` error.
- `updateMetricIDsForTagFilters` uses either per-day or global index to
search metric IDs for the given filter set. The decision of which index
to use is made is made within the `tryUpdatingMetricIDsForDateRange`
function and if it returns `fallback to global search` error then the
function uses global index by calling `getMetricIDsForDateAndFilters`
with zero date.
- `tryUpdatingMetricIDsForDateRange` first checks if the given time
range is larger than 40 days and if so returns `fallback to global
search` error. Otherwise it proceeds to searching for metric IDs within
that time range by calling `getMetricIDsForDateAndFilters` for each
date.
- `getMetricIDsForDateAndFilters` searches for metric IDs for the given
date and returns `fallback to global search` error if the number of
found metric IDs is greater than `maxMetrics`.
Problems with this solution:
1. The `fallback to global search` error returned by
`getMetricIDsForDateAndFilters` in case when maxMetrics is exceeded is
misleading.
2. If `tryUpdatingMetricIDsForDateRange` proceeds to date range search
and returns `fallback to global search` error (because
`getMetricIDsForDateAndFilters` returns it) then this will trigger
global search in `updateMetricIDsForTagFilters`. However the global
search uses the same maxMetrics value which means this search is
destined to fail too. I.e. the same search is performed twice and fails
twice.
3. `too many timeseries` error is already handled in
`searchMetricIDsInternal` and therefore handing this error in
`updateMetricIDsForTagFilters` is redundant
4. updateMetricIDsForTagFilters is a better place to make a decision on
whether to use per-day or global index.
Solution:
1. Use a dedicated error for `too many timeseries` case
2. Handle `too many timeseries` error in `searchMetricIDsInternal` only
3. Move the per-day or global search decision from
`tryUpdatingMetricIDsForDateRange` to `updateMetricIDsForTagFilters` and
remove `fallback to global search` error.
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Nikolay <nik@victoriametrics.com>
Once the timeseries is in tsidCache, new entries won't be created in
per-day index because the RegisterMetricNames() code does consider
different dates for the same timeseries. So this case has been added.
The same bug exists for AddRows() but it is not manifested because the
index entries are finally created in updatePerDateData().
RegisterMetricNames also updated to increase the newTimeseriesCreated
counter because it actually creates new time series in index.
A unit tests has been added that check all possible data patterns
(different metric names and dates) and code branches in both
RegisterMetricNames and AddRows. The total number of new unit tests is
around 100 which increaded the running time of storage tests by 50%.
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
### Describe Your Changes
This is an attempt to document IndexDB. I guess I was trying to touch
the important points that might be of interest for the end users while
refraining from making it too detailed (such as I did not enumerate and
describe all the specific record types).
Please take a look and any suggestions are very welcome.
### Checklist
The following checks are **mandatory**:
- [x ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Artem Fetishev <wwctrsrx@gmail.com>
(cherry picked from commit e7f1297517)
In the previous commit 8958cecad6
the default ports (80/443) were removed for both the `scrapeURL` and
`instance` label values for those targets without a port in
`__address__`. Different values in the `instance` label generate new
time series.
This commit reverts the changes made to the `instance` label. Now,
for those targets:
- `scrapeURL` will remain unchanged.
- The `instance` label value will include the default port.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
(cherry picked from commit e97e966f82)
### Describe Your Changes
release notes for patches 1.15.6 - 9
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit ac485a8486)
add command-line flag `-search.inmemoryBufSizeBytes` for configuring size of in-memory buffers used by vmselect during processing of vmstorage responses. A new summary metric `vm_tmp_blocks_inmemory_file_size_bytes` is exposed to show the size of the buffer during requests processing.
The new setting can be used by experienced users to adjust memory usage by vmselect when processing
many small read requests. Instead of allocating 4MB buffers each time, vmselect can be instructed to lower
the buffer size via `-search.inmemoryBufSizeBytes`. To make the decision whether this flag needs to be adjusted
users can consult with `vm_tmp_blocks_inmemory_file_size_bytes` which shows the actual size of buffers used
during query processing.
----------
The detailed information of this PR can be found in
https://github.com/VictoriaMetrics/VictoriaMetrics/pull/6851
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: hagen1778 <roman@victoriametrics.com>
## Describe Your Changes
Add RemoteWrite Retry Controls
This PR introduces two new flags to the remote write functionality:
- remoteWrite.retryMinInterval
- remoteWrite.retryMaxTime
These flags provide finer control over the retry behavior for
remoteWrite operations, allowing users to customize the minimum interval
between retries and the maximum duration for retry attempts.
Fixes#5486.
## Checklist
- [x] The following checks are mandatory:
My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Yury Akudovich <ya@matterlabs.dev>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit d0f5a9d77a)
### Describe Your Changes
Adds a link to the API example section that describes how to delete
metrics on VM Single.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 336406e2e1)
This change is made in attempt to reduce memory usage by vmalert when
parsing big instant responses from VM/Prometheus.
In
a5c427bac4
vmalert switched from std json lib to fastjson lib in order to reduce
amount of allocations, as according to highloaded profiles of vmalert
the CPU is mostly spent on GC.
But switching to fastjson resulted into excessive memory usage for cases
when vmalert has to parse long json lines, which usually happens when
instant response contains many `metric` objects.
In this change we do a mixed parsing:
1. Slice of `metric` objects is parsed with std lib to keep mem low
2. Each `metric` object is parsed with fastjson to reduce allocs
The benchmark results are the following:
```
pkg: github.com/VictoriaMetrics/VictoriaMetrics/app/vmalert/datasource
BenchmarkParsePrometheusResponse/Instant_std+fastjson-10 1760 668959 ns/op 280147 B/op 5781 allocs/op
MBs allocated at heap: 493.078392
mallocs: 18655472
BenchmarkParsePrometheusResponse/Instant_fastjson-10 6109 198258 ns/op 172839 B/op 5548 allocs/op
MBs allocated at heap: 1056.384464
mallocs: 34457184
BenchmarkParsePrometheusResponse/Instant_std-10 1287 950987 ns/op 451677 B/op 9619 allocs/op
MBs allocated at heap: 580.802976
mallocs: 13351636
```
The benchmark function code with mem measurement is available here
https://gist.github.com/hagen1778/b9c3ca7f8ca7d6b21aec9777112c5810
The benchmark contains 3 results:
1. Instant_std+fastjson is the implementation in this change
2. Instant_fastjson-10 is the implementation from
a5c427bac4
3. BenchmarkParsePrometheusResponse/Instant_std-10 is implementation
before
a5c427bac4
According to these results, this new implementation is slower than
previous, but faster than before switching to fastjson. It also has
lower number of allocations and roughly the same memory allocation on
heap with GC turned off.
---------
Other changes:
1. rm BenchmarkMetrics as it doesn't measure anything
2. simplify BenchmarkParsePrometheusResponse into
BenchmarkPromInstantUnmarshal
### Describe Your Changes
Please provide a brief description of the changes you made. Be as
specific as possible to help others understand the purpose and impact of
your modifications.
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Looks like auto-numeration doesn't work if item in the list
takes more than one line.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit fa9de9b45c)
Moving key-concepts-related docs to a separate dir should make it easier
to navigate in `docs/` folder and helps to avoid adding prefixes to
image assets.
-----------
The change shouldn't have any visual changes or changes to the links.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 22975d28ae)
Moving changelog-related docs to a separate dir should make it easier to
navigate in `docs/` folder.
-----------
The change shouldn't have any visual changes or changes to the links.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9dc8d1debd)
### Describe Your Changes
Forcefully set permissions for release binaries to 1000:1000. This helps
to avoid issues such as
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6788 on
systems with limitations around UID:GID configuration.
"1000" UID and GID is widely used by linux distributions for the first
user in the system.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 654c1cb9d1)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
- fix TS lint
- anomaly: remove /vmui
- anomaly: minor inspections fix
- docs: fix broken links to headings
### Describe Your Changes
Initially vmanomaly opened with `/vmui` in serverUrl, remove it.
(cherry picked from commit 535a9ed059)
* Adds custom dial func for HTTP-Connect and socks5 proxy tunnels.
Standard golang http.transport exposes GetProxyConnectHeader function,
but it doesn't allow to use separate tls config for proxy.
It also not possible to enforce HTTP-Connect with standard http lib.
* For http scrape targets, by default http.Transport.Proxy function must
be used. Since it has special case with full uri forward.
* Adds proxy.URL json methods that allow to properly copy internal
fields, like User/Password.
It should fix bug with proxy_url. When credentials specified at URL was
ignored.
* Adds tests for scrape client proxy requests
related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6771
* It was necessary to add default ports for fasthttp client. After migration to the std.httpclient it's no longer needed.
* An additional configuration is required at proxy servers with implicitly set 80/443 ports to the host header (such as HA proxy.
It's expected that after upgrade __address_ label may change. But it should be rare case. 80/443 ports are not widely used at monitoring ecosystem. And it shouldn't have much impact.
Related issue https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6792
Co-authored-by: Nikolay <nik@victoriametrics.com>
to allow configuring additional headers in each request to the
corresponding notifier.
Other flags like `-datasource.headers`, `-remoteWrite.headers` already
use `^^` as delimiter, it's consistent to use it in `-notifier.headers`
as well.
related https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3260
vmalert can integrate with alertmanager that supports multi-tenant by
adding tenantID header`X-Scope-OrgID` in requests.
In multitenancy, vmalert can also filter alerts which send to different
notifier addresses(or with different header settings) using
`alert_relabel_configs`.
Updates https://github.com/VictoriaMetrics/VictoriaMetrics/issues/3260
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 0f1ec33892)
…flags to perform the same as vmalert
address https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6735
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 0fc1130f47)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
docs: vmanomaly - v1.15.5 patch notes
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 0e464a3a4f)
### Describe Your Changes
Updated model list in Anomaly Detection Overview
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 7279899a8a)
### Describe Your Changes
release notes for 1.15.4 patch
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
- change links from relative to absolute under Anomaly Detection section
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
changelog updates to v1.15.3 patch of `vmanomaly`
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
small update to `data_range` parameter in uppermost config conversion
example
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
update vmanomaly docs to forthcoming release v1.15.2
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Production workload shows that it's useful optimisation.
Channel based objects pool allows to handle irregural data ingestion
requests and make memory allocations more smooth.
It's improves sync.Pool efficiency, since objects from sync.Pool removed
after 2 GC cycles. With GOGC=30 value, GC runs significantly more often.
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6733
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: f41gh7 <nik@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
Describe Your Changes
When I use usePromCompatibleNaming with vmagent to process data that
needs to be formatted from different sources such as InfluxDB, I find
that it doesn’t work
However, it works in vminsert. I found that vminsert uses the
HasRelabeling method to determine whether to relabel.
```go
func HasRelabeling() bool {
pcs := pcsGlobal.Load()
return pcs.Len() > 0 || *usePromCompatibleNaming
}
```
in vmagent, the decision to relabel is determined only by
pcsGlobal.Len() > 0. However, in the applyRelabeling method, the
usePromCompatibleNaming logic is also used to determine whether to
relabel in the error handling.
```go
func (rctx *relabelCtx) applyRelabeling(tss []prompbmarshal.TimeSeries, pcs *promrelabel.ParsedConfigs) []prompbmarshal.TimeSeries {
if pcs.Len() == 0 && !*usePromCompatibleNaming {
// Nothing to change.
return tss
}
```
So I think that the logic for determining whether to relabel in vmagent
is not as expected.
Checklist
The following checks are mandatory:
[✅]My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Co-authored-by: Roman Khavronenko <hagen1778@gmail.com>
(cherry picked from commit d134a310f3)
vmselect will create `./tmp` dir under `cacheDataPath`. If
`cacheDataPath` is set to `/`, vmselect will use `/tmp`.
content under `/tmp` dir might be auto removed based on the OS
behaviour. See:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/5770
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
…eep_metric_names` options in stream aggregation config together
With aggregated data and raw data under the same metric, results would
be confusing.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 62d19369a3)
### Describe Your Changes
typos fix & clarity improvement of vmanomaly docs after v1.15.1 release
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit a99fcfbf1a)
### Describe Your Changes
Updated user management guide with new cloud content
This PR should be merged after the cloud PR
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
### Describe Your Changes
This helps to improve reliability of performing backups in environments
with unreliable connection and tolerate temporary errors at S3 provider
side.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6732
Default retry timeout is up to 3 minutes to make this consistent with
the same configuration for GCS:
a05317f61f/lib/backup/gcsremote/gcs.go (L70-L76)
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
(cherry picked from commit cb00b4b00f)
Before, buffer growth was always x2 of its size, which could lead to
excessive memory usage when processing big amount of data.
For example, scraping a target with hundreds of MBs in response could
result into hih memory spikes in vmagent because buffer has to double
its size to fit the response. See
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6759
The change smoothes out the growth rate, trading higher allocation rate
for lower mem usage at certain conditions.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit f28f496a9d)
### Describe Your Changes
* `sort` param is unused by the current website engine, and was present only for compatibility
with previous website engine. It is time to remove it as it makes no effect
* re-structure guides content into folders to simplify assets management
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 35d77a3bed)
### Describe Your Changes
Fixing remaining typos and missing words after v.1.15.0 updates
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 264e9caf5a)
### Describe Your Changes
- updated docs on `vmanomaly` with v1.15.0
- additional chapters of FAQ and model pages
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit b670fa1a29)
VM has different responses to equivalent queries for MetricsQL and
GraphiteQL in case of failed access to one of vmstorage node of the
cluster vmstorage nodes. For GraphiteQL, the denyPartialResponse feature
is not used, it is always true, which is not always correct (depending
on the configuration).
In the PR I have removed the hardcoded denyPartialResponse for
GraphiteQL, just like MetricsQL does.
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
Make `-remoteWrite.streamAggr.ignoreFirstIntervals` of array type so it could
accept multiple values which can be applied to the corresponding`-remoteWrite.url`.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 8f5c26d788)
Fix `-streamAggr.dropInputLabels` behavior when global deduplication is enabled without `-streamAggr.config`.
Previously, `-remoteWrite.streamAggr.dropInputLabels` is misapplied.
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 4863605469)
By introducing this feature, users will have the ability to customize
the sampleLimit parameter on a per-target basis, providing more
flexibility and control over the job execution behavior.
(cherry picked from commit 994796367b)
### Describe Your Changes
fixed yaml header in a guide doc, that causes hugo build error
### Checklist
The following checks are **mandatory**:
- [ ] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 86b473c476)
### Describe Your Changes
- Adds support for displaying the top 5 log streams in the hits graph,
grouping the remaining streams into an "other" label.
#6545
- Adds options to customize the graph display with bar, line, stepped
line, and points views.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 04c2232e45)
The changes are based on SEO report and supposed to improve
ranking and indexation by search engines by using prompt and unique titles
and by updating unreachable links.
It also updates links to have a simplified form and replaces relative links with absolute links
according to https://docs.victoriametrics.com/#documentation
---------
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit 2e16732fdb)
Adds Prometheus Grafana Alloy and vmagent to the data ingestion
protocols. Grafana Agent was not added since it has been deprecated in
favor of alloy
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: Roman Khavronenko <roman@victoriametrics.com>
(cherry picked from commit a46d554f74)
### Describe Your Changes
https://victoriametrics.slack.com/archives/C05UNTPAEDN/p1722833182319299
Sometimes users may use the wrong (lower) version of Grafana when
setting up the VictoriaLogs datasource.
It would be good to document the requirements of Grafana versions to use
VictoriaMetrics/VictoriaLogs datasource.
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 7551d799f7)
### Describe Your Changes
Fix a typo in docs.
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
(cherry picked from commit 3c48e5662f)
### Describe Your Changes
This is useful for clients which validate InfluxDB is available before
data ingestion can be started.
See: https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6653
### Checklist
The following checks are **mandatory**:
- [x] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: Zakhar Bessarab <z.bessarab@victoriametrics.com>
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 9877a5e7d5)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
### Describe Your Changes
Added `--vm-backoff-retries`, `--vm-backoff-factor`,
`--vm-backoff-min-duration` and `--vm-native-backoff-retries`,
`--vm-native-backoff-factor`, `--vm-native-backoff-min-duration`
command-line flags to the `vmctl` app. Those changes will help to
configure the retry backoff policy for different situations.
Related issue:
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6622
### Checklist
The following checks are **mandatory**:
- [X] My change adheres [VictoriaMetrics contributing
guidelines](https://docs.victoriametrics.com/contributing/).
---------
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 6f401daacb)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
* add a toggle button to the "Group" tab that allows users to expand or collapse all groups at once
* introduce the ability to select a key for grouping logs within the "Group" tab
* display the number of entries within each log group.
* move the Markdown toggle to the general settings panel in the upper left corner.
(cherry picked from commit e06a19d85f)
Changes to .ts files in vmui or vmui for logs require re-building
static files that will be included into compiled binary afterwards.
We don't update static files on each .ts change PR because it results
in too many changes and complicates review.
So we need to update these static files before the actual release.
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Fixes panic if incorrect metricsql expression passed to the prettifier API.
Prettify function had misleading panic for duration expression formatting. It expected all WITH templates to be already parsed.
But WITH expression expand was removed.
Bug was introduced at e712a49898
and present at v1.98.0+ releases
https://github.com/VictoriaMetrics/VictoriaMetrics/issues/6736
Signed-off-by: f41gh7 <nik@victoriametrics.com>
* add Logo guidelines to GitHub Readme, as it may have higher chances to be viewed by users
* rm Logo guidelines from cluster version docs, as it makes no sense anymore for this page
* rm `picutre` tag from cluster version docs, as it is not used by GitHub anymore
Signed-off-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 77b768089f)
### Describe Your Changes
- replace docs in root README with a link to official documentation
- remove old make commands for documentation
- remove redundant "VictoriaMetrics" from document titles
- merge changelog docs into a section
- rm content of Single-server-VictoriaMetrics.md as it can be included from docs/README
- add basic information to README in the root folder, so it will be useful for github users
- rm `picture` tag from docs/README as it was needed for github only, we don't display VM logo at docs.victoriametrics.com
- update `## documentation` section in docs/README to reflect the changes
- rename DD pictures, as they now belong to docs/README
Signed-off-by: hagen1778 <roman@victoriametrics.com>
Co-authored-by: hagen1778 <roman@victoriametrics.com>
(cherry picked from commit 58e667c895)
Signed-off-by: hagen1778 <roman@victoriametrics.com>
